Skip to contentSkip to conversation

nic wount work with 10baseT-FD

DISCUSSION Thorsten Alge 1 participant 1 message Mar 17, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

we have some problems with some of our servers. We have pcchips motherboard with sis900 nics. the problem is, they are standardly set to autonegociate and will work with 10mbps half-duplex but we do need 10mbps full-duplex.
we can set it to 10baseT-FD with "mii-tool" or "ethtool" but after link-loss the will do autonegociate to 10baseT-HD again. we cant ever change this by hand on a few hundred computers. Is there any way to configure this on our debian machines by an option
in /etc/network/interfaces (/etc/sysconfig/network/ifcfg-eth0 on suse) or the sis900 module option? I tried the opt. "media 10baseT-FD" but that wount work.
on our suse linux boxes it is more difficult. some of these haves a 2.6 kernel and there mii-tool or ethtool wount work too!
has anywone experience with running a

        debian linux / 2.4.28 kernel
        suse linux 9.0 / 2.4.. kernel
        suse linux 9.1 / 2.6.. kernel

and a static configuration for sis900 on 10mbps and full-duplex (10baseT-FD)?
if anyone could help, it would be very nice if you could give me a hint how to solve this problem - maybe it ist very easy to configure?

Kind regards,

Thorsten

                                  ,,,,,
                                 ( o ~ )

~~~~~~~~~~~~~~~~~~~~~~~~~~~~.oooO~~(_)~~Oooo.~~~

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs