bandwidth limitation per dynamic IP
Hi,
Is there a way to do the following with lartc tools :
I would like to limit any entering user to not use more than Xkb/mb to my website. The IPs they use are changing all the time so static IP limitation cannot be used. Is there a way doing so ?
EC.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · EC
Hi,
Is there a way to do the following with lartc tools :
I would like to limit any entering user to not use more than Xkb/mb to my website. The IPs they use are changing all the time so static IP limitation cannot be used. Is there a way doing so ?
You Say "any entering users"
If that case, then make a _general_ rule to throttle traffic from to/from port 80
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · EC
Quoted 9 lines · EC
Quoted 5 lines
Hi,
Is there a way to do the following with lartc tools :
I would like to limit any entering user to not use more than Xkb/mb to my website. The IPs they use are changing all the time so static IPlimitation
Quoted 1 line
cannot be used. Is there a way doing so ?
Quoted 8 lines
Quoted 4 lines
You Say "any entering users"
If that case, then make a _general_ rule to throttle traffic from to/from port 80
No.
There is a general bandwidth limitation for port 80. What I need is limiting each user to never use more than Xkb EVEN if there is some bandwidth left free.
Wow.. You want to limit based on _per_ user? I'm not sure how that can be achieved.
What I can think of is to have some sort of logwatcher (syslog-ng) coupled with swatch (?) and using it to feed into a program that can dynamically add the IP address into the IPtables FW mark.
But seriously, What you're trying to do, to me, doesn't make much sense.
If user A comes to your site, you give A 10kb/s (out of 50kb/s) If user B comes then, another 10kb/s is given.
If you have 5 users concurrently then all the 50kb/s is used up.
What happens when user #6 comes in then? U pump out 50kb/s? No such thing right?
I think the general rule of _how_ much you want to feed out is more applicable for your needs. (correct me if I'm wrong of more info please).
Say.. If you limit 50Kb/s for _all_ users, then it will be equally shared between _all_ users.
Signature · 7 lines
Ow Mun Heng Fedora GNU/Linux Core 2 on D600 1.4Ghz CPU kernel 2.6.7-2.jul1-interactive Neuromancer 09:40:50 up 34 min, 9 users, load average: 0.85, 1.19, 1.18 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/