'no bus device link' error with usb hard drive

DISCUSSION Bjorn Elfstrom 2 participants 2 messages Feb 8, 2005

Share & tools

Bjorn Elfstrom

author

2005-02-08 18:21 UTC #0 lore raw

Hello,

I spotted an error message in the /var/log/messages when I was looking for clues how to change a USB disk fstab-sync properties (permissions and mount point). The message concluded with a request to report it to this list.

Here are the hopefully relevant lines:

-----------------------------------------------------------------

Feb  8 20:09:19 localhost kernel: usb 1-6: new high speed USB device 
using address 13
Feb  8 20:09:19 localhost kernel: scsi11 : SCSI emulation for USB Mass 
Storage devices
Feb  8 20:09:24 localhost wait_for_sysfs[14575]: either wait_for_sysfs

(udev 039) needs an update to handle the device '/devices/pci0000:00/0000:00:0a.3/usb1/1-6/1-6:1.0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>

Feb  8 20:09:31 localhost kernel:   Vendor: SAMSUNG   Model: SP1604N 
        Rev:  0 0
Feb  8 20:09:31 localhost kernel:   Type:   Direct-Access 
        ANSI SCSI revision: 02
Feb  8 20:09:31 localhost kernel: SCSI device sda: 312581808 512-byte 
hdwr sectors (160042 MB)
Feb  8 20:09:31 localhost kernel: sda: assuming drive cache: write through
Feb  8 20:09:31 localhost kernel:  sda: sda1
Feb  8 20:09:31 localhost kernel: Attached scsi disk sda at scsi11, 
channel 0, id 0, lun 0
Feb  8 20:09:32 localhost scsi.agent[14628]: disk at 
/devices/pci0000:00/0000:00:0a.3/usb1/1-6/1-6:1.0/host11/11:0:0:0
Feb  8 20:09:35 localhost fstab-sync[14705]: added mount point

/media/usbdisk1 for /dev/sda1
----------------------------------------------------------

Regards,

.björn

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

Kay Sievers

2005-02-08 19:21 UTC #1 lore raw

Quoted 6 lines · Bjorn Elfstrom

Hello,
I spotted an error message in the /var/log/messages when I was looking for clues how to change a USB disk fstab-sync properties (permissions and mount point). The message concluded with a request to report it to this list.

You may update to a later version of udev which will not print this, or if possible get a 2.6.10 kernel which should not cause this problem.

Kay