IBM Bluetooth PC Card II

Bluez-users Markus Uhr 2 participants 2 messages Jan 1, 2005 Bluetooth drivers

Share & tools

Markus Uhr

author

2005-01-01 14:21 UTC #0 lore raw

Hello

In http://www.holtmann.org/linux/bluetooth/devices.html the IBM Bluetooth PC Card II is reported to work with the hci_uart driver. However, when I insert to card into my computer I get these Log-Messages:

Jan  1 14:06:08 [cardmgr] socket 0: IBM Bluetooth PC Card II
Jan  1 14:06:08 [cardmgr] executing: 'modprobe serial_cs'
Jan  1 14:06:08 [cardmgr] get dev info on socket 0 failed: No such
device
Jan  1 14:06:08 [kernel] serial_cs: no usable port range found, giving
up
Jan  1 14:06:08 [kernel] serial_cs: RequestIO: No more items

So, has anybody an idea what could be wrong that the PCMCIA subsystem doesn't initialize the card properly? Do I need to pass some special parameters?

My config entry in /etc/pcmcia/bluetooth.conf for the card:

card "IBM Bluetooth PC Card II"
version "IBM", "Bluetooth PC Card II", "", ""
bind "serial_cs" class "bluetooth"

Is anything wrong with that?

Markus Uhr

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2005-01-01 18:49 UTC #1 lore raw

Hi Markus,

Quoted 17 lines

In http://www.holtmann.org/linux/bluetooth/devices.html the IBM Bluetooth PC Card II is reported to work with the hci_uart driver. However, when I insert to card into my computer I get these Log-Messages:
Jan  1 14:06:08 [cardmgr] socket 0: IBM Bluetooth PC Card II
Jan  1 14:06:08 [cardmgr] executing: 'modprobe serial_cs'
Jan  1 14:06:08 [cardmgr] get dev info on socket 0 failed: No such
device
Jan  1 14:06:08 [kernel] serial_cs: no usable port range found, giving
up
Jan  1 14:06:08 [kernel] serial_cs: RequestIO: No more items
So, has anybody an idea what could be wrong that the PCMCIA subsystem doesn't initialize the card properly? Do I need to pass some special parameters?

Quoted 7 lines

My config entry in /etc/pcmcia/bluetooth.conf for the card:
card "IBM Bluetooth PC Card II"
version "IBM", "Bluetooth PC Card II", "", ""
bind "serial_cs" class "bluetooth"
Is anything wrong with that?

what kernel version is this?

Regards

Marcel