Help! HDSP firmware suddenly fails to load...
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 17 lines · Fernando Lopez-Lezcano
Quoted 16 lines · Michael E. Smith
[MUNCH]
Both machines refuse to load the firmware similarly, but not quite the same. To wit, the laptop (cardbus/digiface) consistantly produces the above error, while the desktop (pci/digiface) does it once and then doesn't see a card at all.It does, however, show up (on both machines) on an lspci listing. Also, snd-hdsp shows up in lsmod.
dmesg snippet:
ALSA
/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:647:
Hammerfall-DSP: no Digiface or Multiface connected!
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:5086:
card initialization pending : waiting for firmware
Quoted 4 lines
Quoted 4 lines
It would appear as though the firmware is attempting to be loaded automatically at some point during user login (I can see from the lights on the digiface), resulting in the error even before I attempt to load it using hdsploader.
[MUNCH]
Quoted 5 lines
I think it is alsa 1.0.8. From what I've read it has changed the way in which it loads (surprise!) firmware. It now uses the hotplug subsystem. Darn!. I thought it was working fine as some people have reported success with echoaudio cards (which now have a driver included in 1.0.8 and also require firmware downloads). Apparently not.
Did you manage to do more tests? And/or get more information from dmesg or /var/log/messages regarding the firmware load?
I just installed a 9652 + DigiFace on a test machine and while I had some problems the firmware was loaded and eventually the card worked fine. This is, regretfully, on fc3 so there may be problems that are specific to fc2 then.
On the first try after a reboot the card, for some reason, does not come up. I suspect a problem with udev... this is what I find in /var/log/messages on that first try:
=====
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:E9:46:F5
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
hm: ioapic cache empty for irq 17 (e:00000000/d:00010000) 0001a9b1
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:662: loading firmware
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:700: finished firmware loading ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card. ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.8/acore/control.c:322: control
3:0:0:IEC958 Playback Default:0 is already present
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4879: Error creating ctl interface RME Hammerfall DSP: probe of 0000:00:09.0 failed with error -16
=====
And then if I restart the alsa subsystem through the alsasound scripts I get this:
=====
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
=====
And after that the card works fine.
I only tried twice.
I'll see if I can test on fc2...
-- Fernando
Hi, Fernando,
Holy cow you're on top of things. Do you ever sleep?
In any case, I've rebooting into 2.6.10-2.1.ll.rhfc2.ccrma on the laptop (cardbus/digiface) and the /var/log/messages showed the same as my previous dmesg snippet.
FWIW, the error light on the digiface went out by the time the login screen popped up, when before (the first time with 1.0.8) it went out after logging in, presumably as part of the login.
On your cue, I restarted alsa (service alsasound restart ???) and got the following in /var/log/messages:
====
Jan 26 06:46:07 localhost alsasound: sound driver stop succeeded Jan 26 06:46:08 localhost alsasound: Starting sound driver snd-hdsp succeeded Jan 26 06:46:08 localhost alsasound: Starting sound driver snd-via82xx succeeded Jan 26 06:46:08 localhost alsasound: Starting sequencer succeeded Jan 26 06:46:08 localhost alsactl: /usr/sbin/alsactl: set_control:909: failed to obtain info for control #1 (No such file or directory) Jan 26 06:46:08 localhost alsasound: Restoring sound driver settings
failed
====
Hmmm. So, like all good little boys, I did it again, just for good measure and:
====
Jan 26 06:49:37 localhost alsasound: sound driver stop succeeded Jan 26 06:49:44 localhost kernel: ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5 Jan 26 06:49:46 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Jan 26 06:49:46 localhost kernel: ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card. Jan 26 06:49:46 localhost alsasound: Starting sound driver snd-hdsp succeeded Jan 26 06:49:46 localhost alsasound: Starting sound driver snd-via82xx succeeded Jan 26 06:49:47 localhost alsasound: Starting sequencer succeeded Jan 26 06:49:47 localhost alsasound: Starting sequencer driver snd-seq-midi succeeded Jan 26 06:49:47 localhost alsasound: Restoring sound driver settings
succeeded
====
Hey! Lookie here!
If I'm to believe what I see, the firmware has perhaps been loaded all along, just the card had not been initialized, whatever that means.
Oh crap, I just realized that I never powered down the digiface between reboots. I suppose I should try that, too.
Anyway, Jack seems to be running happily after the second alsasound restart. Haven't checked hdspmixer, hdspconf, or tried sound through it yet, however. That remains to be a pain with the laptop, largely due to my crappy Ene cardbus controller's memory handling which I have to manually manipulate (if you're reading this, Ico, I never did thank you for the fix. Thanks!).
I will now (or at least later today) try all this again with 1) reycling the digiface's power 2) fully testing with sound 3) with the desktop (pci/digiface) and 4) with the other various kernels.
Whew.
Thanks again,
Michael
Quoted 70 lines · Fernando Lopez-Lezcano
Quoted 17 lines · Fernando Lopez-Lezcano
Quoted 16 lines · Michael E. Smith
[MUNCH]
Both machines refuse to load the firmware similarly, but not quite the same. To wit, the laptop (cardbus/digiface) consistantly produces the above error, while the desktop (pci/digiface) does it once and then doesn't see a card at all.It does, however, show up (on both machines) on an lspci listing. Also, snd-hdsp shows up in lsmod.
dmesg snippet:
ALSA
/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:647:
Hammerfall-DSP: no Digiface or Multiface connected!
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:5086:
card initialization pending : waiting for firmwareQuoted 4 lines
Quoted 4 lines
It would appear as though the firmware is attempting to be loaded automatically at some point during user login (I can see from the lights on the digiface), resulting in the error even before I attempt to load it using hdsploader.
[MUNCH]
Quoted 5 lines
I think it is alsa 1.0.8. From what I've read it has changed the way in which it loads (surprise!) firmware. It now uses the hotplug subsystem. Darn!. I thought it was working fine as some people have reported success with echoaudio cards (which now have a driver included in 1.0.8 and also require firmware downloads). Apparently not.
Did you manage to do more tests? And/or get more information from dmesg or
/var/log/messagesregarding the firmware load?I just installed a 9652 + DigiFace on a test machine and while I had some problems the firmware was loaded and eventually the card worked fine. This is, regretfully, on fc3 so there may be problems that are specific to fc2 then.
On the first try after a reboot the card, for some reason, does not come up. I suspect a problem with udev... this is what I find in
/var/log/messageson that first try:=====
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:E9:46:F5
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
hm: ioapic cache empty for irq 17 (e:00000000/d:00010000)0001a9b1
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:662: loading firmware
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:700: finished firmware loading ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card. ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/acore/control.c:322: control
3:0:0:IEC958 Playback Default:0 is already present
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4879: Error creating ctl interface RME Hammerfall DSP: probe of 0000:00:09.0 failed with error -16
=====And then if I restart the alsa subsystem through the alsasound scripts I get this:
=====
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
=====
Quoted 7 lines
And after that the card works fine.
I only tried twice.
I'll see if I can test on fc2...-- Fernando
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
At 25 Jan 2005 17:31:30 -0800,
Quoted 51 lines · Fernando Lopez-Lezcano
Quoted 17 lines · Fernando Lopez-Lezcano
Quoted 16 lines · Michael E. Smith
[MUNCH]
Both machines refuse to load the firmware similarly, but not quite the same. To wit, the laptop (cardbus/digiface) consistantly produces the above error, while the desktop (pci/digiface) does it once and then doesn't see a card at all.It does, however, show up (on both machines) on an lspci listing. Also, snd-hdsp shows up in lsmod.
dmesg snippet:
ALSA
/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:647:
Hammerfall-DSP: no Digiface or Multiface connected!
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/alsa-kernel/pci/rme9652/hdsp.c:5086:
card initialization pending : waiting for firmwareQuoted 4 lines
Quoted 4 lines
It would appear as though the firmware is attempting to be loaded automatically at some point during user login (I can see from the lights on the digiface), resulting in the error even before I attempt to load it using hdsploader.
[MUNCH]
Quoted 5 lines
I think it is alsa 1.0.8. From what I've read it has changed the way in which it loads (surprise!) firmware. It now uses the hotplug subsystem. Darn!. I thought it was working fine as some people have reported success with echoaudio cards (which now have a driver included in 1.0.8 and also require firmware downloads). Apparently not.
Did you manage to do more tests? And/or get more information from dmesg or
/var/log/messagesregarding the firmware load?I just installed a 9652 + DigiFace on a test machine and while I had some problems the firmware was loaded and eventually the card worked fine. This is, regretfully, on fc3 so there may be problems that are specific to fc2 then.
On the first try after a reboot the card, for some reason, does not come up. I suspect a problem with udev... this is what I find in
/var/log/messageson that first try:=====
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:E9:46:F5
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
hm: ioapic cache empty for irq 17 (e:00000000/d:00010000)0001a9b1
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:662: loading firmware ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:700: finished firmware loading
Quoted 8 lines
ALSA
/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5110: Firmware already loaded, initializing card. ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/acore/control.c:322: control
3:0:0:IEC958 Playback Default:0 is already present
ALSA/usr/src/rpm/BUILD/alsa-driver-1.0.8/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4879: Error creating ctl interface RME Hammerfall DSP: probe of 0000:00:09.0 failed with error -16
=====
Could you try the attached patch?
Takashi
Index: alsa-kernel/pci/rme9652/hdsp.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/rme9652/hdsp.c,v retrieving revision 1.81
pci/rme9652/hdsp.c +11 -10
@@ -4974,15 +4974,7 @@if ((err =snd_hdsp_load_firmware_from_cache (hdsp)) <0 )return err; - -if (!(hdsp->state & HDSP_InitializationComplete)) { -snd_hdsp_initialize_channels (hdsp); -snd_hdsp_initialize_midi_flush (hdsp); -if ((err =snd_hdsp_create_alsa_devices (hdsp->card, hdsp)) <0 ) { -snd_printk ("error creating alsa devices\n" ); -return err; - } - } + return 0; }#endif
@@ -5082,12 +5074,19 @@ }if (!is_9652 && !is_9632 &&hdsp_check_for_iobox (hdsp)) { +#ifdef HDSP_FW_LOADER +if ((err =hdsp_request_fw_loader (hdsp)) <0 ) { +snd_printk (KERN_ERR "hdsp: can't load firmware\n" ); +return err; + } +#else /* no iobox connected, we defer initialization */ snd_printk ("card initialization pending : waiting for firmware\n" );if ((err =snd_hdsp_create_hwdep (card, hdsp)) <0 ) {return err; }return 0 ; +#endif }if ((err =snd_hdsp_enable_io (hdsp)) !=0 ) {
@@ -5096,8 +5095,10 @@if ((hdsp_read (hdsp, HDSP_statusRegister) & HDSP_DllError) !=0 ) {#ifdef HDSP_FW_LOADER -if ((err =hdsp_request_fw_loader (hdsp)) <0 ) +if ((err =hdsp_request_fw_loader (hdsp)) <0 ) { +snd_printk (KERN_ERR "hdsp: can't load firmware\n" );return err; + }#else snd_printk ("card initialization pending : waiting for firmware\n" );if ((err =snd_hdsp_create_hwdep (card, hdsp)) <0 ) {