Swsusp hanging the second time
Hi,
there's a second, more serious problem with this laptop. It hangs the in the second swsusp cycle on suspension.
As before 2.6.10, i386/UP/no highmem.
On the screen I get the two messages "radeonfb resumed!" and "setting latency" superimposed and it hangs forever. This is a regression the previous user commented: "It worked under 2.6.6"
Regards
Oliver
Hi!
Quoted 6 lines
there's a second, more serious problem with this laptop. It hangs the in the second swsusp cycle on suspension.
As before 2.6.10, i386/UP/no highmem.
On the screen I get the two messages "radeonfb resumed!" and "setting latency" superimposed and it hangs forever. This is a regression the previous user commented: "It worked under 2.6.6"
Unless it was on the same hardware/config, I'd not call it regression.
Anyway two suspends in the row seem to work here on 2.6.10+my patches. I suspect you have problems with some more obscure driver.
Can you try going with minimal driver config to see if it is reproducible? If it is broken even with minimal drivers, I'll try harder to reproduce it here (but I believe it will just go away).
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
Am Dienstag, 4. Januar 2005 12:08 schrieb Pavel Machek:
Quoted 2 lines
Anyway two suspends in the row seem to work here on 2.6.10+my patches. I suspect you have problems with some more obscure driver.
It seems so. A minimalist config will allow the system to survive. I'll try to find the driver responsible.
Regards
Oliver
Am Dienstag, 4. Januar 2005 12:08 schrieb Pavel Machek:
Quoted 9 lines
Hi!
Quoted 6 lines
there's a second, more serious problem with this laptop. It hangs the in the second swsusp cycle on suspension.
As before 2.6.10, i386/UP/no highmem.
On the screen I get the two messages "radeonfb resumed!" and "setting latency" superimposed and it hangs forever. This is a regression the previous user commented: "It worked under 2.6.6"
Quoted 8 lines
Unless it was on the same hardware/config, I'd not call it regression.
Anyway two suspends in the row seem to work here on 2.6.10+my patches. I suspect you have problems with some more obscure driver.
Can you try going with minimal driver config to see if it is reproducible? If it is broken even with minimal drivers, I'll try harder to reproduce it here (but I believe it will just go away).
The culprit seems to be EHCI, possibly together with UHCI only.
0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1200 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1220 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1240 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0
Memory at f4000000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
Regards
Oliver
Hi.
That makes perfect sense: If you get a hang the second time, it's generally because something loaded during the first resume didn't handle the suspend properly, and is in a 'bad' state now. USB and DRI are the main sources of those issues at the moment. The solution would be to stop usb and unload the drivers prior to suspending, and reload/restart afterwards. I do this with my USB mouse (having switched to a text console) with no ill effects. YMMV.
Regards,
Nigel
Quoted 49 lines · Oliver Neukum
Am Dienstag, 4. Januar 2005 12:08 schrieb Pavel Machek:
Quoted 9 lines
Hi!
Quoted 6 lines
there's a second, more serious problem with this laptop. It hangs the in the second swsusp cycle on suspension.
As before 2.6.10, i386/UP/no highmem.
On the screen I get the two messages "radeonfb resumed!" and "setting latency" superimposed and it hangs forever. This is a regression the previous user commented: "It worked under 2.6.6"Quoted 8 lines
Unless it was on the same hardware/config, I'd not call it regression.
Anyway two suspends in the row seem to work here on 2.6.10+my patches. I suspect you have problems with some more obscure driver.
Can you try going with minimal driver config to see if it is reproducible? If it is broken even with minimal drivers, I'll try harder to reproduce it here (but I believe it will just go away).
The culprit seems to be EHCI, possibly together with UHCI only.
0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1200 [size=32]0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1220 [size=32]0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1240 [size=32]0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems: Unknown device ff10
Flags: bus master, medium devsel, latency 0
Memory atf4000000(32-bit, non-prefetchable)
Capabilities: <available only to root>Regards
Oliver
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 5 lines
Nigel Cunningham Software Engineer, Canberra, Australia http://www.cyclades.com Ph: +61 (2) 6292 8028 Mob: +61 (417) 100 574