hciattach problem

Bluez-devel Andreas Millinger 2 participants 2 messages Feb 10, 2005 Bluetooth drivers

lore

Share & tools

lore

Andreas Millinger

author

2005-02-10 19:08 UTC #0 lore raw

Hello Marcel,

Quoted 4 lines

actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be sure that the latest testing kernel before the final 2.6.11 has no problems with it. So grab 2.6.11-rc3-bk3 and test it please.

I now have tested with 2.6.11-rc3-bk3 and the freez is back. The last message in /var/log/messages is:

Feb 10 19:38:59 tuxlaptop exiting on signal 15

The messages at shutdown are:

Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1 cardmgr[3595]: exiting: ./serial stop ttyS16 2>&1 cardmgr[3595]: +/dev/ttyS16:

The system hangs at this point. Only a power off does help. It seams, that there have been changes in PCMCIA or serial, because the messages with 2.6.10-mh3 look different. When I dont attach the card with hciattach the system shuts down, but there's also a error. The last message in the log is also "exiting on signal 15".

Best regards
Andreas

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Marcel Holtmann

maintainer

2005-02-10 19:17 UTC #1 lore raw

Hi Andreas,

Quoted 14 lines

Quoted 4 lines
actually I asked you to test 2.6.11-rc3 and not the -mh3. I want to be sure that the latest testing kernel before the final 2.6.11 has no problems with it. So grab 2.6.11-rc3-bk3 and test it please.
I now have tested with 2.6.11-rc3-bk3 and the freez is back. The last message in /var/log/messages is:
Feb 10 19:38:59 tuxlaptop exiting on signal 15
The messages at shutdown are:
Shuting down PCMCIA cardmgr [3595]: check cmd exited with status 1 cardmgr[3595]: exiting: ./serial stop ttyS16 2>&1 cardmgr[3595]: +/dev/ttyS16:

Quoted 5 lines

The system hangs at this point. Only a power off does help. It seams, that there have been changes in PCMCIA or serial, because the messages with 2.6.10-mh3 look different. When I dont attach the card with hciattach the system shuts down, but there's also a error. The last message in the log is also "exiting on signal 15".

please try 2.6.11-rc3-bk7 and what does "modinfo bluetooth" say?

Regards

Marcel