Skip to contentSkip to conversation

Logiteh MX900 / USB Bluetooth "dongle" support?

Bluez-devel Lars Grunewaldt 3 participants 6 messages Aug 7, 2004 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi there,

I just bought a Logitech MX900 - works fine with the dongle, as it registers as a native USB HID.

But as the USB "dongle" that comes with the mouse also works as a bluetooth device, it would be nice to have support for this.

I'm not sure if there already is support, if not, I'd like to have a look at it myself. The thingy reports as two USB devices, "Logitech Inc." and "Texas Instruments, Inc. TUSB2036 HUB". I think the second one might be the Bluetooth device.

Any experiences with ti chipsets?

or maybe I just overlooked something and everything is already "there"...

cu,
~ Lars
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBFM5XQWC6DTWkDAoRAmIeAJ9YaWpwmzTFDEt8PYs+MftzGPCkNACgq+tK qCdipP6C4GeGkXS5RK8sRe4=
=4Pzn
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#1 lore raw

Hi Lars,

Quoted 6 lines

I just bought a Logitech MX900 - works fine with the dongle, as it registers as a native USB HID.

But as the USB "dongle" that comes with the mouse also works as a bluetooth device, it would be nice to have support for this.

Quoted 8 lines

I'm not sure if there already is support, if not, I'd like to have a look at it myself. The thingy reports as two USB devices, "Logitech Inc." and "Texas Instruments, Inc. TUSB2036 HUB". I think the second one might be the Bluetooth device.

Any experiences with ti chipsets?

or maybe I just overlooked something and everything is already "there"...

I think so, because hid2hci should already support switching it into HCI mode.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#2 lore raw
Quoted 15 lines · Marcel Holtmann

Hi Lars,

Quoted 13 lines

I just bought a Logitech MX900 - works fine with the dongle, as it registers as a native USB HID.

But as the USB "dongle" that comes with the mouse also works as a bluetooth device, it would be nice to have support for this.

I'm not sure if there already is support, if not, I'd like to have a look at it myself. The thingy reports as two USB devices, "Logitech Inc." and "Texas Instruments, Inc. TUSB2036 HUB". I think the second one might be the Bluetooth device.

Any experiences with ti chipsets?

Quoted 9 lines
Quoted 1 line

or maybe I just overlooked something and everything is already "there"...

I think so, because hid2hci should already support switching it into HCI mode.

Regards

Marcel

Yeah, that works.

Puggy

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#3 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Douglas Russell wrote:

|>>or maybe I just overlooked something and everything is already "there"...
|>
|>I think so, because hid2hci should already support switching it into HCI
|>mode.
|>
|>Regards
|>
|>Marcel
|>
|
| Yeah, that works.

Hm I just tried
| hid2hci -0
Switching device 046d:c705 to HCI mode failed (no such file or directory)

:/

any ideas?
~ Lars
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBFNg/QWC6DTWkDAoRAn1KAKC8ZyTLau6rrlPugMNiKAdFw4Dh0QCePmKm wpLcIxhrU8kI8273HaWiM9s=
=RzX5
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#4 lore raw

Hi Lars,

Quoted 3 lines

Hm I just tried
| hid2hci -0
Switching device 046d:c705 to HCI mode failed (no such file or directory)

check that you've compiled a kernel with CONFIG_USB_HIDDEV and check that the hiddev device nodes are present.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#5 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Marcel Holtmann wrote:

| Hi Lars,
|
|
|>Hm I just tried
|>| hid2hci -0
|>Switching device 046d:c705 to HCI mode failed (no such file or directory)
|
|
| check that you've compiled a kernel with CONFIG_USB_HIDDEV and check
| that the hiddev device nodes are present.

thanks, I missed hiddev raw devices. works fine now :)

cu,
~ Lars
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBFOdeQWC6DTWkDAoRAhMtAJ9k79ZOM0+YJ/2ySA7UFhocZqt3nQCeLyOH PgxeA4k3H+18q+0Op9uiw0M=
=ipFK
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel