Skip to contentSkip to conversation

powernow-k8 in 2.6.8 - 2.6.11.8 causes system hang

DISCUSSION Gustav Petersson 2 participants 2 messages May 7, 2005 – May 8, 2005

lore
Share & tools
lore
#0 lore raw

Hello all, I haven't found any reports on this issue anywhere so I'm starting to think it's a motherboard or BIOS issue but I figure I should report it anyway.

I have an Asus K8N-E Deluxe (socket 754) with an Athlon64 3000+. I've tried with different BIOS versions, from 1005 to 1007-beta without success.

I've tried using powernowd, cpufreqd, ondemand governor and userspace governor and manually setting the speed. There is no error reported in dmesg when the system starts to behave strangely, core dumps etc., and eventually it hangs occasionally producing a kernel oops. Please tell me if I've forgotten to include any infomation that could help you figure out what the problem is.

Here is my /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 12
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 2009.811
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow
bogomips : 3981.31

...and the relevant parts of dmesg:
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)

powernow-k8:    0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8:    2 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)

cpu_init done, current fid 0xc, vid 0x2

Br
Gustav Petersson

#1 lore raw
Quoted 7 lines · Gustav Petersson

Hello all, I haven't found any reports on this issue anywhere so I'm starting to think it's a motherboard or BIOS issue but I figure I should report it anyway.

I have an Asus K8N-E Deluxe (socket 754) with an Athlon64 3000+. I've tried with different BIOS versions, from 1005 to 1007-beta without success.

I also have this exact combination of motherboard and cpu and I experience the same problems: when the processor is in "performance" mode, the system works perfectly (I have 3 months+ uptime on it). As soon as I lower the speed (either manually, or automaticaly using some kernel or userspace daemon), random processes get killed (X, gcc etc with signal 11), and sooner or later the system hangs.

Since this is my main workstation (and I don't really need cpufreq) I haven't done much testing. I also mainly run RedHat (FC3) kernels on this box.

Stelian.

Signature · 1 line
Stelian Pop <[email protected]>