is there a way to discriminate the ESTABLISHED traffic?
How can i discriminate the traffic that my firewall is answering from a NEW request from a network from the ESTABLISHED traffic that my firewall is making from a NEW request from him?
In rules, to allow traffic TO my box from the lan 10.0.0.0/32
1 ipt -A INPUT -s 10.0.0.0/32 -m state --state NEW -j ACCEPT 2 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 3 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
Now, to allow traffic FROM my box to the lan 10.0.0.0/32
4 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state NEW -j ACCEPT 5 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 6 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
The 3 and 5 rules are exactly the same. Is there a way to discriminate this or the things are just like this and there is nothing to do about it?
Tnxs in advance.
With out having a better explanation of what is going on (mach transcription) I'm going to stab in the dark here and think that you are looking for RELATED traffic as it is not established but it is not completely new either.
Grant. . . .
Quoted 18 lines · Guido Lorenzutti
How can i discriminate the traffic that my firewall is answering from a NEW request from a network from the ESTABLISHED traffic that my firewall is making from a NEW request from him?
In rules, to allow traffic TO my box from the lan 10.0.0.0/32
1 ipt -A INPUT -s 10.0.0.0/32 -m state --state NEW -j ACCEPT 2 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 3 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
Now, to allow traffic FROM my box to the lan 10.0.0.0/32
4 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state NEW -j ACCEPT 5 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 6 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
The 3 and 5 rules are exactly the same. Is there a way to discriminate this or the things are just like this and there is nothing to do about it?
Tnxs in advance.
Quoted 12 lines · Guido Lorenzutti
How can i discriminate the traffic that my firewall is answering from a NEW request from a network from the ESTABLISHED traffic that my firewall is making from a NEW request from him?
In rules, to allow traffic TO my box from the lan 10.0.0.0/32
1 ipt -A INPUT -s 10.0.0.0/32 -m state --state NEW -j ACCEPT 2 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 3 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
Now, to allow traffic FROM my box to the lan 10.0.0.0/32
Quoted 8 lines
4 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state NEW -j ACCEPT 5 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 6 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
The 3 and 5 rules are exactly the same. Is there a way to discriminate this or the things are just like this and there is nothing to do about it?
Tnxs in advance.
If I understand you correctly, you are asking if you can distinguish established traffic patterns recorded in the conntrack table depending on whether the firewall initiated the session or was responding to some other device. I believe that once the traffic flow is being managed by connection tracking, the packets never traverse the filter table. Thus, you cannot them there.
I suppose one could see them in the raw table but even then, it would be difficult to distinguish after the SYN, SYN/ACK, SYN/ACK sequence for TCP and even more so for UDP. Why do you want to distinguish them? Perhaps there is another way to achieve your goal? - John
Signature · 8 lines
John A. Sullivan III Open Source Development Corporation +1 207-985-7880 [email protected] If you would like to participate in the development of an open source enterprise class network security management system, please visit http://iscs.sourceforge.net
Quoted 3 lines · John A. Sullivan III
other device. I believe that once the traffic flow is being managed by connection tracking, the packets never traverse the filter table. Thus, you cannot them there.
s/filter/nat/, but there is no NAT involved in the question.
Best regards,
Jozsef
-
E-mail : [email protected], [email protected] PGP key : http://www.kfki.hu/~kadlec/pgp_public_key.txt
Address : KFKI Research Institute for Particle and Nuclear Physics
H-1525 Budapest 114, POB. 49, Hungary
Quoted 10 lines · Guido Lorenzutti
How can i discriminate the traffic that my firewall is answering from a NEW request from a network from the ESTABLISHED traffic that my firewall is making from a NEW request from him?
In rules, to allow traffic TO my box from the lan 10.0.0.0/32
1 ipt -A INPUT -s 10.0.0.0/32 -m state --state NEW -j ACCEPT 2 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 3 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
Now, to allow traffic FROM my box to the lan 10.0.0.0/32
Quoted 9 lines
4 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state NEW -j ACCEPT 5 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 6 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
The 3 and 5 rules are exactly the same. Is there a way to discriminate this or the things are just like this and there is nothing to do about it?
Tnxs in advance.
btw 10.0.0.0/32 ?!
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 20 lines · Guido Lorenzutti
Quoted 18 lines · Georgi Alexandrov
Quoted 16 lines · Guido Lorenzutti
How can i discriminate the traffic that my firewall is answering from a NEW request from a network from the ESTABLISHED traffic that my firewall is making from a NEW request from him?
In rules, to allow traffic TO my box from the lan 10.0.0.0/32
1 ipt -A INPUT -s 10.0.0.0/32 -m state --state NEW -j ACCEPT 2 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 3 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
Now, to allow traffic FROM my box to the lan 10.0.0.0/32
4 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state NEW -j ACCEPT 5 ipt -A OUTPUT -d 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT 6 ipt -A INPUT -s 10.0.0.0/32 -m state --state ESTABLISHED -j ACCEPT
The 3 and 5 rules are exactly the same. Is there a way to discriminate this or the things are just like this and there is nothing to do about it?
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Tnxs in advance.
btw 10.0.0.0/32 ?!
Yeah.. what? I make my 10.0.0.0 subnet a class C :) It's Ok to do that, try it!! :P
You probably mean 10.0.0.0/24 then ?
regards,
Georgi Alexandrov