Skip to contentSkip to conversation

ACPI and APIC on nforce2 with 2.4 kernel - is there hope?

DISCUSSION [email protected] 1 participant 1 message Dec 10, 2004

lore
Share & tools
lore
#0 lore raw

Is there any hope of seeing the acpi_skip_timer_override patch in the 2.4 branch? It has been in the 2.6 branch since around 2.6.5-rcfoo. This patch addresses a problem specific to nforce2 motherboards that results in an XT-PIC timer on ACPI and APIC enabled 2.4.x kernels.

I really don't know how much of a Bad Thing (TM) this is but my anxieties are due to: 1) The fact that I see clock gain of about one minute per week; 2) The fact that nforce2 has suffered from notorious instability and I just want to feel comfort that all known problems are going to get ironed out. I acknowledge that this problem is: 1) a hardware problem; 2) fixed in the latest stable branch (as of the 2.6.6 release).

If the answer to my question is no, I would appreciate guidance on: 1) whether this issue could cause me problems (is it likely to result in clock gain; could it cause general instability or other problems); 2) what people recommend as a 2.4.x kernel configuration for nforce2 motherboards (mine is Abit NF7-S Rev2) in terms of ACPI, IOAPIC and LAPIC parameters.

To demonstrate, with an ACPI and APIC enabled 2.4.26 Debianised kernel, I see:

cat /proc/interrupts
CPU0

  0:    1180749          XT-PIC  timer
  1:       1834    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
  8:          4    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:     234451    IO-APIC-edge  PS/2 Mouse
 14:      20449    IO-APIC-edge  ide0
 15:         23    IO-APIC-edge  ide1
 19:          0   IO-APIC-level  mgacore
 20:    1192269   IO-APIC-level  usb-ohci, eth0
 21:        443   IO-APIC-level  ehci_hcd, NVidia nForce2
 22:          3   IO-APIC-level  ohci1394, usb-ohci
NMI:          0
LOC:    1180732
ERR:          0
MIS:          0

N.B. I understand that the separate issue of the non-availability of IRQ2 because of the spurious reservation by cascade has now been patched, as of 2.4.27-pre2 (and 2.6.6).

See also http://bugzilla.kernel.org/show_bug.cgi?id=1203

Please cc me as I am not subscribed to this list.