iommu: Domain allocation enhancements
Subsystems (4)
Vasant Hegde
maintainerv4 cover iommu: Domain allocation enhancements
This series adds iommu_paging_domain_alloc_flags() which takes flags to pass additional details for domain allocation (like domain with PASID support). Also adjusts core code to handler variuos domain allocations.
Also updates AMD IOMMU driver domain allocation code. With this by default it will allocate domain with V2 page table for PASID capable device and v1 page table for rest of the devices.
Thanks everyone who reviewed previous version and provided valuable feedbacks.
This series is based on top of v6.12-rc3.
This is also available at github :
https://github.com/AMDESE/linux-iommu/tree/iommu_paging_domain_v4
Changes from v3 -> v4:
- Added Review-by tags
- Updated Patch3 to handle -EOPNOTSUPP and allocate non-PASID domain
- Updated amd_iommu_domain_alloc_user() to do flags check first
- Few other minor fixes based on review comment
V3 : https://lore.kernel.org/linux-iommu/[email protected]/T/#t
Changes from V2 -> v3:
- Added Review-by tags
- Fixed warnings reported by 0-DAY CI
- Added patch to enhance arm_smmu_domain_alloc_user() to support IOMMU_HWPT_ALLOC_PASID flag
- Added new patch to check GIOSUP/GTSUP
- Added patch to move V2 page table check to early_amd_iommu_init()
- Added patch to adjust blocked/identity domain allocation in core layer
- Dropped "iommu/amd: Add iommu_ops->domain_alloc_paging support"
V2 : https://lore.kernel.org/linux-iommu/[email protected]/T/#t
Changes from v1 -> v2:
- Rebased on top of iommu/next
- Split patches into smaller patches
- Added global static identity domain support
V1 : https://lore.kernel.org/linux-iommu/[email protected]/
RFC v2: https://lore.kernel.org/linux-iommu/[email protected]/T/#t
RFC v1 : https://lore.kernel.org/linux-iommu/[email protected]/
Jason Gunthorpe (5):
iommu: Refactor __iommu_domain_alloc()
iommu: Introduce iommu_paging_domain_alloc_flags()
iommu: Add new flag to explictly request PASID capable domain
iommu: Put domain allocation in __iommu_group_alloc_blocking_domain()
iommu: Create __iommu_alloc_identity_domain()
Vasant Hegde (7):
iommu/arm-smmu-v3: Enhance domain_alloc_user() to allocate PASID
capable domain
iommu/amd: Add helper function to check GIOSUP/GTSUP iommu/amd: Move V2 page table support check to early_amd_iommu_init() iommu/amd: Separate page table setup from domain allocation iommu/amd: Pass page table type as param to pdom_setup_pgtable() iommu/amd: Enhance amd_iommu_domain_alloc_user() iommu/amd: Implement global identity domain
drivers/iommu/amd/amd_iommu.h | 8 +- drivers/iommu/amd/init.c | 18 +- drivers/iommu/amd/iommu.c | 129 +++++++++----- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 6 +- drivers/iommu/iommu.c | 186 ++++++++++++++------ include/linux/iommu.h | 14 +- include/uapi/linux/iommufd.h | 8 + 7 files changed, 261 insertions(+), 108 deletions(-)
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 1/12 iommu: Refactor __iommu_domain_alloc()
From: Jason Gunthorpe <[email protected]>
Following patch will introduce iommu_paging_domain_alloc_flags() API. Hence move domain init code to separate function so that it can be reused.
Also move iommu_get_dma_cookie() setup iommu_setup_default_domain() as it is required in DMA API mode only.
--- drivers/iommu/iommu.c | 46 +++++++++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 21 deletions(-)
drivers/iommu/iommu.c +25 -21
@@ -1934,6 +1934,22 @@ void iommu_set_fault_handler(struct iommu_domain *domain, }EXPORT_SYMBOL_GPL (iommu_set_fault_handler); +static void iommu_domain_init (struct iommu_domain *domain,unsigned int type, +const struct iommu_ops *ops) +{ + domain->type = type; + domain->owner = ops; +if (!domain->ops) + domain->ops = ops->default_domain_ops; + +/* +* If not already set, assume all sizes by default; the driver +* may override this later +*/ +if (!domain->pgsize_bitmap) + domain->pgsize_bitmap = ops->pgsize_bitmap; +} +static struct iommu_domain *__iommu_domain_alloc (const struct iommu_ops *ops,struct device *dev,unsigned int type)
@@ -1962,27 +1978,7 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops,if (!domain)return ERR_PTR (-ENOMEM ); - domain->type = type; - domain->owner = ops; -/* -* If not already set, assume all sizes by default; the driver -* may override this later -*/ -if (!domain->pgsize_bitmap) - domain->pgsize_bitmap = ops->pgsize_bitmap; - -if (!domain->ops) - domain->ops = ops->default_domain_ops; - -if (iommu_is_dma_domain (domain)) { -int rc; - - rc =iommu_get_dma_cookie (domain); -if (rc) { -iommu_domain_free (domain); -return ERR_PTR (rc); - } - } +iommu_domain_init (domain, type, ops);return domain; }
@@ -2965,6 +2961,14 @@ static int iommu_setup_default_domain(struct iommu_group *group,if (group->default_domain == dom)return 0 ; +if (iommu_is_dma_domain (dom)) { + ret =iommu_get_dma_cookie (dom); +if (ret) { +iommu_domain_free (dom); +return ret; + } + } +/* * IOMMU_RESV_DIRECT and IOMMU_RESV_DIRECT_RELAXABLE regions must be * mapped before their device is attached, in order to guarantee
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 2/12 iommu: Introduce iommu_paging_domain_alloc_flags()
In reply to Vasant HegdeFrom: Jason Gunthorpe <[email protected]>
Currently drivers calls iommu_paging_domain_alloc(dev) to get an UNMANAGED domain. This is not sufficient to support PASID with UNMANAGED domain as some HW like AMD requires certain page table type to support PASIDs.
Also the domain_alloc_paging op only passes device as param for domain allocation. This is not sufficient for AMD driver to decide the right page table.
Instead of extending ops->domain_alloc_paging() it was decided to enhance ops->domain_alloc_user() so that caller can pass various additional flags.
Hence add iommu_paging_domain_alloc_flags() API which takes flags as parameter. Caller can pass additional parameter to indicate type of domain required, etc. iommu_paging_domain_alloc_flags() internally calls appropriate callback function to allocate a domain.
--- drivers/iommu/iommu.c | 32 +++++++++++++++++++++++++++----- include/linux/iommu.h | 14 +++++++++++--- 2 files changed, 38 insertions(+), 8 deletions(-)
drivers/iommu/iommu.c +27 -5
@@ -2027,20 +2027,42 @@ struct iommu_domain *iommu_domain_alloc(const struct bus_type *bus)EXPORT_SYMBOL_GPL (iommu_domain_alloc);/** -* iommu_paging_domain_alloc() - Allocate a paging domain +* iommu_paging_domain_alloc_flags() - Allocate a paging domain * @dev: device for which the domain is allocated +* @flags: Enum of iommufd_hwpt_alloc_flags * * Allocate a paging domain which will be managed by a kernel driver. Return -* allocated domain if successful, or a ERR pointer for failure. +* allocated domain if successful, or an ERR pointer for failure. */ -struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int flags) { +const struct iommu_ops *ops; +struct iommu_domain *domain; +if (!dev_has_iommu (dev))return ERR_PTR (-ENODEV ); -return __iommu_domain_alloc (dev_iommu_ops (dev), dev,IOMMU_DOMAIN_UNMANAGED ); + ops =dev_iommu_ops (dev); + +if (ops->domain_alloc_paging && !flags) + domain = ops->domain_alloc_paging (dev); +else if (ops->domain_alloc_user) + domain = ops->domain_alloc_user (dev, flags,NULL ,NULL ); +else if (ops->domain_alloc && !flags) + domain = ops->domain_alloc (IOMMU_DOMAIN_UNMANAGED ); +else +return ERR_PTR (-EOPNOTSUPP ); + +if (IS_ERR (domain)) +return domain; +if (!domain) +return ERR_PTR (-ENOMEM ); + +iommu_domain_init (domain,IOMMU_DOMAIN_UNMANAGED , ops); +return domain; } -EXPORT_SYMBOL_GPL (iommu_paging_domain_alloc); +EXPORT_SYMBOL_GPL (iommu_paging_domain_alloc_flags);void iommu_domain_free (struct iommu_domain *domain) {
include/linux/iommu.h +11 -3
@@ -511,8 +511,6 @@ static inline int __iommu_copy_struct_from_user_array(* the caller iommu_domain_alloc() returns. * @domain_alloc_user: Allocate an iommu domain corresponding to the input * parameters as defined in include/uapi/linux/iommufd.h. -* Unlike @domain_alloc, it is called only by IOMMUFD and -* must fully initialize the new domain before return. * Upon success, if the @user_data is valid and the @parent * points to a kernel-managed domain, the new domain must be * IOMMU_DOMAIN_NESTED type; otherwise, the @parent must be
@@ -789,7 +787,11 @@ extern bool iommu_present(const struct bus_type *bus);extern bool device_iommu_capable (struct device *dev,enum iommu_cap cap);extern bool iommu_group_has_isolated_msi (struct iommu_group *group);extern struct iommu_domain *iommu_domain_alloc (const struct bus_type *bus); -struct iommu_domain *iommu_paging_domain_alloc (struct device *dev); +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev,unsigned int flags); +static inline struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) +{ +return iommu_paging_domain_alloc_flags (dev,0 ); +}extern void iommu_domain_free (struct iommu_domain *domain);extern int iommu_attach_device (struct iommu_domain *domain,struct device *dev);
@@ -1096,6 +1098,12 @@ static inline struct iommu_domain *iommu_domain_alloc(const struct bus_type *busreturn NULL ; } +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int flags) +{ +return ERR_PTR (-ENODEV ); +} +static inline struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) {return ERR_PTR (-ENODEV );
Signature · 1 line
2.31.1
Robin Murphy
reviewerRe: [PATCH v4 02/12] iommu: Introduce iommu_paging_domain_alloc_flags()
Quoted 7 lines · Vasant Hegde
From: Jason Gunthorpe <[email protected]>
Currently drivers calls
iommu_paging_domain_alloc(dev)to get an UNMANAGED domain. This is not sufficient to support PASID with UNMANAGED domain as some HW like AMD requires certain page table type to support PASIDs.
Quoted 7 lines
Also the
domain_alloc_pagingop only passes device as param for domain allocation. This is not sufficient for AMD driver to decide the right page table.Instead of extending
ops->domain_alloc_paging()it was decided to enhanceops->domain_alloc_user()so that caller can pass various additional flags.
Wait, what? So iommu_paging_domain_alloc_flags() opaquely may or may not actually allocate a regular paging domain or a user domain depending on the flags? But then per patch #3 we allocate default domains - the most kernel-owned of all - as *user* domains, by virtue of passing the PASID flag?? Except then per patch #4 it's actually a big double-bluff, because asking a driver's .domain_alloc_user op for PASIDs is in fact expected to return an unfinished non-user domain, in spite of the explicitly documented behaviour:
| Unlike @domain_alloc, it is called only by IOMMUFD and | must fully initialize the new domain before return.
???
This is insane. Please implement it in manner which is not insane.
Thanks,
Robin.
Quoted 107 lines
Hence add
iommu_paging_domain_alloc_flags()API which takes flags as parameter. Caller can pass additional parameter to indicate type of domain required, etc.iommu_paging_domain_alloc_flags()internally calls appropriate callback function to allocate a domain.Signed-off-by Jason Gunthorpe <[email protected]>[Added description - Vasant]Signed-off-by Vasant Hegde <[email protected]>Reviewed-by Jason Gunthorpe <[email protected]>Reviewed-by Lu Baolu <[email protected]>Reviewed-by Yi Liu <[email protected]>--- drivers/iommu/iommu.c | 32 +++++++++++++++++++++++++++----- include/linux/iommu.h | 14 +++++++++++--- 2 files changed, 38 insertions(+), 8 deletions(-)drivers/iommu/iommu.c +27
-5@@ -2027,20 +2027,42 @@ struct iommu_domain *iommu_domain_alloc(const struct bus_type *bus)EXPORT_SYMBOL_GPL (iommu_domain_alloc);/** -* iommu_paging_domain_alloc() - Allocate a paging domain +* iommu_paging_domain_alloc_flags() - Allocate a paging domain * @dev: device for which the domain is allocated +* @flags: Enum of iommufd_hwpt_alloc_flags * * Allocate a paging domain which will be managed by a kernel driver. Return -* allocated domain if successful, or a ERR pointer for failure. +* allocated domain if successful, or an ERR pointer for failure. */ -struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int flags) { +const struct iommu_ops *ops; +struct iommu_domain *domain; +if (!dev_has_iommu (dev))return ERR_PTR (-ENODEV ); -return __iommu_domain_alloc (dev_iommu_ops (dev), dev,IOMMU_DOMAIN_UNMANAGED ); + ops =dev_iommu_ops (dev); + +if (ops->domain_alloc_paging && !flags) + domain = ops->domain_alloc_paging (dev); +else if (ops->domain_alloc_user) + domain = ops->domain_alloc_user (dev, flags,NULL ,NULL ); +else if (ops->domain_alloc && !flags) + domain = ops->domain_alloc (IOMMU_DOMAIN_UNMANAGED ); +else +return ERR_PTR (-EOPNOTSUPP ); + +if (IS_ERR (domain)) +return domain; +if (!domain) +return ERR_PTR (-ENOMEM ); + +iommu_domain_init (domain,IOMMU_DOMAIN_UNMANAGED , ops); +return domain; } -EXPORT_SYMBOL_GPL (iommu_paging_domain_alloc); +EXPORT_SYMBOL_GPL (iommu_paging_domain_alloc_flags);void iommu_domain_free (struct iommu_domain *domain) {include/linux/iommu.h +11
-3@@ -511,8 +511,6 @@ static inline int __iommu_copy_struct_from_user_array(* the caller iommu_domain_alloc() returns. * @domain_alloc_user: Allocate an iommu domain corresponding to the input * parameters as defined in include/uapi/linux/iommufd.h. -* Unlike @domain_alloc, it is called only by IOMMUFD and -* must fully initialize the new domain before return. * Upon success, if the @user_data is valid and the @parent * points to a kernel-managed domain, the new domain must be * IOMMU_DOMAIN_NESTED type; otherwise, the @parent must be @@ -789,7 +787,11 @@ extern bool iommu_present(const struct bus_type *bus);extern bool device_iommu_capable (struct device *dev,enum iommu_cap cap);extern bool iommu_group_has_isolated_msi (struct iommu_group *group);extern struct iommu_domain *iommu_domain_alloc (const struct bus_type *bus); -struct iommu_domain *iommu_paging_domain_alloc (struct device *dev); +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev,unsigned int flags); +static inline struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) +{ +return iommu_paging_domain_alloc_flags (dev,0 ); +}extern void iommu_domain_free (struct iommu_domain *domain);extern int iommu_attach_device (struct iommu_domain *domain,struct device *dev);@@ -1096,6 +1098,12 @@ static inline struct iommu_domain *iommu_domain_alloc(const struct bus_type *busreturn NULL ; } +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int flags) +{ +return ERR_PTR (-ENODEV ); +} +static inline struct iommu_domain *iommu_paging_domain_alloc (struct device *dev) {return ERR_PTR (-ENODEV );
Jason Gunthorpe
maintainerRe: [PATCH v4 02/12] iommu: Introduce iommu_paging_domain_alloc_flags()
Quoted 12 lines · Robin Murphy
Quoted 11 lines · Vasant Hegde
From: Jason Gunthorpe <[email protected]>
Currently drivers calls
iommu_paging_domain_alloc(dev)to get an UNMANAGED domain. This is not sufficient to support PASID with UNMANAGED domain as some HW like AMD requires certain page table type to support PASIDs.Also the
domain_alloc_pagingop only passes device as param for domain allocation. This is not sufficient for AMD driver to decide the right page table.
Quoted 6 lines
Quoted 3 lines
Instead of extending
ops->domain_alloc_paging()it was decided to enhanceops->domain_alloc_user()so that caller can pass various additional flags.Wait, what? So
iommu_paging_domain_alloc_flags()opaquely may or may not actually allocate a regular paging domain or a user domain
There is no such thing as a "user domain".
Quoted 2 lines
depending on the flags? But then per patch #3 we allocate default domains - the most kernel-owned of all - as *user* domains,
We are going to rename domain_alloc_user() once this lands and the dust settled, it's purpose has now expanded. I'm going to try to do it for rc7 when all the branches are together.
Quoted 7 lines
return an unfinished non-user domain, in spite of the explicitly documented behaviour:
| Unlike @domain_alloc, it is called only by IOMMUFD and | must fully initialize the new domain before return.
???
That remark about "called only by iommufd" should be removed in this series.
Quoted 1 line
This is insane. Please implement it in manner which is not insane.
There are more steps, calm down.
Jason
RE: [PATCH v4 02/12] iommu: Introduce iommu_paging_domain_alloc_flags()
In reply to Vasant HegdeQuoted 23 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMFrom: Jason Gunthorpe <[email protected]>
Currently drivers calls
iommu_paging_domain_alloc(dev)to get an UNMANAGED domain. This is not sufficient to support PASID with UNMANAGED domain as some HW like AMD requires certain page table type to support PASIDs.Also the
domain_alloc_pagingop only passes device as param for domain allocation. This is not sufficient for AMD driver to decide the right page table.Instead of extending
ops->domain_alloc_paging()it was decided to enhanceops->domain_alloc_user()so that caller can pass various additional flags.Hence add
iommu_paging_domain_alloc_flags()API which takes flags as parameter. Caller can pass additional parameter to indicate type of domain required, etc.iommu_paging_domain_alloc_flags()internally calls appropriate callback function to allocate a domain.
Quoted 6 lines
Signed-off-by Jason Gunthorpe <[email protected]>[Added description - Vasant]Signed-off-by Vasant Hegde <[email protected]>Reviewed-by Jason Gunthorpe <[email protected]>Reviewed-by Lu Baolu <[email protected]>Reviewed-by Yi Liu <[email protected]>
Vasant Hegde
maintainerPATCH v4 3/12 iommu: Add new flag to explictly request PASID capable domain
In reply to Vasant HegdeFrom: Jason Gunthorpe <[email protected]>
Introduce new flag (IOMMU_HWPT_ALLOC_PASID) to domain_alloc_users() ops. If IOMMU supports PASID it will allocate domain. Otherwise return error. In error path check for -EOPNOTSUPP and try to allocate non-PASID domain so that DMA-API mode work fine for drivers which does not support PASID as well.
Also modify __iommu_group_alloc_default_domain() to call iommu_paging_domain_alloc_flags() with appropriate flag when allocating paging domain.
--- drivers/iommu/iommu.c | 56 +++++++++++++++++++++++++++++------- include/uapi/linux/iommufd.h | 8 ++++++ 2 files changed, 53 insertions(+), 11 deletions(-)
drivers/iommu/iommu.c +45 -11
@@ -32,6 +32,7 @@#include <trace/events/iommu.h> #include <linux/sched/mm.h> #include <linux/msi.h> +#include <uapi/linux/iommufd.h> #include "dma-iommu.h" #include "iommu-priv.h"
@@ -99,6 +100,9 @@ static int __iommu_attach_device(struct iommu_domain *domain, struct device *dev);static int __iommu_attach_group (struct iommu_domain *domain,struct iommu_group *group); +static struct iommu_domain *__iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int type, +unsigned int flags);enum {IOMMU_SET_DOMAIN_MUST_SUCCEED =1 <<0 ,
@@ -1589,8 +1593,30 @@ EXPORT_SYMBOL_GPL(fsl_mc_device_group);static struct iommu_domain *__iommu_group_alloc_default_domain (struct iommu_group *group,int req_type) { +struct device *dev =iommu_group_first_dev (group); +struct iommu_domain *dom; +if (group->default_domain && group->default_domain->type == req_type)return group->default_domain; + +/* +* When allocating the DMA API domain assume that the driver is going to +* use PASID and make sure the RID's domain is PASID compatible. +*/ +if (req_type & __IOMMU_DOMAIN_PAGING) { + dom =__iommu_paging_domain_alloc_flags (dev, req_type, + dev->iommu->max_pasids ?IOMMU_HWPT_ALLOC_PASID :0 ); + +/* +* If driver does not support PASID feature then +* try to allocate non-PASID domain +*/ +if (PTR_ERR (dom) == -EOPNOTSUPP ) + dom =__iommu_paging_domain_alloc_flags (dev, req_type,0 ); + +return dom; + } +return __iommu_group_domain_alloc (group, req_type); }
@@ -2026,16 +2052,9 @@ struct iommu_domain *iommu_domain_alloc(const struct bus_type *bus) }EXPORT_SYMBOL_GPL (iommu_domain_alloc); -/** -* iommu_paging_domain_alloc_flags() - Allocate a paging domain -* @dev: device for which the domain is allocated -* @flags: Enum of iommufd_hwpt_alloc_flags -* -* Allocate a paging domain which will be managed by a kernel driver. Return -* allocated domain if successful, or an ERR pointer for failure. -*/ -struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, -unsigned int flags) +static struct iommu_domain * +__iommu_paging_domain_alloc_flags (struct device *dev,unsigned int type, +unsigned int flags) {const struct iommu_ops *ops;struct iommu_domain *domain;
@@ -2059,9 +2078,24 @@ struct iommu_domain *iommu_paging_domain_alloc_flags(struct device *dev,if (!domain)return ERR_PTR (-ENOMEM ); -iommu_domain_init (domain,IOMMU_DOMAIN_UNMANAGED , ops); +iommu_domain_init (domain, type, ops);return domain; } + +/** +* iommu_paging_domain_alloc_flags() - Allocate a paging domain +* @dev: device for which the domain is allocated +* @flags: Bitmap of iommufd_hwpt_alloc_flags +* +* Allocate a paging domain which will be managed by a kernel driver. Return +* allocated domain if successful, or an ERR pointer for failure. +*/ +struct iommu_domain *iommu_paging_domain_alloc_flags (struct device *dev, +unsigned int flags) +{ +return __iommu_paging_domain_alloc_flags (dev, +IOMMU_DOMAIN_UNMANAGED , flags); +}EXPORT_SYMBOL_GPL (iommu_paging_domain_alloc_flags);void iommu_domain_free (struct iommu_domain *domain)
include/uapi/linux/iommufd.h +8 -0
@@ -359,11 +359,19 @@ struct iommu_vfio_ioas {* enforced on device attachment * @IOMMU_HWPT_FAULT_ID_VALID: The fault_id field of hwpt allocation data is * valid. +* @IOMMU_HWPT_ALLOC_PASID: Requests a domain that can be used with PASID. The +* domain can be attached to any PASID on the device. +* Any domain attached to the non-PASID part of the +* device must also be flaged, otherwise attaching a +* PASID will blocked. +* If IOMMU does not support PASID it will return +* error (-EOPNOTSUPP). */ enum iommufd_hwpt_alloc_flags {IOMMU_HWPT_ALLOC_NEST_PARENT =1 <<0 ,IOMMU_HWPT_ALLOC_DIRTY_TRACKING =1 <<1 ,IOMMU_HWPT_FAULT_ID_VALID =1 <<2 , +IOMMU_HWPT_ALLOC_PASID =1 <<3 , };/**
Signature · 1 line
2.31.1
Re: [PATCH v4 03/12] iommu: Add new flag to explictly request PASID capable domain
Quoted 12 lines · Vasant Hegde
From: Jason Gunthorpe<[email protected]>
Introduce new flag (
IOMMU_HWPT_ALLOC_PASID) todomain_alloc_users()ops. If IOMMU supports PASID it will allocate domain. Otherwise return error. In error path check for-EOPNOTSUPPand try to allocate non-PASID domain so that DMA-API mode work fine for drivers which does not support PASID as well.Also modify
__iommu_group_alloc_default_domain()to calliommu_paging_domain_alloc_flags()with appropriate flag when allocating paging domain.
Quoted 7 lines
Signed-off-by Jason Gunthorpe<[email protected]>Co-developed-by Vasant Hegde<[email protected]>Signed-off-by Vasant Hegde<[email protected]>--- drivers/iommu/iommu.c | 56 +++++++++++++++++++++++++++++------- include/uapi/linux/iommufd.h | 8 ++++++ 2 files changed, 53 insertions(+), 11 deletions(-)
Thanks,
baolu
RE: [PATCH v4 03/12] iommu: Add new flag to explictly request PASID capable domain
In reply to Vasant HegdeQuoted 12 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMFrom: Jason Gunthorpe <[email protected]>
Introduce new flag (
IOMMU_HWPT_ALLOC_PASID) todomain_alloc_users()ops.
If IOMMU supports PASID it will allocate domain. Otherwise return error. In error path check for-EOPNOTSUPPand try to allocate non-PASID domain so that DMA-API mode work fine for drivers which does not support PASID as well.
Quoted 7 lines
Also modify
__iommu_group_alloc_default_domain()to calliommu_paging_domain_alloc_flags()with appropriate flag when allocating paging domain.Signed-off-by Jason Gunthorpe <[email protected]>Co-developed-by Vasant Hegde <[email protected]>Signed-off-by Vasant Hegde <[email protected]>
Vasant Hegde
maintainerPATCH v4 4/12 iommu/arm-smmu-v3: Enhance domain_alloc_user() to allocate PASID capable domain
In reply to Vasant HegdeCore layer is modified to call domain_alloc_user() to allocate PASID capable domain. Enhance arm_smmu_domain_alloc_user() to allocate PASID capable domain based on the 'flags' parameter.
--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +5 -1
@@ -3084,7 +3084,8 @@ arm_smmu_domain_alloc_user(struct device *dev, u32 flags, const struct iommu_user_data *user_data) {struct arm_smmu_master *master =dev_iommu_priv_get (dev); -const u32 PAGING_FLAGS =IOMMU_HWPT_ALLOC_DIRTY_TRACKING ; +const u32 PAGING_FLAGS =IOMMU_HWPT_ALLOC_DIRTY_TRACKING | +IOMMU_HWPT_ALLOC_PASID ;struct arm_smmu_domain *smmu_domain;int ret;
@@ -3093,6 +3094,9 @@ arm_smmu_domain_alloc_user(struct device *dev, u32 flags,if (parent || user_data)return ERR_PTR (-EOPNOTSUPP ); +if (flags &IOMMU_HWPT_ALLOC_PASID ) +return arm_smmu_domain_alloc_paging (dev); + smmu_domain =arm_smmu_domain_alloc ();if (IS_ERR (smmu_domain))return ERR_CAST (smmu_domain);
Signature · 1 line
2.31.1
Re: [PATCH v4 04/12] iommu/arm-smmu-v3: Enhance domain_alloc_user() to allocate PASID capable domain
Quoted 8 lines · Vasant Hegde
Core layer is modified to call
domain_alloc_user()to allocate PASID capable domain. Enhancearm_smmu_domain_alloc_user()to allocate PASID capable domain based on the 'flags' parameter.Signed-off-by Vasant Hegde <[email protected]>--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
Jason
RE: [PATCH v4 04/12] iommu/arm-smmu-v3: Enhance domain_alloc_user() to allocate PASID capable domain
In reply to Vasant HegdeQuoted 8 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMCore layer is modified to call
domain_alloc_user()to allocate PASID capable domain. Enhancearm_smmu_domain_alloc_user()to allocate PASID capable domain based on the 'flags' parameter.Signed-off-by Vasant Hegde <[email protected]>
Vasant Hegde
maintainerPATCH v4 5/12 iommu/amd: Add helper function to check GIOSUP/GTSUP
In reply to Vasant Hegdeamd_iommu_gt_ppr_supported() only checks for GTSUP. To support PASID with V2 page table we need GIOSUP as well. Hence add new helper function to check GIOSUP/GTSUP.
--- drivers/iommu/amd/amd_iommu.h | 7 ++++++- drivers/iommu/amd/init.c | 3 +-- 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/iommu/amd/amd_iommu.h +6 -1
@@ -118,9 +118,14 @@ static inline bool check_feature2(u64 mask)return (amd_iommu_efr2 & mask); } +static inline bool amd_iommu_v2_pgtbl_supported (void ) +{ +return (check_feature (FEATURE_GIOSUP ) &&check_feature (FEATURE_GT )); +} +static inline bool amd_iommu_gt_ppr_supported (void ) { -return (check_feature (FEATURE_GT ) && +return (amd_iommu_v2_pgtbl_supported () &&check_feature (FEATURE_PPR ) &&check_feature (FEATURE_EPHSUP )); }
drivers/iommu/amd/init.c +1 -2
@@ -2071,8 +2071,7 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)init_iommu_perf_ctr (iommu);if (amd_iommu_pgtable ==AMD_IOMMU_V2 ) { -if (!check_feature (FEATURE_GIOSUP ) || - !check_feature (FEATURE_GT )) { +if (!amd_iommu_v2_pgtbl_supported ()) {pr_warn ("Cannot enable v2 page table for DMA-API. Fallback to v1.\n" ); amd_iommu_pgtable =AMD_IOMMU_V1 ; }
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 6/12 iommu/amd: Move V2 page table support check to early_amd_iommu_init()
In reply to Vasant Hegdeamd_iommu_pgtable validation has to be done before calling iommu_snp_enable(). It can be done immediately after reading IOMMU features. Hence move this check to early_amd_iommu_init().
--- drivers/iommu/amd/init.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/iommu/amd/init.c +7 -7
@@ -2070,13 +2070,6 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)init_iommu_perf_ctr (iommu); -if (amd_iommu_pgtable ==AMD_IOMMU_V2 ) { -if (!amd_iommu_v2_pgtbl_supported ()) { -pr_warn ("Cannot enable v2 page table for DMA-API. Fallback to v1.\n" ); - amd_iommu_pgtable =AMD_IOMMU_V1 ; - } - } -if (is_rd890_iommu (iommu->dev)) {int i, j;
@@ -3090,6 +3083,13 @@ static int __init early_amd_iommu_init(void) FIELD_GET(FEATURE_GATS, amd_iommu_efr) == GUEST_PGTABLE_5_LEVEL) amd_iommu_gpt_level =PAGE_MODE_5_LEVEL ; +if (amd_iommu_pgtable ==AMD_IOMMU_V2 ) { +if (!amd_iommu_v2_pgtbl_supported ()) { +pr_warn ("Cannot enable v2 page table for DMA-API. Fallback to v1.\n" ); + amd_iommu_pgtable =AMD_IOMMU_V1 ; + } + } +/* Disable any previously enabled IOMMUs */ if (!is_kdump_kernel () || amd_iommu_disabled)disable_iommus ();
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 7/12 iommu/amd: Separate page table setup from domain allocation
In reply to Vasant HegdeCurrently protection_domain_alloc() allocates domain and also sets up page table. Page table setup is required for PAGING domain only. Domain type like SVA doesn't need page table. Hence move page table setup code to separate function.
Also SVA domain allocation path does not call pdom_setup_pgtable(). Hence remove IOMMU_DOMAIN_SVA type check.
--- drivers/iommu/amd/iommu.c | 42 ++++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 16 deletions(-)
drivers/iommu/amd/iommu.c +26 -16
@@ -2265,28 +2265,36 @@ void protection_domain_free(struct protection_domain *domain)struct protection_domain *protection_domain_alloc (unsigned int type,int nid) { -struct io_pgtable_ops *pgtbl_ops;struct protection_domain *domain; -int pgtable; domain =kzalloc (sizeof (*domain),GFP_KERNEL );if (!domain)return NULL ; domain->id =domain_id_alloc (); -if (!domain->id) - goto err_free; +if (!domain->id) { +kfree (domain); +return NULL ; + }spin_lock_init (&domain->lock);INIT_LIST_HEAD (&domain->dev_list);INIT_LIST_HEAD (&domain->dev_data_list); domain->iop.pgtbl.cfg.amd.nid = nid; +return domain; +} + +static int pdom_setup_pgtable (struct protection_domain *domain, +unsigned int type) +{ +struct io_pgtable_ops *pgtbl_ops; +int pgtable; +switch (type) {/* No need to allocate io pgtable ops in passthrough mode */ case IOMMU_DOMAIN_IDENTITY : -case IOMMU_DOMAIN_SVA : -return domain; +return 0 ;case IOMMU_DOMAIN_DMA : pgtable = amd_iommu_pgtable;break ;
@@ -2298,7 +2306,7 @@ struct protection_domain *protection_domain_alloc(unsigned int type, int nid) pgtable =AMD_IOMMU_V1 ;break ;default : - goto err_id; +return -EINVAL ; }switch (pgtable) {
@@ -2309,20 +2317,14 @@ struct protection_domain *protection_domain_alloc(unsigned int type, int nid) domain->pd_mode =PD_MODE_V2 ;break ;default : - goto err_id; +return -EINVAL ; } - pgtbl_ops =alloc_io_pgtable_ops (pgtable, &domain->iop.pgtbl.cfg, domain);if (!pgtbl_ops) - goto err_id; +return -ENOMEM ; -return domain; -err_id: -domain_id_free (domain->id); -err_free: -kfree (domain); -return NULL ; +return 0 ; }static inline u64 dma_max_address (void )
@@ -2345,6 +2347,7 @@ static struct iommu_domain *do_iommu_domain_alloc(unsigned int type,bool dirty_tracking = flags &IOMMU_HWPT_ALLOC_DIRTY_TRACKING ;struct protection_domain *domain;struct amd_iommu *iommu =NULL ; +int ret;if (dev) iommu =get_amd_iommu_from_dev (dev);
@@ -2364,6 +2367,13 @@ static struct iommu_domain *do_iommu_domain_alloc(unsigned int type,if (!domain)return ERR_PTR (-ENOMEM ); + ret =pdom_setup_pgtable (domain, type); +if (ret) { +domain_id_free (domain->id); +kfree (domain); +return ERR_PTR (ret); + } + domain->domain.geometry.aperture_start =0 ; domain->domain.geometry.aperture_end =dma_max_address (); domain->domain.geometry.force_aperture = true;
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 8/12 iommu/amd: Pass page table type as param to pdom_setup_pgtable()
In reply to Vasant HegdeCurrent code forces v1 page table for UNMANAGED domain and global page table type (amd_iommu_pgtable) for rest of paging domain.
Following patch series adds support for domain_alloc_paging() ops. Also enhances domain_alloc_user() to allocate page table based on 'flags.
Hence pass page table type as parameter to pdomain_setup_pgtable(). So that caller can decide right page table type. Also update dma_max_address() to take pgtable as parameter.
--- drivers/iommu/amd/iommu.c | 43 +++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 24 deletions(-)
drivers/iommu/amd/iommu.c +19 -24
@@ -2286,28 +2286,13 @@ struct protection_domain *protection_domain_alloc(unsigned int type, int nid) }static int pdom_setup_pgtable (struct protection_domain *domain, -unsigned int type) +unsigned int type,int pgtable) {struct io_pgtable_ops *pgtbl_ops; -int pgtable; -switch (type) {/* No need to allocate io pgtable ops in passthrough mode */ -case IOMMU_DOMAIN_IDENTITY : +if (!(type & __IOMMU_DOMAIN_PAGING))return 0 ; -case IOMMU_DOMAIN_DMA : - pgtable = amd_iommu_pgtable; -break ; -/* -* Force IOMMU v1 page table when allocating -* domain for pass-through devices. -*/ -case IOMMU_DOMAIN_UNMANAGED : - pgtable =AMD_IOMMU_V1 ; -break ; -default : -return -EINVAL ; - }switch (pgtable) {case AMD_IOMMU_V1 :
@@ -2319,6 +2304,7 @@ static int pdom_setup_pgtable(struct protection_domain *domain,default :return -EINVAL ; } + pgtbl_ops =alloc_io_pgtable_ops (pgtable, &domain->iop.pgtbl.cfg, domain);if (!pgtbl_ops)
@@ -2327,9 +2313,9 @@ static int pdom_setup_pgtable(struct protection_domain *domain,return 0 ; } -static inline u64 dma_max_address (void ) +static inline u64 dma_max_address (int pgtable) { -if (amd_iommu_pgtable ==AMD_IOMMU_V1 ) +if (pgtable ==AMD_IOMMU_V1 )return ~0ULL ;/* V2 with 4/5 level page table */
@@ -2342,7 +2328,8 @@ static bool amd_iommu_hd_support(struct amd_iommu *iommu) }static struct iommu_domain *do_iommu_domain_alloc (unsigned int type, -struct device *dev,u32 flags) +struct device *dev, +u32 flags,int pgtable) {bool dirty_tracking = flags &IOMMU_HWPT_ALLOC_DIRTY_TRACKING ;struct protection_domain *domain;
@@ -2367,7 +2354,7 @@ static struct iommu_domain *do_iommu_domain_alloc(unsigned int type,if (!domain)return ERR_PTR (-ENOMEM ); - ret =pdom_setup_pgtable (domain, type); + ret =pdom_setup_pgtable (domain, type, pgtable);if (ret) {domain_id_free (domain->id);kfree (domain);
@@ -2375,7 +2362,7 @@ static struct iommu_domain *do_iommu_domain_alloc(unsigned int type, } domain->domain.geometry.aperture_start =0 ; - domain->domain.geometry.aperture_end =dma_max_address (); + domain->domain.geometry.aperture_end =dma_max_address (pgtable); domain->domain.geometry.force_aperture = true; domain->domain.pgsize_bitmap = domain->iop.pgtbl.cfg.pgsize_bitmap;
@@ -2393,8 +2380,16 @@ static struct iommu_domain *do_iommu_domain_alloc(unsigned int type,static struct iommu_domain *amd_iommu_domain_alloc (unsigned int type) {struct iommu_domain *domain; +int pgtable = amd_iommu_pgtable; + +/* +* Force IOMMU v1 page table when allocating +* domain for pass-through devices. +*/ +if (type ==IOMMU_DOMAIN_UNMANAGED ) + pgtable =AMD_IOMMU_V1 ; - domain =do_iommu_domain_alloc (type,NULL ,0 ); + domain =do_iommu_domain_alloc (type,NULL ,0 , pgtable);if (IS_ERR (domain))return NULL ;
@@ -2412,7 +2407,7 @@ amd_iommu_domain_alloc_user(struct device *dev, u32 flags,if ((flags & ~IOMMU_HWPT_ALLOC_DIRTY_TRACKING ) || parent || user_data)return ERR_PTR (-EOPNOTSUPP ); -return do_iommu_domain_alloc (type, dev, flags); +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V1 ); }void amd_iommu_domain_free (struct iommu_domain *dom)
Signature · 1 line
2.31.1
Vasant Hegde
maintainerPATCH v4 9/12 iommu/amd: Enhance amd_iommu_domain_alloc_user()
In reply to Vasant HegdePrevious patch enhanced core layer to check device PASID capability and pass right flags to ops->domain_alloc_user().
Enhance amd_iommu_domain_alloc_user() to allocate domain with appropriate page table based on flags parameter.
- If flags is empty then allocate domain with default page table type. This will eventually replace ops->domain_alloc().
For UNMANAGED domain, core will call this interface with flags=0. So AMD driver will continue to allocate V1 page table.
- If IOMMU_HWPT_ALLOC_PASID flags is passed then allocate domain with v2 page table.
--- drivers/iommu/amd/iommu.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/iommu/amd/iommu.c +17 -1
@@ -2403,10 +2403,26 @@ amd_iommu_domain_alloc_user(struct device *dev, u32 flags, {unsigned int type =IOMMU_DOMAIN_UNMANAGED ; +const u32 supported_flags =IOMMU_HWPT_ALLOC_DIRTY_TRACKING | +IOMMU_HWPT_ALLOC_PASID ; -if ((flags & ~IOMMU_HWPT_ALLOC_DIRTY_TRACKING ) || parent || user_data) +if ((flags & ~supported_flags) || parent || user_data)return ERR_PTR (-EOPNOTSUPP ); +/* Allocate domain with default page table */ +if (!flags) { +return do_iommu_domain_alloc (IOMMU_DOMAIN_DMA , + dev,0 , amd_iommu_pgtable); + } + +/* Allocate domain with v2 page table if IOMMU supports PASID. */ +if (flags &IOMMU_HWPT_ALLOC_PASID ) { +if (!amd_iommu_pasid_supported ()) +return ERR_PTR (-EOPNOTSUPP ); + +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V2 ); + } +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V1 ); }
Signature · 1 line
2.31.1
Re: [PATCH v4 09/12] iommu/amd: Enhance amd_iommu_domain_alloc_user()
Quoted 38 lines · Vasant Hegde
Previous patch enhanced core layer to check device PASID capability and pass right flags to
ops->domain_alloc_user().Enhance
amd_iommu_domain_alloc_user()to allocate domain with appropriate page table based on flags parameter.
- If flags is empty then allocate domain with default page table type. This will eventually replaceops->domain_alloc().
For UNMANAGED domain, core will call this interface with flags=0. So AMD driver will continue to allocate V1 page table.- If
IOMMU_HWPT_ALLOC_PASIDflags is passed then allocate domain with v2 page table.Signed-off-by Vasant Hegde <[email protected]>--- drivers/iommu/amd/iommu.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)drivers/iommu/amd/iommu.c +8
-1@@ -2403,10 +2403,26 @@ amd_iommu_domain_alloc_user(struct device *dev, u32 flags, {unsigned int type =IOMMU_DOMAIN_UNMANAGED ; +const u32 supported_flags =IOMMU_HWPT_ALLOC_DIRTY_TRACKING | +IOMMU_HWPT_ALLOC_PASID ; -if ((flags & ~IOMMU_HWPT_ALLOC_DIRTY_TRACKING ) || parent || user_data) +if ((flags & ~supported_flags) || parent || user_data)return ERR_PTR (-EOPNOTSUPP ); +/* Allocate domain with default page table */ +if (!flags) { +return do_iommu_domain_alloc (IOMMU_DOMAIN_DMA , + dev,0 , amd_iommu_pgtable); + }
drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device *dev, u32 flags, · line 2426
Quoted 10 lines
drivers/iommu/amd/iommu.c +9
-0+ +/* Allocate domain with v2 page table if IOMMU supports PASID. */ +if (flags &IOMMU_HWPT_ALLOC_PASID ) { +if (!amd_iommu_pasid_supported ()) +return ERR_PTR (-EOPNOTSUPP ); + +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V2 ); + } +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V1 );
This should be more specific about what the dirty_tracking configuration needs:
if (flags & IOMMU_HWPT_ALLOC_DIRTY_TRACKING) {
if (!amd_iommu_hd_support(iommu) ||
(flags & IOMMU_HWPT_ALLOC_PASID))
return ERR_PTR(-EOPNOTSUPP);
return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V1);
}
if (flags & IOMMU_HWPT_ALLOC_PASID) {
if (!amd_iommu_pasid_supported())
return ERR_PTR(-EOPNOTSUPP);
return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V2);
}
/* If nothing specific is required use the kernel commandline default */
return do_iommu_domain_alloc(IOMMU_DOMAIN_DMA, dev, 0,
amd_iommu_pgtable);Jason
Vasant Hegde
maintainerRe: [PATCH v4 09/12] iommu/amd: Enhance amd_iommu_domain_alloc_user()
Jason,
Quoted 44 lines · Jason Gunthorpe
Quoted 43 lines · Vasant Hegde
Previous patch enhanced core layer to check device PASID capability and pass right flags to
ops->domain_alloc_user().Enhance
amd_iommu_domain_alloc_user()to allocate domain with appropriate page table based on flags parameter.
- If flags is empty then allocate domain with default page table type. This will eventually replaceops->domain_alloc().
For UNMANAGED domain, core will call this interface with flags=0. So AMD driver will continue to allocate V1 page table.- If
IOMMU_HWPT_ALLOC_PASIDflags is passed then allocate domain with v2 page table.Signed-off-by Vasant Hegde <[email protected]>--- drivers/iommu/amd/iommu.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)drivers/iommu/amd/iommu.c +13
-1@@ -2403,10 +2403,26 @@ amd_iommu_domain_alloc_user(struct device *dev, u32 flags, {unsigned int type =IOMMU_DOMAIN_UNMANAGED ; +const u32 supported_flags =IOMMU_HWPT_ALLOC_DIRTY_TRACKING | +IOMMU_HWPT_ALLOC_PASID ; -if ((flags & ~IOMMU_HWPT_ALLOC_DIRTY_TRACKING ) || parent || user_data) +if ((flags & ~supported_flags) || parent || user_data)return ERR_PTR (-EOPNOTSUPP ); +/* Allocate domain with default page table */ +if (!flags) { +return do_iommu_domain_alloc (IOMMU_DOMAIN_DMA , + dev,0 , amd_iommu_pgtable); + } + +/* Allocate domain with v2 page table if IOMMU supports PASID. */ +if (flags &IOMMU_HWPT_ALLOC_PASID ) { +if (!amd_iommu_pasid_supported ()) +return ERR_PTR (-EOPNOTSUPP );
Quoted 8 lines
drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device *dev, u32 flags, · line 2426
Quoted 5 lines
drivers/iommu/amd/iommu.c +4
-0+ +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V2 ); + } +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V1 );This should be more specific about what the
dirty_trackingconfiguration needs:
Sure. Fixed it.
-Vasant
Quoted 19 lines
if (flags & IOMMU_HWPT_ALLOC_DIRTY_TRACKING) { if (!amd_iommu_hd_support(iommu) || (flags & IOMMU_HWPT_ALLOC_PASID)) return ERR_PTR(-EOPNOTSUPP); return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V1); } if (flags & IOMMU_HWPT_ALLOC_PASID) { if (!amd_iommu_pasid_supported()) return ERR_PTR(-EOPNOTSUPP); return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V2); } /* If nothing specific is required use the kernel commandline default */ return do_iommu_domain_alloc(IOMMU_DOMAIN_DMA, dev, 0, amd_iommu_pgtable);Jason
RE: [PATCH v4 09/12] iommu/amd: Enhance amd_iommu_domain_alloc_user()
In reply to Jason GunthorpeQuoted 73 lines
From: Jason Gunthorpe <[email protected]>
Sent: Wednesday, October 23, 2024 8:46 PMQuoted 11 lines · Vasant Hegde
Previous patch enhanced core layer to check device PASID capability and pass right flags to
ops->domain_alloc_user().Enhance
amd_iommu_domain_alloc_user()to allocate domain with appropriate page table based on flags parameter.
- If flags is empty then allocate domain with default page table type. This will eventually replaceops->domain_alloc().
For UNMANAGED domain, core will call this interface with flags=0. So AMD driver will continue to allocate V1 page table.- If
IOMMU_HWPT_ALLOC_PASIDflags is passed then allocate domainwith v2
drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device
Quoted 12 lines
page table.
Signed-off-by Vasant Hegde <[email protected]>--- drivers/iommu/amd/iommu.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)drivers/iommu/amd/iommu.c +0
-0@@ -2403,10 +2403,26 @@ amd_iommu_domain_alloc_user(struct device*dev, u32 flags,
drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device *dev, u32 flags,
Quoted 4 lines
drivers/iommu/amd/iommu.c +1
-0{unsigned int type =IOMMU_DOMAIN_UNMANAGED ; + const u32 supported_flags =
IOMMU_HWPT_ALLOC_DIRTY_TRACKING|drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device · line 2406
Quoted 1 line
drivers/iommu/amd/iommu.c +1
-0+IOMMU_HWPT_ALLOC_PASID;drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device · line 2405
Quoted 2 lines
drivers/iommu/amd/iommu.c +0
-1- if ((flags & ~IOMMU_HWPT_ALLOC_DIRTY_TRACKING) || parent ||
user_data)Quoted 5 lines
drivers/iommu/amd/iommu.c +3
-0+if ((flags & ~supported_flags) || parent || user_data)return ERR_PTR (-EOPNOTSUPP ); +/* Allocate domain with default page table */ +if (!flags) {drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device *dev, u32 flags,
Quoted 10 lines
drivers/iommu/amd/iommu.c +10
-0+return do_iommu_domain_alloc (IOMMU_DOMAIN_DMA , + dev,0 , amd_iommu_pgtable); + } + +/* Allocate domain with v2 page table if IOMMU supports PASID. */ +if (flags &IOMMU_HWPT_ALLOC_PASID ) { +if (!amd_iommu_pasid_supported ()) +return ERR_PTR (-EOPNOTSUPP ); + + return do_iommu_domain_alloc(type, dev, flags,
AMD_IOMMU_V2);drivers/iommu/amd/iommu.c amd_iommu_domain_alloc_user(struct device *dev, u32 flags, · line 2426
Quoted 3 lines
drivers/iommu/amd/iommu.c +2
-0+ } +return do_iommu_domain_alloc (type, dev, flags,AMD_IOMMU_V1 );This should be more specific about what the
dirty_trackingconfiguration needs:if (flags & IOMMU_HWPT_ALLOC_DIRTY_TRACKING) { if (!amd_iommu_hd_support(iommu) || (flags & IOMMU_HWPT_ALLOC_PASID)) return ERR_PTR(-EOPNOTSUPP); return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V1); } if (flags & IOMMU_HWPT_ALLOC_PASID) { if (!amd_iommu_pasid_supported()) return ERR_PTR(-EOPNOTSUPP);
Quoted 9 lines
return do_iommu_domain_alloc(type, dev, flags, AMD_IOMMU_V2); } /* If nothing specific is required use the kernel commandline default */ return do_iommu_domain_alloc(IOMMU_DOMAIN_DMA, dev, 0, amd_iommu_pgtable);
with that fix,
Vasant Hegde
maintainerPATCH v4 10/12 iommu/amd: Implement global identity domain
In reply to Vasant HegdeImplement global identity domain. All device groups in identity domain will share this domain.
In attach device path, based on device capability it will allocate per device domain ID and GCR3 table. So that it can support SVA.
--- drivers/iommu/amd/amd_iommu.h | 1 + drivers/iommu/amd/init.c | 3 +++ drivers/iommu/amd/iommu.c | 36 +++++++++++++++++++++++++++++++---- 3 files changed, 36 insertions(+), 4 deletions(-)
drivers/iommu/amd/amd_iommu.h +1 -0
@@ -46,6 +46,7 @@ extern int amd_iommu_gpt_level;extern unsigned long amd_iommu_pgsize_bitmap;/* Protection domain ops */ +void amd_iommu_init_identity_domain (void );struct protection_domain *protection_domain_alloc (unsigned int type,int nid);void protection_domain_free (struct protection_domain *domain); struct iommu_domain *amd_iommu_domain_alloc_sva(struct device *dev,
drivers/iommu/amd/init.c +3 -0
@@ -2164,6 +2164,9 @@ static int __init amd_iommu_init_pci(void)struct amd_iommu_pci_seg *pci_seg;int ret; +/* Init global identity domain before registering IOMMU */ +amd_iommu_init_identity_domain (); +for_each_iommu (iommu) { ret =iommu_init_pci (iommu);if (ret) {
drivers/iommu/amd/iommu.c +32 -4
@@ -74,6 +74,9 @@ struct kmem_cache *amd_iommu_irq_cache;static void detach_device (struct device *dev); +static int amd_iommu_attach_device (struct iommu_domain *dom, +struct device *dev); +static void set_dte_entry (struct amd_iommu *iommu,struct iommu_dev_data *dev_data);
@@ -2263,6 +2266,14 @@ void protection_domain_free(struct protection_domain *domain)kfree (domain); } +static void protection_domain_init (struct protection_domain *domain,int nid) +{ +spin_lock_init (&domain->lock); +INIT_LIST_HEAD (&domain->dev_list); +INIT_LIST_HEAD (&domain->dev_data_list); + domain->iop.pgtbl.cfg.amd.nid = nid; +} +struct protection_domain *protection_domain_alloc (unsigned int type,int nid) {struct protection_domain *domain;
@@ -2277,10 +2288,7 @@ struct protection_domain *protection_domain_alloc(unsigned int type, int nid)return NULL ; } -spin_lock_init (&domain->lock); -INIT_LIST_HEAD (&domain->dev_list); -INIT_LIST_HEAD (&domain->dev_data_list); - domain->iop.pgtbl.cfg.amd.nid = nid; +protection_domain_init (domain, nid);return domain; }
@@ -2465,6 +2473,25 @@ static struct iommu_domain blocked_domain = { } }; +static struct protection_domain identity_domain; + +static const struct iommu_domain_ops identity_domain_ops = { + .attach_dev = amd_iommu_attach_device, +}; + +void amd_iommu_init_identity_domain (void ) +{ +struct iommu_domain *domain = &identity_domain.domain; + + domain->type =IOMMU_DOMAIN_IDENTITY ; + domain->ops = &identity_domain_ops; + domain->owner = &amd_iommu_ops; + + identity_domain.id =domain_id_alloc (); + +protection_domain_init (&identity_domain,NUMA_NO_NODE ); +} +static int amd_iommu_attach_device (struct iommu_domain *dom,struct device *dev) {
@@ -2863,6 +2890,7 @@ static int amd_iommu_dev_disable_feature(struct device *dev,const struct iommu_ops amd_iommu_ops = { .capable = amd_iommu_capable, .blocked_domain = &blocked_domain, + .identity_domain = &identity_domain.domain, .domain_alloc = amd_iommu_domain_alloc, .domain_alloc_user = amd_iommu_domain_alloc_user, .domain_alloc_sva = amd_iommu_domain_alloc_sva,
Signature · 1 line
2.31.1
RE: [PATCH v4 10/12] iommu/amd: Implement global identity domain
Quoted 11 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMImplement global identity domain. All device groups in identity domain will share this domain.
In attach device path, based on device capability it will allocate per device domain ID and GCR3 table. So that it can support SVA.
Signed-off-by Vasant Hegde <[email protected]>Reviewed-by Jason Gunthorpe <[email protected]>
Vasant Hegde
maintainerPATCH v4 11/12 iommu: Put domain allocation in __iommu_group_alloc_blocking_domain()
In reply to Vasant HegdeFrom: Jason Gunthorpe <[email protected]>
There is no longer a reason to call __iommu_domain_alloc() to allocate the blocking domain. All drivers that support a native blocking domain provide it via the ops, for other drivers we should call iommu_paging_domain_alloc().
__iommu_group_alloc_blocking_domain() is the only place that allocates an BLOCKED domain, so move the ops->blocked_domain logic there.
--- drivers/iommu/iommu.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/iommu/iommu.c +13 -12
@@ -1985,8 +1985,6 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops,if (alloc_type ==IOMMU_DOMAIN_IDENTITY && ops->identity_domain)return ops->identity_domain; -else if (alloc_type ==IOMMU_DOMAIN_BLOCKED && ops->blocked_domain) -return ops->blocked_domain;else if (type & __IOMMU_DOMAIN_PAGING && ops->domain_alloc_paging) domain = ops->domain_alloc_paging (dev);else if (ops->domain_alloc)
@@ -3212,22 +3210,25 @@ void iommu_device_unuse_default_domain(struct device *dev)static int __iommu_group_alloc_blocking_domain (struct iommu_group *group) { +struct device *dev =iommu_group_first_dev (group); +const struct iommu_ops *ops =dev_iommu_ops (dev);struct iommu_domain *domain;if (group->blocking_domain)return 0 ; - domain =__iommu_group_domain_alloc (group,IOMMU_DOMAIN_BLOCKED ); -if (IS_ERR (domain)) { -/* -* For drivers that do not yet understand IOMMU_DOMAIN_BLOCKED -* create an empty domain instead. -*/ - domain =__iommu_group_domain_alloc (group, -IOMMU_DOMAIN_UNMANAGED ); -if (IS_ERR (domain)) -return PTR_ERR (domain); +if (ops->blocked_domain) { + group->blocking_domain = ops->blocked_domain; +return 0 ; } + +/* +* For drivers that do not yet understand IOMMU_DOMAIN_BLOCKED create an +* empty PAGING domain instead. +*/ + domain =iommu_paging_domain_alloc (dev); +if (IS_ERR (domain)) +return PTR_ERR (domain); group->blocking_domain = domain;return 0 ; }
Signature · 1 line
2.31.1
RE: [PATCH v4 11/12] iommu: Put domain allocation in __iommu_group_alloc_blocking_domain()
Quoted 10 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMFrom: Jason Gunthorpe <[email protected]>
There is no longer a reason to call
__iommu_domain_alloc()to allocate the blocking domain. All drivers that support a native blocking domain provide it via the ops, for other drivers we should calliommu_paging_domain_alloc().
Quoted 6 lines
__iommu_group_alloc_blocking_domain()is the only place that allocates an BLOCKED domain, so move theops->blocked_domainlogic there.Signed-off-by Jason Gunthorpe <[email protected]>Signed-off-by Vasant Hegde <[email protected]>Reviewed-by Lu Baolu <[email protected]>
Vasant Hegde
maintainerPATCH v4 12/12 iommu: Create __iommu_alloc_identity_domain()
In reply to Vasant HegdeFrom: Jason Gunthorpe <[email protected]>
Consolidate all the code to create an IDENTITY domain into one function. This removes the legacy __iommu_domain_alloc() path from all paths, and preps it for final removal.
BLOCKED/IDENTITY/PAGING are now always allocated via a type specific function.
--- drivers/iommu/iommu.c | 43 +++++++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 14 deletions(-)
drivers/iommu/iommu.c +29 -14
@@ -94,8 +94,6 @@ static const char * const iommu_group_resv_type_string[] = {static int iommu_bus_notifier (struct notifier_block *nb,unsigned long action,void *data);static void iommu_release_device (struct device *dev); -static struct iommu_domain * -__iommu_group_domain_alloc (struct iommu_group *group,unsigned int type);static int __iommu_attach_device (struct iommu_domain *domain,struct device *dev); static int __iommu_attach_group(struct iommu_domain *domain,
@@ -137,6 +135,8 @@ static struct group_device *iommu_group_alloc_device(struct iommu_group *group, struct device *dev);static void __iommu_group_free_device (struct iommu_group *group,struct group_device *grp_dev); +static void iommu_domain_init (struct iommu_domain *domain,unsigned int type, +const struct iommu_ops *ops);#define IOMMU_GROUP_ATTR (_name, _mode, _show, _store) \ struct iommu_group_attribute iommu_group_attr_##_name = \
@@ -1590,6 +1590,28 @@ struct iommu_group *fsl_mc_device_group(struct device *dev) }EXPORT_SYMBOL_GPL (fsl_mc_device_group); +static struct iommu_domain *__iommu_alloc_identity_domain (struct device *dev) +{ +const struct iommu_ops *ops =dev_iommu_ops (dev); +struct iommu_domain *domain; + +if (ops->identity_domain) +return ops->identity_domain; + +/* Older drivers create the identity domain via ops->domain_alloc() */ +if (!ops->domain_alloc) +return ERR_PTR (-EOPNOTSUPP ); + + domain = ops->domain_alloc (IOMMU_DOMAIN_IDENTITY ); +if (IS_ERR (domain)) +return domain; +if (!domain) +return ERR_PTR (-ENOMEM ); + +iommu_domain_init (domain,IOMMU_DOMAIN_IDENTITY , ops); +return domain; +} +static struct iommu_domain *__iommu_group_alloc_default_domain (struct iommu_group *group,int req_type) {
@@ -1617,7 +1639,10 @@ __iommu_group_alloc_default_domain(struct iommu_group *group, int req_type)return dom; } -return __iommu_group_domain_alloc (group, req_type); +if (req_type ==IOMMU_DOMAIN_IDENTITY ) +return __iommu_alloc_identity_domain (dev); + +return ERR_PTR (-EINVAL ); }/*
@@ -1983,9 +2008,7 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops,struct iommu_domain *domain;unsigned int alloc_type = type &IOMMU_DOMAIN_ALLOC_FLAGS ; -if (alloc_type ==IOMMU_DOMAIN_IDENTITY && ops->identity_domain) -return ops->identity_domain; -else if (type & __IOMMU_DOMAIN_PAGING && ops->domain_alloc_paging) +if (type & __IOMMU_DOMAIN_PAGING && ops->domain_alloc_paging) domain = ops->domain_alloc_paging (dev);else if (ops->domain_alloc) domain = ops->domain_alloc (alloc_type);
@@ -2006,14 +2029,6 @@ static struct iommu_domain *__iommu_domain_alloc(const struct iommu_ops *ops,return domain; } -static struct iommu_domain * -__iommu_group_domain_alloc (struct iommu_group *group,unsigned int type) -{ -struct device *dev =iommu_group_first_dev (group); - -return __iommu_domain_alloc (dev_iommu_ops (dev), dev, type); -} -static int __iommu_domain_alloc_dev (struct device *dev,void *data) {const struct iommu_ops **ops = data;
Signature · 1 line
2.31.1
RE: [PATCH v4 12/12] iommu: Create __iommu_alloc_identity_domain()
Quoted 9 lines
From: Vasant Hegde <[email protected]>
Sent: Wednesday, October 23, 2024 6:42 PMFrom: Jason Gunthorpe <[email protected]>
Consolidate all the code to create an IDENTITY domain into one function. This removes the legacy
__iommu_domain_alloc()path from all paths, and preps it for final removal.
Quoted 6 lines
BLOCKED/IDENTITY/PAGING are now always allocated via a type specific function.
Signed-off-by Jason Gunthorpe <[email protected]>Signed-off-by Vasant Hegde <[email protected]>Reviewed-by Lu Baolu <[email protected]>