Skip to contentSkip to conversation

Bluetooth Device(Headset(Audio)+Data transfer) for a Linux PC

Bluez-users Benjamin Vasanthakumar J 2 participants 2 messages Feb 26, 2005 – Feb 28, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Dear all,

We are planning for a single bluetooth device(microcontroller based) featuring a headset and our custom hardware device which sends status to the PC and gets control information over bluetooth. We plan to use a Bluetooth SoC with Headset Profile interfaced to the microcontroller over UART which fetches the status/control data from our custom hardware.

On the PC side(linux) we are going to use a standard USB Bluetooth dongle. We are using the Bluez on the Linux PC side.

i) We need to send audio information(playing song using some MP3 player) from PC to the bluetooth device headset and also send data from Mic to the PC for voice recording.

What setup we need to make for audio configuration in Linux PC to route the audio information to the headset and a voice recording setup?

ii) Parallely we want to recieve the status info from the bluetooth device and need to send the appropriate control information from PC. We have tested data transfer between 2 PCs using BT USB dongles at L2CAP level. But our final target is we need to implement in firware on our Microcontroller.

Is there a firmware level implementation of Bluez available?

Please advice.

Thanks & Regards,
Benny

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi Benny,

Quoted 10 lines

We are planning for a single bluetooth device(microcontroller based) featuring a headset and our custom hardware device which sends status to the PC and gets control information over bluetooth. We plan to use a Bluetooth SoC with Headset Profile interfaced to the microcontroller over UART which fetches the status/control data from our custom hardware.

On the PC side(linux) we are going to use a standard USB Bluetooth dongle. We are using the Bluez on the Linux PC side.

Quoted 7 lines

i) We need to send audio information(playing song using some MP3 player) from PC to the bluetooth device headset and also send data from Mic to the PC for voice recording.

What setup we need to make for audio configuration in Linux PC to route the audio information to the headset and a voice recording setup?

look at the information at bluetooth-alsa.sf.net

Quoted 7 lines

ii) Parallely we want to recieve the status info from the bluetooth device and need to send the appropriate control information from PC. We have tested data transfer between 2 PCs using BT USB dongles at L2CAP level. But our final target is we need to implement in firware on our Microcontroller.

Is there a firmware level implementation of Bluez available?

No and we don't have any plans for it, until the firmware of your Microcontroller is Linux based.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users