Determing the pfifo backlog
Greetings --
in the "Linux Advanced Routing & Traffic Control HOWTO" chapter 14.1 on bfifo/pfifo it says that:
"you can use this qdisc to determine the backlog on your interface". But it does not say exactly how.
Command [#tc -s qdisc ls] outputs the number of packets sent so far but it does not output any info about the backlog.
My first question is whether a command exists that provides info about the backlog.
My second question is whether a system call exists that provides this info. I would like to be able to query on the backlog at real time and invoking the shell on each such query sounds like a lot of overhead.
Kind regards,
Yannis
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines
My first question is whether a command exists that provides info about the backlog.
My second question is whether a system call exists that provides this info. I would like to be able to query on the backlog at real time and invoking the shell on each such query sounds like a lot of overhead.
If you can compile a modified kernel, you can have real time access to the red qdisc backlog by using the soft at http://www.rawsoft.org
I also think that real time info on the queues are very important and should be accessible in an easier way.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/