CPU Context corruption
What does this error mean?
CPU 0: Machine Check Exception: 0000000000000004
Bank 0: 820000001040080F
I have a Matsonic 9097c motherboard, 2.4Ghz prescott celeron cpu. This error seems to be random. We have replaced the motherboard & cpu to no avail.
-Nigel
Quoted 10 lines · Nigel Kukard
What does this error mean?
CPU 0: Machine Check Exception: 0000000000000004
Bank 0: 820000001040080FI have a Matsonic 9097c motherboard, 2.4Ghz prescott celeron cpu. This error seems to be random. We have replaced the motherboard & cpu to no avail.
It normally indicates a hardware problem. The precise meaning of all the bits is in the Intel chip docs (volume 3). If you've swapped the mainboard/cpu it might just be bad RAM.
Quoted 8 lines · Alan Cox
Quoted 7 lines · Nigel Kukard
What does this error mean?
CPU 0: Machine Check Exception: 0000000000000004
Bank 0: 820000001040080F
Quoted 7 lines
Quoted 3 lines
I have a Matsonic 9097c motherboard, 2.4Ghz prescott celeron cpu. This error seems to be random. We have replaced the motherboard & cpu to no avail.
It normally indicates a hardware problem. The precise meaning of all the bits is in the Intel chip docs (volume 3). If you've swapped the mainboard/cpu it might just be bad RAM.
He can also get precise info with Dave Jones' parsemce tool :
http://www.kernel.org/pub/linux/kernel/people/davej/tools/
It currently says :
Status: (4) Machine Check in progress.
Restart IP invalid.
parsebank(0): 820000001040080f @ 0
External tag parity error
CPU state corrupt. Restart not possible Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Since it says it's neither memory nor I/O, I think it might be related to a PCI parity error with some card, either during transfers or config access.
Regards,
Willy
Quoted 11 lines
Quoted 6 lines
Quoted 2 lines
CPU 0: Machine Check Exception: 0000000000000004
Bank 0: 820000001040080FIt normally indicates a hardware problem. The precise meaning of all the bits is in the Intel chip docs (volume 3). If you've swapped the mainboard/cpu it might just be bad RAM.
He can also get precise info with Dave Jones' parsemce tool :
yep, i found this a few hours ago... and got the same result as below
Quoted 14 lines
It currently says :
Status: (4) Machine Check in progress.
Restart IP invalid.
parsebank(0):820000001040080f@ 0
External tag parity error
CPU state corrupt. Restart not possible Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Quoted 3 lines
Since it says it's neither memory nor I/O, I think it might be related to a PCI parity error with some card, either during transfers or config access.
Thats the interesting part, I have 2 cards plugged in... 1 x SIS6326 AGP graphics card, and 1 x Connexant PCI modem card.
If I put the modem card into the left most pci slot, I get a bios IRQ routing error.
I've replaced the AGP card with another make, same problem, I've had my supplier replace the motherboard, same problem. Replaced the CPU, same problem.
I'm going to take the system back to the supplier tomorrow and ask him to sort it out.... I'm not going to tell him anything apart from "It does not work", its useless explaining to him the above if he not going to understand a word of it.
Could this be an incompatibility issue between the CPU and the mobo?
Regards
Nigel
Signature · 8 lines
Nigel Kukard, PhD CompSc (Chief Executive Officer) Linux Based Systems Design (Non-Profit) Web: www.lbsd.net Email: [email protected] Tel: (+27) 023 349 8000 Cell: (+27) 082 333 3723 Fax: (+27) 023 349 1395 Support: 086 747 7600 Address: LIGT House, 2 Klipdrift Rd, Rawsonville Linux Systems Design & Technology Solutions