SMP kernel 2.6 does not work with my network cards. UP kernel works nice.

Francois,

Thank you very much for replying so fast and for the patch. Unfortunately, the problem remains. I can test anything you suggest. I really don't understand how can this be happening here and nobody else complains, maybe it's a problem with my hardware? Funny thing is that all works well in UP.

Here goes the new log with your patch:

Aug 26 14:44:20 genipapo kernel: Linux version 2.6.8.1 ([email protected]) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 SMP Thu Aug 26 11:15:11 BRT 2004
Aug 26 14:44:20 genipapo kernel: BIOS-provided physical RAM map:
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 26 14:44:20 genipapo kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Aug 26 14:44:20 genipapo kernel: 127MB HIGHMEM available.
Aug 26 14:44:20 genipapo kernel: 896MB LOWMEM available.
Aug 26 14:44:20 genipapo kernel: ACPI: S3 and PAE do not like each other for now, S3 disabled.
Aug 26 14:44:20 genipapo kernel: found SMP MP-table at 000f5610
Aug 26 14:44:20 genipapo syslog: klogd startup succeeded
Aug 26 14:44:20 genipapo kernel: DMI 2.3 present.
Aug 26 14:44:20 genipapo kernel: ACPI: RSDP (v000 VIA694                                    ) @ 0x000f6f60
Aug 26 14:44:20 genipapo kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
Aug 26 14:44:20 genipapo kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
Aug 26 14:44:20 genipapo kernel: ACPI: MADT (v001 VIA694          0x00000000  0x00000000) @ 0x3fff56c0
Aug 26 14:44:20 genipapo kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Aug 26 14:44:20 genipapo kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 26 14:44:20 genipapo kernel: Processor #0 6:8 APIC version 17
Aug 26 14:44:20 genipapo kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 26 14:44:20 genipapo kernel: Processor #1 6:8 APIC version 17
Aug 26 14:44:20 genipapo kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 26 14:44:20 genipapo kernel: IOAPIC[0]: Assigned apic_id 2
Aug 26 14:44:20 genipapo kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 26 14:44:20 genipapo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 26 14:44:20 genipapo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Aug 26 14:44:20 genipapo kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Aug 26 14:44:20 genipapo kernel: Using ACPI (MADT) for SMP configuration information
Aug 26 14:44:20 genipapo kernel: Built 1 zonelists
Aug 26 14:44:20 genipapo kernel: Kernel command line: vga=ext
Aug 26 14:44:20 genipapo kernel: Initializing CPU#0
Aug 26 14:44:20 genipapo kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Aug 26 14:44:20 genipapo kernel: Detected 1134.610 MHz processor.
Aug 26 14:44:20 genipapo kernel: Using tsc for high-res timesource
Aug 26 14:44:20 genipapo kernel: Console: colour VGA+ 80x50
Aug 26 14:44:20 genipapo kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 26 14:44:20 genipapo kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 26 14:44:20 genipapo kernel: Memory: 1035088k/1048512k available (1779k kernel code, 12524k reserved, 848k data, 272k init, 131008k highmem)
Aug 26 14:44:20 genipapo kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 26 14:44:20 genipapo kernel: Calibrating delay loop... 2228.22 BogoMIPS
Aug 26 14:44:20 genipapo kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Aug 26 14:44:20 genipapo kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Aug 26 14:44:20 genipapo kernel: CPU: L2 cache: 256K
Aug 26 14:44:20 genipapo kernel: CPU serial number disabled.
Aug 26 14:44:20 genipapo kernel: Intel machine check architecture supported.
Aug 26 14:44:20 genipapo kernel: Intel machine check reporting enabled on CPU#0.
Aug 26 14:44:20 genipapo kernel: Enabling fast FPU save and restore... done.
Aug 26 14:44:20 genipapo kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 26 14:44:20 genipapo kernel: Checking 'hlt' instruction... OK.
Aug 26 14:44:20 genipapo kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
Aug 26 14:44:20 genipapo kernel: per-CPU timeslice cutoff: 731.81 usecs.
Aug 26 14:44:20 genipapo kernel: task migration cache decay timeout: 1 msecs.
Aug 26 14:44:20 genipapo kernel: enabled ExtINT on CPU#0
Aug 26 14:44:20 genipapo kernel: ESR value before enabling vector: 00000000
Aug 26 14:44:20 genipapo kernel: ESR value after enabling vector: 00000000
Aug 26 14:44:20 genipapo kernel: Booting processor 1/1 eip 2000
Aug 26 14:44:20 genipapo kernel: Initializing CPU#1
Aug 26 14:44:20 genipapo kernel: masked ExtINT on CPU#1
Aug 26 14:44:20 genipapo kernel: ESR value before enabling vector: 00000000
Aug 26 14:44:20 genipapo kernel: ESR value after enabling vector: 00000000
Aug 26 14:44:20 genipapo kernel: Calibrating delay loop... 2260.99 BogoMIPS
Aug 26 14:44:20 genipapo kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Aug 26 14:44:20 genipapo kernel: CPU: L2 cache: 256K
Aug 26 14:44:20 genipapo kernel: CPU serial number disabled.
Aug 26 14:44:20 genipapo kernel: Intel machine check architecture supported.
Aug 26 14:44:20 genipapo kernel: Intel machine check reporting enabled on CPU#1.
Aug 26 14:44:20 genipapo kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
Aug 26 14:44:20 genipapo kernel: Total of 2 processors activated (4489.21 BogoMIPS).
Aug 26 14:44:20 genipapo kernel: ENABLING IO-APIC IRQs
Aug 26 14:44:20 genipapo kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Aug 26 14:44:20 genipapo kernel: Using local APIC timer interrupts.
Aug 26 14:44:20 genipapo kernel: calibrating APIC timer ...
Aug 26 14:44:20 genipapo kernel: ..... CPU clock speed is 1134.0360 MHz.
Aug 26 14:44:20 genipapo kernel: ..... host bus clock speed is 103.0123 MHz.
Aug 26 14:44:20 genipapo kernel: checking TSC synchronization across 2 CPUs: passed.
Aug 26 14:44:20 genipapo kernel: Brought up 2 CPUs
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 16
Aug 26 14:44:20 genipapo kernel: EISA bus registered
Aug 26 14:44:20 genipapo kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
Aug 26 14:44:20 genipapo kernel: PCI: Using configuration type 1
Aug 26 14:44:20 genipapo kernel: mtrr: v2.0 (20020519)
Aug 26 14:44:20 genipapo kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Aug 26 14:44:20 genipapo kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Aug 26 14:44:20 genipapo kernel: mtrr: probably your BIOS does not setup all CPUs.
Aug 26 14:44:20 genipapo kernel: mtrr: corrected configuration.
Aug 26 14:44:20 genipapo kernel: ACPI: Subsystem revision 20040326
Aug 26 14:44:20 genipapo kernel: ACPI: Interpreter enabled
Aug 26 14:44:20 genipapo kernel: ACPI: Using IOAPIC for interrupt routing
Aug 26 14:44:20 genipapo kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Aug 26 14:44:20 genipapo kernel: PCI: Probing PCI hardware (bus 00)
Aug 26 14:44:20 genipapo kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Aug 26 14:44:20 genipapo kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Aug 26 14:44:20 genipapo kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 26 14:44:20 genipapo kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Aug 26 14:44:20 genipapo kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 26 14:44:20 genipapo kernel: PCI: Using ACPI for IRQ routing
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
Aug 26 14:44:20 genipapo kernel: testing the IO APIC.......................
Aug 26 14:44:20 genipapo kernel: .................................... done.
Aug 26 14:44:20 genipapo kernel: vesafb: probe of vesafb0 failed with error -6
Aug 26 14:44:20 genipapo kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Aug 26 14:44:20 genipapo kernel: apm: disabled - APM is not SMP safe.
Aug 26 14:44:20 genipapo kernel: Starting balanced_irq
Aug 26 14:44:20 genipapo kernel: highmem bounce pool size: 64 pages
Aug 26 14:44:20 genipapo kernel: VFS: Disk quotas dquot_6.5.1
Aug 26 14:44:20 genipapo kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 26 14:44:20 genipapo kernel: Initializing Cryptographic API
Aug 26 14:44:20 genipapo kernel: PCI: Enabling Via external APIC routing
Aug 26 14:44:20 genipapo kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 26 14:44:20 genipapo kernel: isapnp: Scanning for PnP cards...
Aug 26 14:44:20 genipapo kernel: isapnp: No Plug & Play device found
Aug 26 14:44:20 genipapo kernel: Real Time Clock Driver v1.12
Aug 26 14:44:20 genipapo kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Aug 26 14:44:20 genipapo kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 26 14:44:20 genipapo kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 26 14:44:20 genipapo kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
Aug 26 14:44:20 genipapo kernel: VP_IDE: chipset revision 6
Aug 26 14:44:20 genipapo kernel: VP_IDE: not 100%% native mode: will probe irqs later
Aug 26 14:44:20 genipapo kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Aug 26 14:44:20 genipapo kernel:     ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
Aug 26 14:44:20 genipapo kernel:     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
Aug 26 14:44:20 genipapo kernel: hda: Maxtor 4D040H2, ATA DISK drive
Aug 26 14:44:20 genipapo kernel: hdb: ST310232A, ATA DISK drive
Aug 26 14:44:20 genipapo kernel: Using anticipatory io scheduler
Aug 26 14:44:20 genipapo kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 26 14:44:20 genipapo kernel: hdc: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
Aug 26 14:44:20 genipapo kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
Aug 26 14:44:20 genipapo kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 26 14:44:20 genipapo kernel: hda: max request size: 128KiB
Aug 26 14:44:20 genipapo kernel: hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Aug 26 14:44:20 genipapo kernel:  hda: hda1 hda2 hda3
Aug 26 14:44:20 genipapo kernel: hdb: max request size: 128KiB
Aug 26 14:44:20 genipapo kernel: hdb: 20005650 sectors (10242 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66)
Aug 26 14:44:20 genipapo kernel:  hdb: hdb1
Aug 26 14:44:20 genipapo kernel: ide-floppy driver 0.99.newide
Aug 26 14:44:20 genipapo kernel: hdd: No disk in drive
Aug 26 14:44:20 genipapo kernel: hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm
Aug 26 14:44:20 genipapo kernel: mice: PS/2 mouse device common for all mice
Aug 26 14:44:20 genipapo kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 26 14:44:20 genipapo kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Aug 26 14:44:20 genipapo kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 26 14:44:20 genipapo kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Aug 26 14:44:20 genipapo kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Aug 26 14:44:20 genipapo kernel: EISA: Probing bus 0 at eisa0
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 2
Aug 26 14:44:20 genipapo kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Aug 26 14:44:20 genipapo kernel: TCP: Hash tables configured (established 262144 bind 65536)
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 1
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 17
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 8
Aug 26 14:44:20 genipapo kernel: NET: Registered protocol family 20
Aug 26 14:44:20 genipapo kernel: ACPI: (supports S0 S1 S4 S5)
Aug 26 14:44:20 genipapo kernel: md: Autodetecting RAID arrays.
Aug 26 14:44:20 genipapo kernel: md: autorun ...
Aug 26 14:44:20 genipapo kernel: md: ... autorun DONE.
Aug 26 14:44:20 genipapo kernel: EXT2-fs warning (device hda2): ext2_fill_super: mounting ext3 filesystem as ext2
Aug 26 14:44:20 genipapo kernel: 
Aug 26 14:44:20 genipapo kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 26 14:44:20 genipapo kernel: Freeing unused kernel memory: 272k freed
Aug 26 14:44:20 genipapo kernel: ACPI: Power Button (FF) [PWRF]
Aug 26 14:44:20 genipapo kernel: ACPI: Processor [CPU] (supports C1)
Aug 26 14:44:20 genipapo kernel: ACPI: Processor [CPU1] (supports C1)
Aug 26 14:44:20 genipapo kernel: usbcore: registered new driver usbfs
Aug 26 14:44:20 genipapo kernel: usbcore: registered new driver hub
Aug 26 14:44:20 genipapo kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email protected]
Aug 26 14:44:20 genipapo kernel: ide-floppy: hdd: I/O error, pc =  0, key =  2, asc = 3a, ascq =  0
Aug 26 14:44:20 genipapo kernel: ide-floppy: hdd: I/O error, pc = 1b, key =  2, asc = 3a, ascq =  0
Aug 26 14:44:20 genipapo kernel: hdd: No disk in drive
Aug 26 14:44:20 genipapo kernel: Adding 2097136k swap on /dev/hda3.  Priority:-1 extents:1
Aug 26 14:44:20 genipapo kernel: kjournald starting.  Commit interval 5 seconds
Aug 26 14:44:20 genipapo kernel: EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
Aug 26 14:44:20 genipapo kernel: EXT3 FS on hda1, internal journal
Aug 26 14:44:20 genipapo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 26 14:44:20 genipapo kernel: kjournald starting.  Commit interval 5 seconds
Aug 26 14:44:20 genipapo kernel: EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
Aug 26 14:44:20 genipapo kernel: EXT3 FS on hdb1, internal journal
Aug 26 14:44:20 genipapo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Aug 26 14:44:20 genipapo kernel: IA-32 Microcode Update Driver: v1.14 <[email protected]>
Aug 26 14:44:20 genipapo kernel: microcode: CPU0 updated from revision 0x0 to 0x1, date = 11022000 
Aug 26 14:44:20 genipapo kernel: microcode: CPU1 updated from revision 0x0 to 0x1, date = 11022000 
Aug 26 14:44:20 genipapo kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Aug 26 14:44:20 genipapo kernel: parport_pc: Via 686A parallel port: io=0x378
Aug 26 14:44:20 genipapo kernel: SCSI subsystem initialized
Aug 26 14:44:20 genipapo kernel: inserting floppy driver for 2.6.8.1
Aug 26 14:44:20 genipapo kernel: Floppy drive(s): fd0 is 1.44M
Aug 26 14:44:20 genipapo kernel: FDC 0 is a post-1991 82077
Aug 26 14:44:20 genipapo kernel: 8139too Fast Ethernet driver 0.9.27
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
Aug 26 14:44:20 genipapo kernel: eth0: RealTek RTL8139 at 0xe400, 00:00:1c:d9:a7:51, IRQ 11
Aug 26 14:44:20 genipapo kernel: via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
Aug 26 14:44:20 genipapo kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
Aug 26 14:44:20 genipapo kernel: eth1: VIA Rhine III at 0xdc00, 00:e0:7d:f7:d1:b1, IRQ 10.
Aug 26 14:44:20 genipapo kernel: eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Aug 26 14:44:20 genipapo kernel: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Aug 26 14:44:20 genipapo kernel: Uniform CD-ROM driver Revision: 3.20
Aug 26 14:44:20 genipapo kernel: ip_tables: (C) 2000-2002 Netfilter core team
Aug 26 14:44:20 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:44:20 genipapo irqbalance: irqbalance startup succeeded
Aug 26 14:44:21 genipapo rpcidmapd: rpc.idmapd startup succeeded
Aug 26 14:44:21 genipapo random: Initializing random number generator:  succeeded
Aug 26 14:44:17 genipapo sysctl: kernel.sysrq = 1 
Aug 26 14:44:17 genipapo network: Setting network parameters:  succeeded 
Aug 26 14:44:17 genipapo network: Bringing up loopback interface:  succeeded 
Aug 26 14:44:22 genipapo rc: Starting pcmcia:  succeeded
Aug 26 14:44:22 genipapo netfs: Mounting other filesystems:  succeeded
Aug 26 14:44:23 genipapo kernel: NET: Registered protocol family 10
Aug 26 14:44:23 genipapo kernel: IPv6 over IPv4 tunneling driver
Aug 26 14:44:23 genipapo sshd:  succeeded
Aug 26 14:44:23 genipapo xinetd: xinetd startup succeeded
Aug 26 14:44:23 genipapo xinetd[1112]: Server /usr/lib/ppr/lib/lprsrv is not executable [file=/etc/xinetd.d/ppr] [line=12]
Aug 26 14:44:23 genipapo xinetd[1112]: Error parsing attribute server - DISABLING SERVICE [file=/etc/xinetd.d/ppr] [line=12]
Aug 26 14:44:23 genipapo xinetd[1112]: bad service attribute: disabled [file=/etc/xinetd.d/ppr] [line=15]
Aug 26 14:44:23 genipapo xinetd[1112]: Unknown user: pprwww [file=/etc/xinetd.d/ppr] [line=24]
Aug 26 14:44:23 genipapo xinetd[1112]: Error parsing attribute user - DISABLING SERVICE [file=/etc/xinetd.d/ppr] [line=24]
Aug 26 14:44:23 genipapo xinetd[1112]: Server /usr/lib/ppr/lib/ppr-httpd is not executable [file=/etc/xinetd.d/ppr] [line=25]
Aug 26 14:44:23 genipapo xinetd[1112]: Error parsing attribute server - DISABLING SERVICE [file=/etc/xinetd.d/ppr] [line=25]
Aug 26 14:44:23 genipapo xinetd[1112]: bad service attribute: disabled [file=/etc/xinetd.d/ppr] [line=27]
Aug 26 14:44:24 genipapo xinetd[1112]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Aug 26 14:44:24 genipapo xinetd[1112]: Started working: 1 available service
Aug 26 14:44:29 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:44:29 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:44:41 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:44:41 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:44:53 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:44:53 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:45:03 genipapo ntpdate[1123]: can't find host clock.redhat.com 
Aug 26 14:45:03 genipapo ntpdate[1123]: no servers can be used, exiting
Aug 26 14:45:03 genipapo ntpd:  failed
Aug 26 14:45:03 genipapo ntpd[1127]: ntpd [email protected] Thu Mar 11 11:46:39 EST 2004 (1)
Aug 26 14:45:03 genipapo ntpd: ntpd startup succeeded
Aug 26 14:45:04 genipapo ntpd[1127]: precision = 1.000 usec
Aug 26 14:45:04 genipapo ntpd[1127]: kernel time sync status 0040
Aug 26 14:45:04 genipapo ntpd[1127]: frequency initialized 137.662 PPM from /var/lib/ntp/drift
Aug 26 14:45:04 genipapo ntpd[1127]: configure: keyword "authenticate" unknown, line ignored
Aug 26 14:45:05 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:45:05 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:45:17 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:45:17 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:45:29 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:45:29 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:45:41 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:45:41 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:45:53 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:45:53 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:46:05 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:46:05 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:46:17 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:46:17 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:46:29 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:46:29 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:46:41 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:46:41 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:46:53 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:46:53 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:47:05 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:47:05 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:47:17 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:47:17 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:47:29 genipapo kernel: NETDEV WATCHDOG: eth0: transmit timed out
Aug 26 14:47:29 genipapo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Aug 26 14:47:30 genipapo shutdown: shutting down for system reboot
Aug 26 14:47:30 genipapo init: Switching to runlevel: 6
Aug 26 14:47:31 genipapo sshd: sshd -TERM succeeded
Aug 26 14:47:31 genipapo xinetd[1112]: Exiting...
Aug 26 14:47:31 genipapo xinetd: xinetd shutdown succeeded
Aug 26 14:47:32 genipapo ntpd[1127]: ntpd exiting on signal 15
Aug 26 14:47:32 genipapo ntpd: ntpd shutdown succeeded
Aug 26 14:47:32 genipapo dd: 1+0 records in
Aug 26 14:47:32 genipapo dd: 1+0 records out
Aug 26 14:47:32 genipapo random: Saving random seed:  succeeded
Aug 26 14:47:32 genipapo kernel: Kernel logging (proc) stopped.
Aug 26 14:47:32 genipapo kernel: Kernel log daemon terminating.
Aug 26 14:47:33 genipapo syslog: klogd shutdown succeeded
Aug 26 14:47:33 genipapo exiting on signal 15