Skip to contentSkip to conversation

Beginner with PAND

Bluez-users William M. Quarles 3 participants 5 messages Apr 21, 2005 – Apr 23, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

(everybody on this list seems to be an expert, so there are plenty of people who should be able to help me out with this :-))

Hi,

I am trying to set up one of my computers to work as an Internet router for other bluetooth devices. I'm trying to use pand, and I notice that it has this -e flag. I use it to designate the ethernet device name that I want to give to my bluetooth stack/dongle (someone correct me if I am not understanding this correctly). Well, ifconfig doesn't reveal another device when pand is running. I can't network to a device that doesn't exist. So what do I do?

Thanks,
William

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi William,

Quoted 7 lines

I am trying to set up one of my computers to work as an Internet router for other bluetooth devices. I'm trying to use pand, and I notice that it has this -e flag. I use it to designate the ethernet device name that I want to give to my bluetooth stack/dongle (someone correct me if I am not understanding this correctly). Well, ifconfig doesn't reveal another device when pand is running. I can't network to a device that doesn't exist. So what do I do?

the bnep0 device is only created when you actually created the BNEP connection. To set the IP before the connection you must use a Bridge on top the bnepX interfaces. Check the PAN howto for details.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw
Quoted 12 lines · Marcel Holtmann

Hi William,

Quoted 7 lines

I am trying to set up one of my computers to work as an Internet router for other bluetooth devices. I'm trying to use pand, and I notice that it has this -e flag. I use it to designate the ethernet device name that I want to give to my bluetooth stack/dongle (someone correct me if I am not understanding this correctly). Well, ifconfig doesn't reveal another device when pand is running. I can't network to a device that doesn't exist. So what do I do?

Quoted 3 lines

the bnep0 device is only created when you actually created the BNEP connection. To set the IP before the connection you must use a Bridge on top the bnepX interfaces. Check the PAN howto for details.

Marcel,

I guess you mean the How-Tos on your website, holtmann.org (now that I look around)?

Wow, you have GUI on there? I didn't see that advertised on the BlueZ site. It should be.

William

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#3 lore raw
In reply to Marcel Holtmann
Quoted 12 lines · Marcel Holtmann

Hi William,

Quoted 7 lines

I am trying to set up one of my computers to work as an Internet router for other bluetooth devices. I'm trying to use pand, and I notice that it has this -e flag. I use it to designate the ethernet device name that I want to give to my bluetooth stack/dongle (someone correct me if I am not understanding this correctly). Well, ifconfig doesn't reveal another device when pand is running. I can't network to a device that doesn't exist. So what do I do?

Quoted 3 lines

the bnep0 device is only created when you actually created the BNEP connection. To set the IP before the connection you must use a Bridge on top the bnepX interfaces. Check the PAN howto for details.

Why do I need a bridge? I don't have to create a bridge in MS Windows XP to set this up. I don't really want a bridge either. Are you sure that there isn't another way?

William

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#4 lore raw

Hi William,

Quoted 8 lines
Quoted 8 lines
Quoted 7 lines

I am trying to set up one of my computers to work as an Internet router for other bluetooth devices. I'm trying to use pand, and I notice that it has this -e flag. I use it to designate the ethernet device name that I want to give to my bluetooth stack/dongle (someone correct me if I am not understanding this correctly). Well, ifconfig doesn't reveal another device when pand is running. I can't network to a device that doesn't exist. So what do I do?

Quoted 7 lines
Quoted 3 lines

the bnep0 device is only created when you actually created the BNEP connection. To set the IP before the connection you must use a Bridge on top the bnepX interfaces. Check the PAN howto for details.

Why do I need a bridge? I don't have to create a bridge in MS Windows XP to set this up. I don't really want a bridge either. Are you sure that there isn't another way?

this is not Windows, period.

However you can do it without a bridge, but then you have to deal with the IP assignment over the hotplug or your distribution specific methods. The bnep0 is only available when the connection is established and it will go away when the connection terminates.

Regards

Marcel

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users