htb bridge problem, please chceck my config
hello. i have following setup:
a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with
2 interfaces (eth0 - to our ISP, eth1 - to our network)
machine does not have any IP
there is a 802.1q vlan eth0.2
eth0.2 and eth1 are bridged in br0
i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit
all our IP addresses are public and we have the following setup
/sbin/tc qdisc add dev eth1 root handle 1: htb default 2 /sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 4mbit ceil 4mbit /sbin/tc class add dev eth1 parent 1:1 classid 1:2 htb rate 3mbit ceil 3mbit /sbin/tc class add dev eth1 parent 1:1 classid 1:3 htb rate 1mbit ceil 1mbit /sbin/tc filter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip src FRIEDNS_IP flowid 1:3/sbin/tc filter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip src MY_IP flowid 1:2
/sbin/tc qdisc add dev eth0.2 root handle 1: htb default 2 /sbin/tc class add dev eth0.2 parent 1: classid 1:1 htb rate 4mbit ceil 4mbit /sbin/tc class add dev eth0.2 parent 1:1 classid 1:2 htb rate 3mbit ceil 3mbit /sbin/tc class add dev eth0.2 parent 1:1 classid 1:3 htb rate 1mbit ceil 1mbit /sbin/tc filter add dev eth0.2 protocol ip parent 1:0 pref 1 u32 match ip dst FRIENDS_IP flowid 1:3/sbin/tc filter add dev eth0.2 protocol ip parent 1:0 pref 1 u32 match ip dst MY_IP flowid 1:3
but it doesnt work well, my ISP link is stable, but i hardly ever get from my shaped link more 2mbit. where am i making mistake?
Thanks. Matis
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 35 lines · On Saturday 01 January 2005 10:45, [email protected] wrote:
hello. i have following setup:
a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with
2 interfaces (eth0 - to our ISP, eth1 - to our network)
machine does not have any IPthere is a 802.1q vlan eth0.2
eth0.2 and eth1 are bridged in br0i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit
all our IP addresses are public and we have the following setup
/sbin/tcqdisc add dev eth1 root handle 1: htb default 2/sbin/tcclass add dev eth1 parent 1: classid 1:1 htb rate 4mbit ceil 4mbit/sbin/tcclass add dev eth1 parent 1:1 classid 1:2 htb rate 3mbit ceil 3mbit/sbin/tcclass add dev eth1 parent 1:1 classid 1:3 htb rate 1mbit ceil 1mbit/sbin/tcfilter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip srcFRIEDNS_IPflowid 1:3/sbin/tcfilter add dev eth1 protocol ip parent 1:0 pref 1 u32 match ip srcMY_IPflowid 1:2
/sbin/tcqdisc add dev eth0.2 root handle 1: htb default 2/sbin/tcclass add dev eth0.2 parent 1: classid 1:1 htb rate 4mbit ceil 4mbit/sbin/tcclass add dev eth0.2 parent 1:1 classid 1:2 htb rate 3mbit ceil 3mbit/sbin/tcclass add dev eth0.2 parent 1:1 classid 1:3 htb rate 1mbit ceil 1mbit/sbin/tcfilter add dev eth0.2 protocol ip parent 1:0 pref 1 u32 match ip dstFRIENDS_IPflowid 1:3/sbin/tcfilter add dev eth0.2 protocol ip parent 1:0 pref 1 u32 match ip dstMY_IPflowid 1:3
Quoted 2 lines
but it doesnt work well, my ISP link is stable, but i hardly ever get from my shaped link more 2mbit. where am i making mistake?
Some stuff to check out:
- are the tc stats changing?
- try ceil 3.5mbit so _you_ are the bottleneck
- I'm not sure if you can shape on a vlan
Oh, your filters are ok.
Stef
Signature · 6 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/