Terminal program
Hi All,
I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and LinPac with the ax25 programs for packet....i usually use a Baycom modem but it has gone belly up so have pressed a PaComm TNC320 into service.....it works well in KISS mode.
However there one or two commands that i need to put into the tnc but cant do it with LinPac...
Does anyone know of a Linux terminal program that can be used to work a tnc in Command Mode.....preferably one that does not use X windows..... Have looked on Radio.linux.org.au but cant seem to see one there...i might be a bit dumb here hi hi....
Thanks for all your help
David Munn
VK4BDJ
in Sunny North Queensland Australia
Quoted 10 lines · David Munn
I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and LinPac with the ax25 programs for packet....i usually use a Baycom modem but it has gone belly up so have pressed a PaComm TNC320 into service.....it works well in KISS mode.
However there one or two commands that i need to put into the tnc but cant do it with LinPac...
Does anyone know of a Linux terminal program that can be used to work a tnc in Command Mode.....preferably one that does not use X windows..... Have looked on Radio.linux.org.au but cant seem to see one there...i might be a bit dumb here hi hi....
minicom. Great terminal program, doesn't need X-windows.
--
Curt, WE7U http://www.eskimo.com/~archer
"Lotto: A tax on people who are bad at math." -- unknown
"Windows: Microsoft's tax on computer illiterates." -- WE7U "The world DOES revolve around me: I picked the coordinate system!"
Le Aug 12, David Munn écrivait :
Quoted 1 line
Hi All,
Hello David,
......................
Quoted 5 lines
Does anyone know of a Linux terminal program that can be used to work a tnc in Command Mode.....preferably one that does not use X windows..... Have looked on Radio.linux.org.au but cant seem to see one there...i might be a bit dumb here hi hi....
sometimes i use "minicom" wihout problems.
Quoted 1 line
Thanks for all your helpa
You're welcome.
Best regards
Jacques f6cwo
Signature · 6 lines
Quelques HOWTO en français: http://perso.wanadoo.fr/jacques.chion/ - To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
---
Quoted 11 lines · David Munn
Hi All,
I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and LinPac with the ax25 programs for packet....i usually use a Baycom modem but it has gone belly up so have pressed a PaComm TNC320 into service.....it works well in KISS mode.
However there one or two commands that i need to put into the tnc but cant do it with LinPac...
Does anyone know of a Linux terminal program that can be used to work a tnc in Command Mode.....preferably one that does not use X windows..... Have looked on Radio.linux.org.au but cant seem to see one there...i might be a bit dumb here hi hi....
What do you need. To operate packet in command mode, or just to give your tnc a few commands before switching to kiss mode?
You definitely want minicom.
Quoted 25 lines · David Munn
Hi All,
I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and LinPac with the ax25 programs for packet....i usually use a Baycom modem but it has gone belly up so have pressed a PaComm TNC320 into service.....it works well in KISS mode.
However there one or two commands that i need to put into the tnc but cant do it with LinPac...
Does anyone know of a Linux terminal program that can be used to work a tnc in Command Mode.....preferably one that does not use X windows..... Have looked on Radio.linux.org.au but cant seem to see one there...i might be a bit dumb here hi hi....Thanks for all your help
David Munn
VK4BDJ
in Sunny North Queensland Australia-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Dave, I have tried minicom and seyon, and both were a little
disappointing to me. I started using Kermit and never went back to the others.
-pat KE2LJ
Quoted 7 lines · Dave Stubbs
You definitely want minicom.
Quoted 3 lines · David Munn
Hi All,
I have a AMD K2 500 mhz comp with a 4 ghz h/d running Slackware 9 and LinPac with the ax25 programs for packet....i usually use a Baycom modem
Quoted 3 lines · Pat Masterson
Dave, I have tried minicom and seyon, and both were a little
disappointing to me. I started using Kermit and never went back to the others.
Back to the roots. I'm using cu which comes as part of UUCP.
Ralf