iptables & tc - 3 marks
Hi....
Help me please!!!
I am using Linux Redhat as router of the my network. I am to making NAT and firewall.
In my iptables script, I need make 3 MARKs for the same packet, as following
# It marks the packets that will go for link ADSL (I have 2 links - adsl 2Mb and 'dedicate link' 256Mb )
# I am using 'ip rule / ip route' to make this
iptables -t mangle -A PREROUTING -p tcp --dport 21 -j MARK --set-mark 2000 iptables -t mangle -A PREROUTING -p tcp --dport 20 -j MARK --set-mark 2000
# It marks the packets that will be shapped ( upload with cbq )
iptables -t mangle -A PREROUTING -m mac 00:11:22:33:44:55 -j MARK --set-mark 501
....
iptables -t mangle -A PREROUTING -m mac aa:bb:cc:dd:ee:ff -j MARK --set-mark 631 ###. I have 130 hosts in my network
# It marks the packages that priority has ( with 'tc prio' command) iptables -t mangle -A PREROUTING -p tcp --dport 22 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p tcp --dport 23 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p udp --dport 27000:27015 -j MARK --set-mark 110
But only last mark does function
Have solution ?? How to do?
#Marcio P. Silva
#linuXuser
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 20 lines · On Tue, 2004-11-30 at 00:12 -0200, [email protected] wrote:
Hi....
Help me please!!!
I am using Linux Redhat as router of the my network. I am to making NAT and firewall.
In my iptables script, I need make 3 MARKs for the same packet, as following
# It marks the packets that will go for link ADSL (I have 2 links - adsl 2Mb and 'dedicate link' 256Mb )
# I am using 'ip rule / ip route' to make this
iptables -t mangle -A PREROUTING -p tcp --dport 21 -j MARK --set-mark 2000 iptables -t mangle -A PREROUTING -p tcp --dport 20 -j MARK --set-mark 2000# It marks the packets that will be shapped ( upload with cbq )
iptables -t mangle -A PREROUTING -m mac 00:11:22:33:44:55 -j MARK --set-mark 501
....
iptables -t mangle -A PREROUTING -m mac aa:bb:cc:dd:ee:ff -j MARK --set-mark 631 ###. I have 130 hosts in my network
Quoted 8 lines
# It marks the packages that priority has ( with 'tc prio' command) iptables -t mangle -A PREROUTING -p tcp --dport 22 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p tcp --dport 23 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p udp --dport 27000:27015 -j MARK --set-mark 110
But only last mark does function
I have just this hour started looking at marking packets, so my information could be wrong, but I believe that --set-mark <n> where n is an integer from 1-255. You cannot use values greater than 255.
b.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
el Diumenge 19 Desembre 2004 20:32, Brian J. Murrell va escriure:
Quoted 33 lines · On Tue, 2004-11-30 at 00:12 -0200, [email protected] wrote:
Quoted 32 lines
Hi....
Help me please!!!
I am using Linux Redhat as router of the my network. I am to making NAT
and firewall.In my iptables script, I need make 3 MARKs for the same packet, as following
# It marks the packets that will go for link ADSL (I have 2 links - adsl
2Mb and 'dedicate link' 256Mb ) # I am using 'ip rule / ip route' to
make this
iptables -t mangle -A PREROUTING -p tcp --dport 21 -j MARK --set-mark 2000 iptables -t mangle -A PREROUTING -p tcp --dport 20 -j MARK --set-mark 2000# It marks the packets that will be shapped ( upload with cbq )
iptables -t mangle -A PREROUTING -m mac 00:11:22:33:44:55 -j MARK --set-mark 501 ....
iptables -t mangle -A PREROUTING -m mac aa:bb:cc:dd:ee:ff -j MARK --set-mark 631 ###. I have 130 hosts in my network# It marks the packages that priority has ( with 'tc prio' command) iptables -t mangle -A PREROUTING -p tcp --dport 22 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p tcp --dport 23 -j MARK --set-mark 100 iptables -t mangle -A PREROUTING -p udp --dport 27000:27015 -j MARK --set-mark 110
Quoted 7 lines
Quoted 1 line
But only last mark does function
I have just this hour started looking at marking packets, so my information could be wrong, but I believe that --set-mark <n> where n is an integer from 1-255. You cannot use values greater than 255.
b.
I'm using values greater than 255, may be you need to install mark modules?
- --
ID 0x834D5708
wget http://www.awacat.com/clausGPG/publica_tictac.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBxvB9LGhud4NNVwgRAuVLAKC5YgJN/0VBy6vA4+d+rqZNyqxIlQCfacf3 Ujp2PjGND7iDf0x6N2VBhyk=QGQ7
-----END PGP SIGNATURE-----
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/