lilo boot problems with SATA and mandrake 10.1
Hello!
Please, someone could help me with the following problem:
I have a system with the following specifications:
Intel 865G Chipset
SATA Maxtor 120GB
P4 2.8 Ghz
When I trying to install Mandrake 10.1 on it, it intalls it normally, but when I boot I have only "L" letter instead Lilo Boot Menu, I tried GRUB Bootloader, and get "G" letter instead GRUB Boot Menu
Also I have windows XP on this system to dual boot. After I have installed Fedora Core 3, It works normally, but with mandrake 10.1 official I have problems to boot.
Please anybody have experience with this thing?
Thanks
Vladimir
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · Vladimir E. Rodriguez
Hello!
Please, someone could help me with the following problem:
Quoted 9 lines
I have a system with the following specifications:
Intel 865G Chipset
SATA Maxtor 120GB
P4 2.8 GhzWhen I trying to install Mandrake 10.1 on it, it intalls it normally, but when I boot I have only "L" letter instead Lilo Boot Menu, I tried GRUB Bootloader, and get "G" letter instead GRUB Boot Menu
I would have expected to see a number just after the "L", likes L 01
01 01 01 01
Maybe lilo installed itself at the starting of the partition instead
of at the starting of the disk, and you see the Lilo from the old Redhat installation, or something related. In such case you have to ajust the lilo file (/etc/lilo.conf) to be sure it install itself directly in the boot sector and check the files at the good place, and then type /usr/sbin/lilo -v
Without seeing your lilo file, it is difficult to help more. Perhaps
you can find your problem by reading this document:
http://user.fundy.net/cyclist/linux/troubleshoot-LILO.html
Simon Valiquette
http://www.gulus.org
Quoted 6 lines
Also I have windows XP on this system to dual boot. After I have installed Fedora Core 3, It works normally, but with mandrake 10.1 official I have problems to boot.
Please anybody have experience with this thing?
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 7 lines · Simon Valiquette
Vladimir E. Rodriguez a ?crit :
Quoted 5 lines
Also I have windows XP on this system to dual boot. After I have installed Fedora Core 3, It works normally, but with mandrake 10.1 official I have problems to boot.
Please anybody have experience with this thing?
FWIW, I can't really help; only comment.. I tried setting up
a dual boot machine with WinXP for a neighbour, that was already setup with Win98, 8gB partition and Linux... Never got Win98 replaced with XP but XP managed to completly mess up the Linux partition changing the device numbers.. It took several hours with cfdisk to straighten out the partition table and then re install Win98 for them... NEVER again... Hope you have better luck..
Signature · 7 lines
Hal - in Terra Alta, WV - Slackware GNU/Linux 9.0 (2.4.20-1) . - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 5 lines · Hal MacArgle
Quoted 4 lines · Simon Valiquette
Vladimir E. Rodriguez a ?crit :
Quoted 3 lines
Also I have windows XP on this system to dual boot. After I have installed Fedora Core 3, It works normally, but with mandrake 10.1 official I have problems to boot.
That is normal with Mandrake 10.x. Infact the issue of half ass software is normal from Mandrake. For some reason or another Mandrake ALWAYS leaves our a few critical files. I have experienced this in 8.x, 9.x and 10.x. Different files different times but always something left out or half ass put together.
If you are looking for a corporate type distribution meaning one with the programs that are applicable to small business go to SuSE but you must realize that if you do not configure things their way or want to do something oddball you may have negative issues but if what you want is the best source of included proprietary programs then this should be your choice.
If you can roil your own then there is Gentoo.
If you want somebody else to roil it but open source only then there id Debian and Fedora.
Frank
Quoted 10 lines
Quoted 2 lines
Quoted 2 lines
Please anybody have experience with this thing?
FWIW, I can't really help; only comment.. I tried setting up
a dual boot machine with WinXP for a neighbour, that was already setup with Win98, 8gB partition and Linux... Never got Win98 replaced with XP but XP managed to completly mess up the Linux partition changing the device numbers.. It took several hours with cfdisk to straighten out the partition table and then re install Win98 for them... NEVER again... Hope you have better luck..
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · Vladimir E. Rodriguez
Hello!
Please, someone could help me with the following problem:
Quoted 8 lines
I have a system with the following specifications:
Intel 865G Chipset
SATA Maxtor 120GB
P4 2.8 GhzWhen I trying to install Mandrake 10.1 on it, it intalls it normally, but when I boot I have only "L" letter instead Lilo Boot Menu, I tried GRUB Bootloader, and get "G" letter instead GRUB Boot Menu
Normally when only an "L" is shown at boot time you would also get some error codes, The lilo README normally found in /usr/share/lilo-xx-xx/ directory explanes what the error codes mean.
I found one answer to a simalar problem via www.google.com/linux
http://lists.ssc.com/pipermail/linux-list/2001-March/008203.html
Its an old mail but i think well worth a try.
Use your install medium to boot and mount the disk partition manually,
Quoted 10 lines
Also I have windows XP on this system to dual boot. After I have installed Fedora Core 3, It works normally, but with mandrake 10.1 official I have problems to boot.
Please anybody have experience with this thing?
Thanks
Vladimir
Signature · 13 lines
If the Linux community is a bunch of thieves because they try to imitate windows programs, then the Windows community is built on organized crime. Regards Richard [email protected] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
I had that problem too a long time ago - it would show only a L but no error code. (I didn't try with GRUB.) I have no idea whatsoever of what machine it was, but I do know it had winxp on a dual boot too. I was a mere mortal back then (win user) and believed that on a crash the best thing was to reinstall everything all over again (as all win users believe), so I don't know how to fix it since I used to just blindly overwrite it. I tryed other distributions at the time (as well as different versions of the same one) and this failure occured only on some of them (don't remember which of them).
You could try updating your boot loader and bios to newer versions, but i doubt it will make a difference.
I would imagine that this error happens when we install win on a partition and it's loader on MBR and after try to put LILO/GRUB over win's loader on MBR. Win must have some sort of self-healing mechanism to repair the MBR when it is damaged (or in this case, fully altered). That would explain why no error code is being shown - our boot loader has been partially overwritten by win's loader, and I doubt a damaged LILO/GRUB can do anything at all (such as shout an error).
You should try to reinstall win on a partition and tell it to put it's loader on the begining of the same partition instead of on the MBR. After that you can reinstall LILO/GRUB on the MBR (or perhaps reinstall your distro - your call) and you should be all set. I'm sure I sound like a win user, telling you to reinstall everything, but if I am right, this will be the last time you will have to do that. Good luck!
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs