Skip to contentSkip to conversation

How to run 2.6.8.1 on Tiger 4

DISCUSSION [email protected] 3 participants 3 messages Sep 1, 2004

lore
Share & tools
lore
#0 lore raw

I can run 2.6.0 with ia64 ports on Tiger 4,
bun can not run 2.6.4 with ia64 ports on it ,
and can not run 2.6.8.1 on Tiger 4.

How to do?

__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail

#1 lore raw
Quoted 5 lines · On Tuesday, August 31, 2004 7:04 pm, [email protected] wrote:

I can run 2.6.0 with ia64 ports on Tiger 4,
bun can not run 2.6.4 with ia64 ports on it ,
and can not run 2.6.8.1 on Tiger 4.

How to do?

You could buy an Altix, which works fine. :) Or you could try to configure a kernel with arch/ia64/configs/generic_defconfig, e.g.:

  # tar zxf linux-2.6.8.1.tar.gz
  # cd linux-2.6.8.1
  # make generic_defconfig
  # make compressed
  # cp vmlinux.gz /boot/efi
  <boot it>

If that doesn't work, please describe what happens in more detail.

Jesse

#2 lore raw
In reply to [email protected]
Quoted 6 lines · On Tue, 2004-08-31 at 19:04 -0700, wrote:

I can run 2.6.0 with ia64 ports on Tiger 4,
bun can not run 2.6.4 with ia64 ports on it ,
and can not run 2.6.8.1 on Tiger 4.

How to do?

Stock 2.6.8.1 should work just fine.

# cp arch/ia64/configs/generic_defconfig .config
# make oldconfig
# make compressed

If that's not bootable post specific detail about how it fails (preferably console log) to the linux-ia64 list. Thanks,

Alex