: Suspend2 Merge: Device driver fixes 2/2
PATCH 1/1 : Suspend2 Merge: Device driver fixes 2/2
-----Forwarded Message-----
Quoted 19 lines
From: Bernard Blackham <[email protected]>
To: Michael Frank <[email protected]>
Cc: [email protected]
Subject: Re: [SoftwareSuspend-devel] ALSA ali5451 and sis PM fundamentally broken?
Date: Sun, 08 Aug 2004 22:33:54 +0800Quoted 4 lines · Michael Frank
Built the current Gentoo ALSA package 1.05a on 2.4.24.
On ali5451 it is difficult to get the driver to work at all - takes several loads. Does not survive suspend.
With the latest 2.6.7 and swsusp 2.0.0.103, my sound card's (ali5451) suspend/resume began eratticaly failing again. So I started tinkering some more, and I've come up with this patch (in addition to the one liner already in 2.0.0.103-for-2.6.7) that makes sound reliably suspend and resume every time *and* playback is not interrupted! :)
Quoted 6 lines
The line "
snd_pcm_suspend_all(chip->pcm)" was the culprit for stopping playback and requiring it to be restarted. It seems common to some other alsa drivers too, so removing it may help with similar problems experienced by others.Bernard.
sound/core/init.c +2 -2
@@ -790,7 +790,7 @@if (card->power_state == SNDRV_CTL_POWER_D3hot)return 0 ;/* FIXME: correct state value? */ -return card->pm_suspend (card,0 ); +return card->pm_suspend (card, SNDRV_CTL_POWER_D3hot); }int snd_card_pci_resume (struct pci_dev *dev)
@@ -801,7 +801,7 @@if (card->power_state ==SNDRV_CTL_POWER_D0 )return 0 ;/* FIXME: correct state value? */ - return card->pm_resume(card, 0); + return card->pm_resume(card, SNDRV_CTL_POWER_D0); }#endif
sound/pci/ali5451/ali5451.c +3 -1
@@ -286,6 +286,7 @@static void snd_ali_clear_voices (ali_t *,unsigned int ,unsigned int );static unsigned short snd_ali_codec_peek (ali_t *,int ,unsigned short );static void snd_ali_codec_poke (ali_t *,int ,unsigned short ,unsigned short ); +static int snd_ali_chip_init (ali_t *codec);/* * Debug Part
@@ -1915,7 +1916,6 @@if (! im)return 0 ; -snd_pcm_suspend_all (chip->pcm);snd_ac97_suspend (chip->ac97);spin_lock_irq (&chip->reg_lock);
@@ -1957,6 +1957,7 @@return 0 ;pci_enable_device (chip->pci); +snd_ali_chip_init (chip);spin_lock_irq (&chip->reg_lock);
@@ -1981,6 +1982,7 @@snd_ac97_resume (chip->ac97); +snd_power_change_state (card, state); return 0; }#endif /* CONFIG_PM */
Signature · 7 lines
Nigel Cunningham Pastoral Worker Christian Reformed Church of Tuggeranong PO Box 1004, Tuggeranong, ACT 2901 Many today claim to be tolerant. True tolerance, however, can cope with others being intolerant.
At Thu, 16 Sep 2004 20:45:36 +1000,
Quoted 25 lines · Nigel Cunningham
-----Forwarded Message-----
Quoted 23 lines
From: Bernard Blackham <[email protected]>
To: Michael Frank <[email protected]>
Cc: [email protected]
Subject: Re: [SoftwareSuspend-devel] ALSA ali5451 and sis PM fundamentally broken?
Date: Sun, 08 Aug 2004 22:33:54 +0800Quoted 4 lines · Michael Frank
Built the current Gentoo ALSA package 1.05a on 2.4.24.
On ali5451 it is difficult to get the driver to work at all - takes several loads. Does not survive suspend.
With the latest 2.6.7 and swsusp 2.0.0.103, my sound card's (ali5451) suspend/resume began eratticaly failing again. So I started tinkering some more, and I've come up with this patch (in addition to the one liner already in 2.0.0.103-for-2.6.7) that makes sound reliably suspend and resume every time *and* playback is not interrupted! :)
The line "
snd_pcm_suspend_all(chip->pcm)" was the culprit for stopping playback and requiring it to be restarted. It seems common to some other alsa drivers too, so removing it may help with similar problems experienced by others.
No, snd_pcm_suspend_all() must be called. All PCM streams are supposed to be moved to SUSPENDED state when the suspend happens. Keeping other states don't guaratee the proper resume process.
The problem of ali5451 driver was that it forgot to call snd_power_change_state() at the end of suspend callback. This was already fixed.
So, don't apply this patch, please.
Takashi
-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
[Mistakenly posted to alsa-devel, now resent to the correct addreses]
At Thu, 16 Sep 2004 20:45:36 +1000,
Quoted 25 lines · Nigel Cunningham
-----Forwarded Message-----
Quoted 23 lines
From: Bernard Blackham <[email protected]>
To: Michael Frank <[email protected]>
Cc: [email protected]
Subject: Re: [SoftwareSuspend-devel] ALSA ali5451 and sis PM fundamentally broken?
Date: Sun, 08 Aug 2004 22:33:54 +0800Quoted 4 lines · Michael Frank
Built the current Gentoo ALSA package 1.05a on 2.4.24.
On ali5451 it is difficult to get the driver to work at all - takes several loads. Does not survive suspend.
With the latest 2.6.7 and swsusp 2.0.0.103, my sound card's (ali5451) suspend/resume began eratticaly failing again. So I started tinkering some more, and I've come up with this patch (in addition to the one liner already in 2.0.0.103-for-2.6.7) that makes sound reliably suspend and resume every time *and* playback is not interrupted! :)
The line "
snd_pcm_suspend_all(chip->pcm)" was the culprit for stopping playback and requiring it to be restarted. It seems common to some other alsa drivers too, so removing it may help with similar problems experienced by others.
No, snd_pcm_suspend_all() must be called. All PCM streams are supposed to be moved to SUSPENDED state when the suspend happens. Keeping other states doesn't guaratee the proper resume process.
The problem of ali5451 driver was that it forgot to call snd_power_change_state() at the end of suspend callback. This was already fixed.
So, don't apply this patch, please.
Takashi
Hi.
Quoted 7 lines · Takashi Iwai
No,
snd_pcm_suspend_all()must be called. All PCM streams are supposed to be moved to SUSPENDED state when the suspend happens. Keeping other states doesn't guaratee the proper resume process.The problem of ali5451 driver was that it forgot to call
snd_power_change_state()at the end of suspend callback. This was already fixed.
Is it merged to Andy or Linus yet? If so, I could drop the patch.
Regards,
Nigel
Signature · 7 lines
Nigel Cunningham Pastoral Worker Christian Reformed Church of Tuggeranong PO Box 1004, Tuggeranong, ACT 2901 Many today claim to be tolerant. True tolerance, however, can cope with others being intolerant.
At Fri, 17 Sep 2004 08:08:16 +1000,
Quoted 8 lines · Nigel Cunningham
Hi.
Quoted 4 lines · Takashi Iwai
No,
snd_pcm_suspend_all()must be called. All PCM streams are supposed to be moved to SUSPENDED state when the suspend happens. Keeping other states doesn't guaratee the proper resume process.
Quoted 5 lines
Quoted 3 lines
The problem of ali5451 driver was that it forgot to call
snd_power_change_state()at the end of suspend callback. This was already fixed.Is it merged to Andy or Linus yet?
Yes, it's already in 2.6.9-rc2 (at least).
If the resume problem still persists, the culprit must be somewhere else...
Takashi