AVM BlueFritz with Linux Kernel 2.6.3-15mdk

Hello there :)

I'm using Mandrake 10.0 Official with the updated Kernel 2.6.3-15mdk. I have an USB Bluetooth dongle from AVM (BlueFritz) which don't work... :(

I've copied the firmware to the /usr/lib/hotplug/firmware directory. hotplugd starts at boot time. I've changed to an older version of the AVM-firmware, because Marcel told me, that this Kernel won't work with the newest firmware.

I've downloaded and installed the newest version of bluez-libs, bluez-utils, bluezs-pin, bluez-firmware, bluez-hcidump and bluez-hciemu. (I've compiled myself, no rpm-packages) Source for the software:
http://www.bluez.org/download.html.

When I'm typing "hciconfig" in a console, nothing happens...

Looks like this:

[root@localhost sigrid]# hciconfig
[root@localhost sigrid]#

Nothing happens :(

In my /var/log/syslog, I found this entries:
[root@localhost sigrid]# grep Blue /var/log/syslog

Aug 11 19:51:49 localhost kernel: Bluetooth: Core ver 2.3
Aug 11 19:51:49 localhost kernel: Bluetooth: HCI device and connection
manager initialized
Aug 11 19:51:49 localhost kernel: Bluetooth: HCI socket layer
initialized
Aug 11 19:51:49 localhost kernel: Bluetooth: BlueFRITZ! USB driver ver
1.1
Aug 11 19:51:56 localhost kernel: Bluetooth: L2CAP ver 2.1
Aug 11 19:51:56 localhost kernel: Bluetooth: L2CAP socket layer
initialized
Aug 11 19:51:57 localhost kernel: Bluetooth: RFCOMM ver 1.1
Aug 11 19:51:57 localhost kernel: Bluetooth: RFCOMM socket layer
initialized
Aug 11 19:52:01 localhost kernel: Bluetooth: RFCOMM TTY layer
initialized
Aug 11 22:42:04 localhost kernel: Bluetooth: CMTP (CAPI Emulation) ver

1.0
[root@localhost sigrid]#

I've deinstalled my older packages an installed the new packages from the above mentioned site.

This are the entries from my /var/log/messages:

Aug 11 19:51:56 localhost bluetooth: hcid Start succeeded
Aug 11 19:51:56 localhost bluetooth: sdpd Start succeeded
Aug 11 20:01:01 localhost msec: changed mode of
/etc/rc.d/init.d/bluetooth from 755 to 744
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-bluefw-0.9-2mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-hcidump-1.5-2mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-hciemu-1.0-2mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-pan-1.1-2mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-sdp-1.5-1mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
bluez-utils-2.4-4mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
gnome-bluetooth-0.4.1-4mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
kdebluetooth-0.0.cvs20040302-3mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
kdebluetooth-devel-0.0.cvs20040302-3mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
libbluez1-2.5-1mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
libbluez1-devel-2.5-1mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
libbluez-sdp2-1.5-1mdk.i586
Aug 11 20:06:39 localhost rpmdrake-remove[4721]: Removing package
libbluez-sdp2-devel-1.5-1mdk.i586
Aug 11 20:06:44 localhost rpmdrake-remove[4721]: [RPM]
bluez-pan-1.1-2mdk removed
Aug 11 20:06:44 localhost bluetooth: hcid heruntergefahren succeeded
Aug 11 20:06:44 localhost bluetooth: sdpd heruntergefahren succeeded
Aug 11 20:06:44 localhost bluetooth: hciattach heruntergefahren failed
Aug 11 20:06:45 localhost rpmdrake-remove[4721]: [RPM]
bluez-utils-2.4-4mdk removed
Aug 11 20:06:54 localhost rpmdrake-remove[4721]: [RPM]
kdebluetooth-0.0.cvs20040302-3mdk removed
Aug 11 20:06:56 localhost rpmdrake-remove[4721]: [RPM]
gnome-bluetooth-0.4.1-4mdk removed
Aug 11 20:06:56 localhost rpmdrake-remove[4721]: [RPM]
bluez-hcidump-1.5-2mdk removed
Aug 11 20:06:57 localhost rpmdrake-remove[4721]: [RPM]
libbluez1-2.5-1mdk removed
Aug 11 20:06:57 localhost rpmdrake-remove[4721]: [RPM]
bluez-sdp-1.5-1mdk removed
Aug 11 20:06:58 localhost rpmdrake-remove[4721]: [RPM]
kdebluetooth-devel-0.0.cvs20040302-3mdk removed
Aug 11 20:06:58 localhost rpmdrake-remove[4721]: [RPM]
bluez-bluefw-0.9-2mdk removed
Aug 11 20:06:59 localhost rpmdrake-remove[4721]: [RPM]
bluez-hciemu-1.0-2mdk removed
Aug 11 20:07:00 localhost rpmdrake-remove[4721]: [RPM]
libbluez-sdp2-1.5-1mdk removed
Aug 11 20:07:00 localhost rpmdrake-remove[4721]: [RPM]
libbluez1-devel-2.5-1mdk removed
Aug 11 20:07:00 localhost rpmdrake-remove[4721]: [RPM]
libbluez-sdp2-devel-1.5-1mdk removed
Aug 11 20:52:41 localhost rpmdrake[12577]: Extracting header of
kdebluetooth-devel-0.0.cvs20040302-3mdk.i586 from
/var/lib/urpmi/hdlist.contrib.cz
Aug 11 20:52:58 localhost rpmdrake[12577]: Extracting header of
libbluez1-devel-2.5-1mdk.i586 from /var/lib/urpmi/hdlist.main.cz
Aug 11 20:53:07 localhost rpmdrake[12577]: Extracting header of
libbluez-sdp2-devel-1.5-1mdk.i586 from /var/lib/urpmi/hdlist.main.cz
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
removable://mnt/cdrom/Mandrake/RPMS3/libbluez1-2.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
removable://mnt/cdrom/Mandrake/RPMS3/libbluez1-devel-2.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
removable://mnt/cdrom/Mandrake/RPMS3/libbluez-sdp2-1.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
removable://mnt/cdrom/Mandrake/RPMS3/libbluez-sdp2-devel-1.5-1mdk.i586.
rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/10.0/i586/Mandrake/RPMS/libbluez1-2.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/10.0/i586/Mandrake/RPMS/libbluez1-devel-2.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/10.0/i586/Mandrake/RPMS/libbluez-sdp2-1.5-1mdk.i586.rpm
Aug 11 20:53:18 localhost rpmdrake[12577]: Installing package
ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/10.0/i586/Mandrake/RPMS/libbluez-sdp2-devel-1.5-1mdk.i586.rpm
Aug 11 20:54:19 localhost rpmdrake[12577]: [RPM] libbluez1-2.5-1mdk
installed
Aug 11 20:54:20 localhost rpmdrake[12577]: [RPM] libbluez-sdp2-1.5-1mdk
installed
Aug 11 20:54:21 localhost rpmdrake[12577]: [RPM]
libbluez1-devel-2.5-1mdk installed
Aug 11 20:54:23 localhost rpmdrake[12577]: [RPM]
libbluez-sdp2-devel-1.5-1mdk installed
Aug 11 21:01:00 localhost msec: changed mode of

/etc/rc.d/init.d/bluetooth from 755 to 744
[root@localhost sigrid]#

I'm missing an entry for loading the firmware.... (or I'm blind and don't see this entry...

Has anyone an idea what can I do? I want my Bluetooth dongle working under Linux (under Windows it works! - so there's no problem with the dongle).

If you need more infos, tell me, what you need, I'll give it to you

Greetings

Sigrid

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Sigrid,

are the hotplug scripts installed (look for /etc/hotplug/firmware.agent) and show us the content of /proc/bus/usb/devices after you plugged in the dongle.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

On Thu, 12 Aug 2004 00:13:37 +0200
Marcel Holtmann <[email protected]> wrote:

Hi Marcel,

Yes, the hotplug script is installed (I found one) ;)

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-15mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:07.3
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-15mdk uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  2
P:  Vendor=057c ProdID=2200 Rev= 1.00
S:  Manufacturer=AVM Berlin
S:  Product=Bluetooth Device
S:  SerialNumber=00127762
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=bfusb
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
C:  #Ifs= 1 Cfg#= 2 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

One more additional info:
First I've removed the USB-Stick and plugged it in again.

Hope, you can help me.

Thanks.

Sigrid

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Sigrid,

are you sure that hciconfig is showing nothing? Check dmesg for Bluetooth related messages.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Yes, I'm sure, unfortunately.

/var/log/dmesg shows:

Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 00009400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 11, io base 00009800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using address 2
usb 1-2: configuration #1 chosen from 2 choices
Bluetooth: Core ver 2.3
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: BlueFRITZ! USB driver ver 1.1
bfusb_probe: Firmware request failed
bfusb: probe of 1-2:1.0 failed with error -5 drivers/usb/core/usb.c: registered new driver bfusb

Unable to handle kernel NULL pointer dereference at virtual address

00000028
printing eip:
c016b532
*pde = 00000000

Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<c016b532>]    Not tainted VLI
EFLAGS: 00010246

EIP is at dnotify_flush+0x12/0x70
eax: c16c3c80 ebx: df36b4a0 ecx: 00000001 edx: 00000000
esi: df240d80 edi: df36b4a0 ebp: df1cff8c esp: df1cff80
ds: 007b es: 007b ss: 0068
Process firmware.agent (pid: 451, threadinfo=df1ce000 task=df1d1980)

Stack: df36b4a0 00000000 df240d80 df1cffa8 c01536a6 df36b4a0 df240d80
df36b4a0 
       00000000 00000009 df1cffbc c0153727 df36b4a0 df240d80 00000001
df1ce000 
       c010afb9 00000001 00000000 00000000 00000000 00000009 bffffa98
00000006 
Call Trace:
 [<c01536a6>] filp_close+0x36/0x70
 [<c0153727>] sys_close+0x47/0x60
 [<c010afb9>] sysenter_past_esp+0x52/0x79

Code: 12 25 ff ff ff 7f 09 c1 85 d2 75 f0 89 8b 28 01 00 00 5b 5d c3 8d

74 26 00 55 89 e5 57 56 53 8b 7d 08 8b 75 0c 8b 47 08 8b 50 08 <66> 8b 42 28 25 00 f0 00 00 3d 00 40 00 00 74 0e 8d 65 f4 5b 5e
<6>Adding 506008k swap on /dev/hda5. Priority:-1 extents:1
Adding 511520k swap on /dev/hde1. Priority:-2 extents:1 Adding 818960k swap on /dev/hdg7. Priority:-3 extents:1 Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 32M @ 0xd8000000
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde5, internal journal
EXT3-fs: mounted filesystem with ordered data mode. Supermount version 2.0.4 for kernel 2.6
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdg5, internal journal
EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds
EXT3 FS on hdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Sigrid,

and this is the problem. The firmware loading generates an oops. You must install a newer kernel (at least 2.6.8-rc3) before we can proceed.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

On Thu, 12 Aug 2004 20:53:21 +0200
Marcel Holtmann <[email protected]> wrote:

Hi Marcel,

[...]

Now, I have updated to 2.6.8-0.rc2.2mdk (sorry, but I'm not used in compiling my own kernel, so I prefer rpm-packages, is easier... ;))

Now, it looks a little bit better:

/var/log/dmesg (partly)

uhci_hcd 0000:00:07.3: irq 11, io base 00009800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using address 2
usb 1-2: configuration #1 chosen from 2 choices
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: BlueFRITZ! USB driver ver 1.1
bfusb_probe: Firmware request failed
bfusb: probe of 1-2:1.0 failed with error -5
usbcore: registered new driver bfusb

Adding 506008k swap on /dev/hda5.  Priority:-1 extents:1
Adding 511520k swap on /dev/hde1.  Priority:-2 extents:1
Adding 818960k swap on /dev/hdg7.  Priority:-3 extents:1

Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 32M @ 0xd8000000

No kernel-oops :)
Should I change the firmware again? Do you know which version of the AVM-firmware have problems with the kernel? The first version I've tested, was 3-18-39, after that, I've changed to 3-17-53.

Regards

Sigrid

Hi Sigrid,

this depends on if we get this working without any trouble. Otherwise you must compile a vanilla kernel, because I don't know what patches they included.

But the firmware request still fails. Where do you put your bfubase.frm file? Is hotplug installed and do you have a firmware.agent script under /etc/hotplug.

Use the older one, because I don't know if this kernel includes my workaround.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

On Fri, 13 Aug 2004 21:10:07 +0200
Marcel Holtmann <[email protected]> wrote:

Hi Marcel,

OK, I'll try it. If it's not working I'm going to download the vanilla kernel.

I've copied the bfubase.frm file to /usr/lib/hotplug/firmware And, yes, I have the firmware.agent scrip under /etc/hotplug.

The firmware request fails with the old and the new file. It makes no difference. :(

Regards

Sigrid

Hi Sigrid,

check the permissions of both. What does these two commands say?

ls -la /etc/hotplug
ls -la /usr/lib/hotplug/firmware

Attach the firmware.agent script so we can look inside.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

On Fri, 13 Aug 2004 21:32:15 +0200
Marcel Holtmann <[email protected]> wrote:

Hi Marcel,=20

OK, here are the results:=20

[root@localhost sigrid]# ls -la /etc/hotplug
insgesamt 268
drwxr-xr-x 5 root root 4096 Aug 5 22:49 ./
drwxr-xr-x 73 root root 4096 Aug 13 20:46 ../

-rw-r--r--   1 root root    695 M=E4r 25 10:52 blacklist
-rwxr-xr-x   1 root root   6369 M=E4r 25 10:52 dasd.agent*
-rwxr-xr-x   1 root root   1124 M=E4r 25 10:52 firmware.agent*
-rwxr-xr-x   1 root root   5521 M=E4r 25 10:52 hotplug.functions*
drwxr-xr-x   2 root root   4096 Aug  5 22:49 ieee1394/
-rwxr-xr-x   1 root root   2904 M=E4r 25 10:52 ieee1394.agent*
-rwxr-xr-x   1 root root   6830 M=E4r 25 10:52 input.agent*
-rwxr-xr-x   1 root root   3148 M=E4r 25 10:52 input.rc*
-rwxr-xr-x   1 root root   2283 M=E4r 25 10:52 net.agent*
drwxr-xr-x   2 root root   4096 M=E4r 25 10:52 pci/
-rwxr-xr-x   1 root root   3978 M=E4r 25 10:52 pci.agent*
-rwxr-xr-x   1 root root   2031 M=E4r 25 10:52 pci.rc*
-rwxr-xr-x   1 root root   2323 M=E4r 25 10:52 scsi.agent*
-rwxr-xr-x   1 root root   6967 M=E4r 25 10:52 tape.agent*
drwxr-xr-x   2 root root   4096 Aug 11 20:06 usb/
-rwxr-xr-x   1 root root  13544 M=E4r 25 10:52 usb.agent*
-rw-r--r--   1 root root  38952 M=E4r 25 10:52 usb.distmap
-rw-r--r--   1 root root   4364 M=E4r 25 10:52 usb.handmap
-rwxr-xr-x   1 root root  13355 M=E4r 25 10:52 usb.rc*
-rw-r--r--   1 root root 102230 Aug  5 22:52 usb.usermap

[root@localhost sigrid]#

and=20

[root@localhost sigrid]# ls -la /usr/lib/hotplug/firmware insgesamt 424

drwxr-xr-x  2 root   root     4096 Aug  9 22:13 ./
drwxr-xr-x  6 root   root     4096 Aug  6 20:31 ../
-rw-------  1 sigrid sigrid 418352 Aug 13 21:28 bfubase.frm

[root@localhost sigrid]#

Done ;)

#!/bin/sh
#
# Firmware-specific hotplug policy agent.
#
# Kernel firmware hotplug params include:
#

#       ACTION=3D%s [add or remove]
#       DEVPATH=3D%s [in 2.5 kernels, /sys/$DEVPATH]
#       FIRMWARE=3D%s

#
# HISTORY:
#
# 24-Jul-2003 Initial version of "new" hotplug agent.
#
# $Id: firmware.agent,v 1.1 2003/10/07 19:34:19 kroah Exp $ #

cd /etc/hotplug
. hotplug.functions
# DEBUG=3Dyes export DEBUG

# directory of the firmware files
FIRMWARE_DIR=3D/usr/lib/hotplug/firmware

# mountpoint of sysfs
SYSFS=3D$(sed -n 's/^.* \([^ ]*\) sysfs .*$/\1/p' /proc/mounts)

# use /proc for 2.4 kernels
if [ "$SYSFS" =3D "" ]; then
    SYSFS=3D/proc
fi

#
# What to do with this firmware hotplug event?
#
case "$ACTION" in

add)
if [ ! -e $SYSFS/$DEVPATH/loading ]; then
sleep 1
fi

if [ -f $FIRMWARE_DIR/$FIRMWARE ]; then
echo 1 > $SYSFS/$DEVPATH/loading
cp $FIRMWARE_DIR/$FIRMWARE $SYSFS/$DEVPATH/data echo 0 > $SYSFS/$DEVPATH/loading
else
echo -1 > $SYSFS/$DEVPATH/loading
fi

;;

remove)

    ;;

*)
mesg "Firmware '$ACTION' event not supported"
exit 1
;;

esac

Greetings

Sigrid

Hi Sigrid,

this looks weird make it owned by root:root and mode 644.

Regards

Marcel

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

On Fri, 13 Aug 2004 21:51:37 +0200
Marcel Holtmann <[email protected]> wrote:

Hi Marcel,

I've changed it to:

[root@localhost sigrid]# ls -la /usr/lib/hotplug/firmware insgesamt 424

drwxr-xr-x  2 root root   4096 Aug  9 22:13 ./
drwxr-xr-x  6 root root   4096 Aug  6 20:31 ../
-rw-r--r--  1 root root 418352 Aug 13 21:28 bfubase.frm

[root@localhost sigrid]#

Greetings

Sigrid