Skip to contentSkip to conversation

2.6.9-rc2-mm1 usb breakage

DISCUSSION Paul Giordano 1 participant 1 message Sep 21, 2004

lore
Share & tools
lore
#0 lore raw

Booting a TYAN S2462 motheboard with 2.6.9-rc2-mm1:

09:00:17 CDT pgiorda [debug] ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
09:00:17 CDT pgiorda [info] ACPI: PCI interrupt 0000:00:07.4[D] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI interrupt 0000:00:07.4[D] -> GSI 19 (level, low) -> IRQ 19
09:00:17 CDT pgiorda [info] ohci_hcd 0000:00:07.4: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB ohci_hcd 0000:00:07.4: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB
09:00:17 CDT pgiorda [info] ohci_hcd 0000:00:07.4: irq 19, pci mem 0xdc000 ohci_hcd 0000:00:07.4: irq 19, pci mem 0xdc000 09:00:17 CDT pgiorda [info] ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
09:00:17 CDT pgiorda [err] ohci_hcd 0000:00:07.4: init err (00002edf 2a2f) ohci_hcd 0000:00:07.4: init err (00002edf 2a2f) 09:00:17 CDT pgiorda [err] ohci_hcd 0000:00:07.4: can't start ohci_hcd 0000:00:07.4: can't start
09:00:17 CDT pgiorda [err] ohci_hcd 0000:00:07.4: init error -75 ohci_hcd 0000:00:07.4: init error -75
09:00:17 CDT pgiorda [info] ohci_hcd 0000:00:07.4: remove, state 0 ohci_hcd 0000:00:07.4: remove, state 0
09:00:17 CDT pgiorda [info] ohci_hcd 0000:00:07.4: USB bus 1 deregistered ohci_hcd 0000:00:07.4: USB bus 1 deregistered 09:00:17 CDT pgiorda [warning] ohci_hcd: probe of 0000:00:07.4 failed with error -75 ohci_hcd: probe of 0000:00:07.4 failed with error -75

No USB after that.

Please cc me, I'm not on the list.

Thanks,
Gio