supporting DiskOnChip G3
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi there,
Do you have any plans to supporting DOC G3 and/or newer devices in MTD?
Thanks,
Ara
Quoted 1 line · Ara Avanesyan
Do you have any plans to supporting DOC G3 and/or newer devices in MTD?
We have no access to the documentation required.
Signature · 1 line
dwmw2
Quoted 4 lines · David Woodhouse
Quoted 1 line · Ara Avanesyan
Do you have any plans to supporting DOC G3 and/or newer devices in MTD?
We have no access to the documentation required.
"Hello and welcome to 'It's the Mind'. Tonight on 'It's the Mind', we'll be exploring deja vu."
-J.
David,
thanks for the answer.
the documentation is the easiest part;)
http://www.m-systems.com/files/documentation/doc/DOC_G3_512Mb_1Gb_Rev2.0.pdf
so now you have the doc, means you have plans to support it?:)
please advise,
thanks,
Ara
----- Original Message ----- From: "David Woodhouse" <[email protected]>
To: "Ara Avanesyan" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, December 15, 2004 2:03 PM
Subject: Re: supporting DiskOnChip G3
Quoted 9 lines · Ara Avanesyan
Quoted 1 line
Do you have any plans to supporting DOC G3 and/or newer devices in MTD?
We have no access to the documentation required.
Signature · 1 line
dwmw2
Quoted 5 lines · Ara Avanesyan
David,
thanks for the answer.
the documentation is the easiest part;)
http://www.m-systems.com/files/documentation/doc/DOC_G3_512Mb_1Gb_Rev2.0.pdf
Oh, that's interesting. They always used to be very cagey about their documentation. I'm glad to see they're making progress -- at first glance it looks like we ought to be able to support the device with that information.
That would be enough for using YAFFS or JFFS2 on it; if the translation layer isn't INFTL (as I suspect it isn't) then we'd also need docs on the new translation layer too, if we want to use it in DOS-compatible mode.
Quoted 1 line
so now you have the doc, means you have plans to support it?:)
Yeah -- given some sample hardware and a few spare weeks of spare time, I'd be happy to play :)
It shouldn't be _that_ hard to make a driver for it which uses the core NAND code. See the existing drivers/mtd/nand/diskonchip.c for inspiration and turn up on #mtd of irc.freenode.net. If you're willing and capable then we can help you do it -- but if it turns out to be as much work to talk you through it as it would be to do it ourselves, then it's not going to work too well :)
Signature · 1 line
dwmw2
ohh, actually I'm noob in the low level world but in any case I have to do this porting. accidentally, is there any good book/material that explains the mtd structure etc so i won't loose too much time exploring the source code blindly... actually i'm doing it for two days already:)
hey, thanks for a great answer!
Ara
----- Original Message ----- From: "David Woodhouse" <[email protected]>
To: "Ara Avanesyan" <[email protected]>
Cc: <[email protected]>
Sent: Wednesday, December 15, 2004 2:24 PM
Subject: Re: supporting DiskOnChip G3
Quoted 33 lines · Ara Avanesyan
Quoted 5 lines
David,
thanks for the answer.
the documentation is the easiest part;)
http://www.m-systems.com/files/documentation/doc/DOC_G3_512Mb_1Gb_Rev2.0.pdfOh, that's interesting. They always used to be very cagey about their documentation. I'm glad to see they're making progress -- at first glance it looks like we ought to be able to support the device with that information.
That would be enough for using YAFFS or JFFS2 on it; if the translation layer isn't INFTL (as I suspect it isn't) then we'd also need docs on the new translation layer too, if we want to use it in DOS-compatible mode.
Quoted 1 line
so now you have the doc, means you have plans to support it?:)
Yeah -- given some sample hardware and a few spare weeks of spare time, I'd be happy to play :)
It shouldn't be _that_ hard to make a driver for it which uses the core NAND code. See the existing
drivers/mtd/nand/diskonchip.cfor inspiration and turn up on #mtd of irc.freenode.net. If you're willing and capable then we can help you do it -- but if it turns out to be as much work to talk you through it as it would be to do it ourselves, then it's not going to work too well :)Signature · 1 line
dwmw2