looking for help with scomc/scomd registers on 970

Not strictly linux related, but I thought someone might know the answer.

I've got a request from someone that wants to be able to flush the L2 on the 970.

The user manual has a procedure to do this, but it involves first flipping the cache to direct-mapped mode by setting SCOM register 0x43000 bit 0x8000. The only thing is, I can't find any linux code that ever touches the SCOM stuff, and the manual has no examples of *reading* from the SCOM area, just writing to it, so I'm not entirely sure how to do that.

A google search found the following snippet of darwin code:

lis r8,cFIR ; Get the Core FIR register address ori r8,r8,0x8000 ; Set to read data
sync
mtspr scomc,r8 ; Request the Core FIR
mfspr r25,scomd ; Get the source
mfspr r8,scomc ; Get back the status (we just ignore it) sync
isync

This implies that bit 0x8000 needs to be set to specify a read command, and that we need to read the status after the read. Does anyone know if this is in fact the case?

Also, in that code they make reference to early chip revisions that returned scom reads shifted by one bit. Does anyone know which versions are affected?

Thanks,

Chris

I think so. Also, there are some erratas with early 970's where the stuff is shifted one bit. The Darwin source is a good reference for that.

I think all non-FX.

Ben.