bug
HI
I did update my kernel on my gentoo laptop, when I plug my PCMCIA eth card I am getting following message:
cardmgr[6952]: socket 1: D-Link DMF560TX Ethernet/Modem
Mar 23 11:36:17 rachel cs: memory probe 0xa0000000-0xa0ffffff: clean. Mar 23 11:36:17 rachel cardmgr[6952]: executing: 'modprobe pcnet_cs' Mar 23 11:36:17 rachel cardmgr[6952]: executing: 'modprobe serial_cs' Mar 23 11:36:17 rachel cardmgr[6952]: executing: './network start eth0' Mar 23 11:36:17 rachel eth0: NE2000 (DL10019 rev 05): io 0x300, irq 11, hw_addr 00:E0:98:8E:40:6D Mar 23 11:36:17 rachel ttyS1 at I/O 0x2f8 (irq = 11) is a 16550A Mar 23 11:36:17 rachel wait_for_sysfs[10476]: error: unknown bus, please report to <[email protected]> 'pcmcia' Mar 23 11:36:17 rachel wait_for_sysfs[10476]: either wait_for_sysfs
(udev 045) needs an update to handle the device '/devices/pci0000:00/0000:00:1e.0/0000:02:0f.1/1.0' properly (unknown bus) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
Mar 23 11:36:17 rachel wait_for_sysfs[10483]: error: unknown bus, please report to <[email protected]> 'pcmcia' Mar 23 11:36:17 rachel wait_for_sysfs[10493]: error: unknown bus, please report to <[email protected]> 'pcmcia' Mar 23 11:36:17 rachel wait_for_sysfs[10493]: either wait_for_sysfs
(udev 045) needs an update to handle the device '/devices/pci0000:00/0000:00:1e.0/0000:02:0f.1/1.1' properly (unknown bus) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
Mar 23 11:36:20 rachel irq 11: nobody cared! Mar 23 11:36:20 rachel [<c0133c3a>] __report_bad_irq+0x2a/0xa0 Mar 23 11:36:20 rachel [<c0133560>] handle_IRQ_event+0x30/0x70 Mar 23 11:36:20 rachel [<c0133d40>] note_interrupt+0x70/0xb0 Mar 23 11:36:20 rachel [<c01336e5>] __do_IRQ+0x145/0x160 Mar 23 11:36:20 rachel [<c0104da3>] do_IRQ+0x23/0x40 Mar 23 11:36:20 rachel [<c010331e>] common_interrupt+0x1a/0x20 Mar 23 11:36:20 rachel [<c011c46e>] __do_softirq+0x2e/0x90 Mar 23 11:36:20 rachel [<c011c4f6>] do_softirq+0x26/0x30 Mar 23 11:36:20 rachel [<c011c5c5>] irq_exit+0x35/0x40 Mar 23 11:36:20 rachel [<c0104da8>] do_IRQ+0x28/0x40 Mar 23 11:36:20 rachel [<c010331e>] common_interrupt+0x1a/0x20 Mar 23 11:36:20 rachel handlers: Mar 23 11:36:20 rachel [<e0c87e00>] (usb_hcd_irq+0x0/0x70 [usbcore]) Mar 23 11:36:20 rachel [<e0eea8a0>] (yenta_interrupt+0x0/0x40 [yenta_socket]) Mar 23 11:36:20 rachel [<e0eea8a0>] (yenta_interrupt+0x0/0x40 [yenta_socket]) Mar 23 11:36:20 rachel [<e10116e0>] (ei_irq_wrapper+0x0/0x40 [pcnet_cs]) Mar 23 11:36:20 rachel Disabling IRQ #11 Mar 23 11:36:20 rachel eth0: found link beat Mar 23 11:36:20 rachel eth0: autonegotiation complete: 100baseT-FD selected Mar 23 11:36:20 rachel cardmgr[6952]: + * WARNING: "net.eth0" has already been started. Mar 23 11:36:20 rachel rc-scripts: WARNING: "net.eth0" has already been
started.
so, I am writing to that email, do you want me to send more info ?
j.
Quoted 7 lines · Jan Boros
I did update my kernel on my gentoo laptop, when I plug my PCMCIA eth card I am getting following message:
Mar 23 11:36:17 rachel wait_for_sysfs[10476]: error: unknown bus, please report to <[email protected]> 'pcmcia' Mar 23 11:36:17 rachel wait_for_sysfs[10476]: either wait_for_sysfs(udev 045) needs an update to handle the device
You may update your udev version to get rid of these messages.
Quoted 2 lines
Mar 23 11:36:20 rachel irq 11: nobody cared! Mar 23 11:36:20 rachel [<c0133c3a>] __report_bad_irq+0x2a/0xa0
Which kernel version is it?
Which network driver do you load?
Kay
-------------------------------------------------------
This SF.net email is sponsored by: 2005 Windows Mobile Application Contest Submit applications for Windows Mobile(tm)-based Pocket PCs or Smartphones for the chance to win $25,000 and application distribution. Enter today at
http://ads.osdn.com/?ad_idh82&alloc_id148&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel