PS2 mouse/kbd problems
Hi all...
I got time to track my ps2 problems. I run 2.6.9-rc2-mm[123] (that was enough).
Results:
- mm1: mouse and kbd work ok, both in console and X
- mm2: mouse works, no kbd. I had to unplug/plug the keyboard to get it responding.
- mm3: kbd ok, but ps2 mouse is sluggish.
In latest -rc3-mm2, behavior is like mm3 and above.
If you need more info, I have dmesg's, or still can boot on those kernels. Perhaps this gives some clue. I will scan the changelog for -mm3.
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.1 (Community) for i586
Linux 2.6.9-rc3-mm2 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #1
Quoted 5 lines · J.A. Magallon
Hi all...
I got time to track my ps2 problems. I run 2.6.9-rc2-mm[123] (that was enough).
Quoted 8 lines
Results:
- mm1: mouse and kbd work ok, both in console and X
- mm2: mouse works, no kbd. I had to unplug/plug the keyboard to get it responding.
- mm3: kbd ok, but ps2 mouse is sluggish.In latest -rc3-mm2, behavior is like mm3 and above.
What about vanilla -rc3 and vanilla -rc3 with bk-input patch applied (if you have some time of course). Do they exibit the same symptoms as -mm tree?
Signature · 1 line
Dmitry
Re: PS2 mouse/kbd problems (gremlins?)
Quoted 12 lines · Dmitry Torokhov
Quoted 11 lines · J.A. Magallon
Hi all...
I got time to track my ps2 problems. I run 2.6.9-rc2-mm[123] (that was enough).
Results:
- mm1: mouse and kbd work ok, both in console and X
- mm2: mouse works, no kbd. I had to unplug/plug the keyboard to get it responding.
- mm3: kbd ok, but ps2 mouse is sluggish.
Quoted 6 lines
Quoted 2 lines
In latest -rc3-mm2, behavior is like mm3 and above.
What about vanilla -rc3 and vanilla -rc3 with bk-input patch applied (if you have some time of course). Do they exibit the same symptoms as -mm tree?
Both rc3 and rc3-bk.input work. Even rc3-mm2 works, depending on how I boot ;). This is getting really strange....look:
ll /boot:
lrwxrwxrwx 1 root root 21 2004.10.05 14:16 vmlinuz -> vmlinuz-2.6.9-rc3-mm2 -rw-r--r-- 1 root root 1485335 2004.09.16 23:28 vmlinuz-2.6.9-rc2-mm1 -rw-r--r-- 1 root root 1500553 2004.09.23 22:50 vmlinuz-2.6.9-rc2-mm2 -rw-r--r-- 1 root root 1501867 2004.09.24 16:20 vmlinuz-2.6.9-rc2-mm3 -rw-r--r-- 1 root root 1498557 2004.10.01 01:05 vmlinuz-2.6.9-rc2-mm4 -rw-r--r-- 1 root root 1448740 2004.10.06 22:49 vmlinuz-2.6.9-rc3 -rw-r--r-- 1 root root 1451900 2004.10.06 23:57 vmlinuz-2.6.9-rc3-bk.input -rw-r--r-- 1 root root 1506097 2004.10.04 00:32 vmlinuz-2.6.9-rc3-mm1 -rw-r--r-- 1 root root 1505218 2004.10.05 20:12 vmlinuz-2.6.9-rc3-mm2
lilo.conf:
root=/dev/sda1
read-only
default="linux"
append="psmouse.proto=exps"
image=/boot/vmlinuz
label="linux"
...
image=/boot/vmlinuz-2.6.9-rc3-mm2
label="linux-2.6.9-rc3-mm2"
If I boot with the default entry, mouse does not work. If I boot with the specific entry in lilo for rc3-mm2, it works.
dmesg diff:
dm-2 renamed from dm-1 +0 -0
@@ -45,10 +45,10 @@
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
-Kernel command line: BOOT_IMAGE=linux ro root=801 psmouse.proto=exps 3 +Kernel command line: BOOT_IMAGE=linux-2.6.9-rc3-mm2 ro root=801 psmouse.proto=exps 3 CPU 0 irqstacks, hard=b03d2000 soft=b03ce000
PID hash table entries: 4096 (order: 12, 65536 bytes)
-Detected 2405.595 MHz processor.
+Detected 2405.625 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x60
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
@@ -225,17 +225,17 @@
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
- pIII_sse : 3072.000 MB/sec
-raid5: using function: pIII_sse (3072.000 MB/sec)
+ pIII_sse : 3044.000 MB/sec
+raid5: using function: pIII_sse (3044.000 MB/sec)
raid6: int32x1 664 MB/s
raid6: int32x2 882 MB/s
-raid6: int32x4 613 MB/s
+raid6: int32x4 617 MB/s
raid6: int32x8 464 MB/s
raid6: mmxx1 1949 MB/s
-raid6: mmxx2 2441 MB/s -raid6: sse1x1 1164 MB/s +raid6: mmxx2 2437 MB/s +raid6: sse1x1 1160 MB/s
raid6: sse1x2 2386 MB/s
-raid6: sse2x1 2605 MB/s
+raid6: sse2x1 2601 MB/s
raid6: sse2x2 2707 MB/s
raid6: using algorithm sse2x2 (2707 MB/s)
md: raid6 personality registered as nr 8
@@ -296,14 +296,14 @@
usb 2-1: new full speed USB device using address 2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected+drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3404 +usbcore: registered new driver usblp+drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.-drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3404 -usbcore: registered new driver usblp-drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on sda1, internal journal
Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
@@ -357,5 +357,5 @@
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
-intel8x0_measure_ac97_clock: measured 49595 usecs
+intel8x0_measure_ac97_clock: measured 50582 usecs
intel8x0: clocking to 48000
(NOTE: look at the diff in usblp position....)
Somebody understands this ? Are there gremlins in my box ?
Why the init order of usblp is dependent on lilo entry ? It does not depend even on different builds, as if some link order was broken, it is the same kernel image accessed with a different name...
???
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.1 (Community) for i586
Linux 2.6.9-rc3-mm2 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #2
Re: PS2 mouse/kbd problems (gremlins?)
Quoted 45 lines · J.A. Magallon
Quoted 12 lines · Dmitry Torokhov
Quoted 11 lines · J.A. Magallon
Hi all...
I got time to track my ps2 problems. I run 2.6.9-rc2-mm[123] (that was enough).
Results:
- mm1: mouse and kbd work ok, both in console and X
- mm2: mouse works, no kbd. I had to unplug/plug the keyboard to get it responding.
- mm3: kbd ok, but ps2 mouse is sluggish.Quoted 7 lines
Quoted 2 lines
In latest -rc3-mm2, behavior is like mm3 and above.
What about vanilla -rc3 and vanilla -rc3 with bk-input patch applied (if you
have some time of course). Do they exibit the same symptoms as -mm tree?Both rc3 and rc3-bk.input work. Even rc3-mm2 works, depending on how I boot ;).
This is getting really strange....look:lrwxrwxrwx 1 root root 21 2004.10.05 14:16 vmlinuz ->
vmlinuz-2.6.9-rc3-mm2lilo.conf:
default="linux"
append="psmouse.proto=exps"
image=/boot/vmlinuz
label="linux"
...
image=/boot/vmlinuz-2.6.9-rc3-mm2
label="linux-2.6.9-rc3-mm2"If I boot with the default entry, mouse does not work. If I boot with the specific entry in lilo for rc3-mm2, it works.
dmesg diff:
(quoted diff) +1
-1-Kernel command line: BOOT_IMAGE=linux ro root=801 psmouse.proto=exps 3 +Kernel command line: BOOT_IMAGE=linux-2.6.9-rc3-mm2 ro root=801
Quoted 1 line
Somebody understands this ? Are there gremlins in my box ?
A week or so ago I had a problem and couldnt see which changeset caused it. After a binary search it turned out to be the changeset that changed the (length of the) kernel version string. A wild pointer was harmless at first, but after shifting everything by a few bytes it caused crashes.
Probably (hopefully) your problem is something entirely different, but it is not impossible that kernel behaviour depends on kernel name.
Re: PS2 mouse/kbd problems (gremlins?)
Quoted 51 lines · Andries Brouwer
Quoted 42 lines · J.A. Magallon
Quoted 12 lines · Dmitry Torokhov
Quoted 11 lines · J.A. Magallon
Hi all...
I got time to track my ps2 problems. I run 2.6.9-rc2-mm[123] (that was enough).
Results:
- mm1: mouse and kbd work ok, both in console and X
- mm2: mouse works, no kbd. I had to unplug/plug the keyboard to get it responding.
- mm3: kbd ok, but ps2 mouse is sluggish.Quoted 6 lines
Quoted 2 lines
In latest -rc3-mm2, behavior is like mm3 and above.
What about vanilla -rc3 and vanilla -rc3 with bk-input patch applied (if you have some time of course). Do they exibit the same symptoms as -mm tree?
Both rc3 and rc3-bk.input work. Even rc3-mm2 works, depending on how I boot ;). This is getting really strange....look:
lrwxrwxrwx 1 root root 21 2004.10.05 14:16 vmlinuz -> vmlinuz-2.6.9-rc3-mm2
lilo.conf:
default="linux"
append="psmouse.proto=exps"
image=/boot/vmlinuz
label="linux"
...
image=/boot/vmlinuz-2.6.9-rc3-mm2
label="linux-2.6.9-rc3-mm2"If I boot with the default entry, mouse does not work. If I boot with the specific entry in lilo for rc3-mm2, it works.
dmesg diff:
(quoted diff) +1
-1-Kernel command line: BOOT_IMAGE=linux ro root=801 psmouse.proto=exps 3 +Kernel command line: BOOT_IMAGE=linux-2.6.9-rc3-mm2 ro root=801Quoted 1 line
Somebody understands this ? Are there gremlins in my box ?
A week or so ago I had a problem and couldnt see which changeset caused it. After a binary search it turned out to be the changeset that changed the (length of the) kernel version string. A wild pointer was harmless at first, but after shifting everything by a few bytes it caused crashes.
Quoted 2 lines
Probably (hopefully) your problem is something entirely different, but it is not impossible that kernel behaviour depends on kernel name.
Well, partially solved...
I had USB legacy emulation active in the BIOS. Disabling it makes everything work as it should.
I had alwasy thought that Linux ignored the BIOS completely, as an ancient remain of cr*p.
Thanks everyoune.
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.1 (Community) for i586
Linux 2.6.9-rc3-mm3 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #1