PROBLEM: ICH6M not recognised as being AHCI capable (libata)
1. ICH6M not recognised as being AHCI capable (libata)
2. During startup, libata refuses to talk to the ICH6 using AHCI, I get these messages:
libata version 1.10 loaded.
ahci version 1.00
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
ahci: probe of 0000:00:1f.2 failed with error -12ata_piix version 1.03
[-12 == ENOMEM???]
3. libata ich6m ahci
4. Linux version 2.6.12-rc1-bk5 (erik@skylla) (gcc version 4.0.0 20050505 (Red Hat 4.0.0-4)) #12 Tue May 17 15:17:44 CEST 2005
5. No oops
6. init 6 ;-)
7.1.================================================================ If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux skylla 2.6.12-rc1-bk5 #12 Tue May 17 15:17:44 CEST 2005 i686 i686 i386 GNU /Linux
Gnu C 4.0.0 Gnu make 3.80 binutils 2.15.94.0.2.2 util-linux 2.12p mount 2.12p module-init-tools 2.4.26 e2fsprogs 1.37 reiserfsprogs line reiser4progs line pcmcia-cs 3.2.8 quota-tools 3.12. nfs-utils 1.0.7 Linux C Library x 2 root root 1489284 May 4 22:26 /lib/libc.so.6 Dynamic linker (ldd) 2.3.5 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 057 Modules Loaded psmouse autofs4 sunrpc af_packet binfmt_misc
usb_storage evdev usbhid i8k ohci1394 ieee1394 uhci_hcd ehci_hcd snd_pcm_oss snd_mixer_oss s nd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc usbcor e
====================================================================
7.2. ===============================================================vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 2.13GHz
stepping : 8
cpu MHz : 798.210
cache size : 2048 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2
bogomips : 1572.86
=====================================================================
7.3. see 7.1 7.4.================================================================= 0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : libata
03c0-03df : vga+
1000-1005 : motherboard
1000-1003 : PM1a_EVT_BLK
1004-1005 : PM1a_CNT_BLK
1006-1007 : motherboard
1008-100f : motherboard
1008-100b : PM_TMR
1020-1020 : PM2_CNT_BLK
1028-102f : GPE0_BLK
1060-107f : motherboard
1080-10bf : motherboard
10c0-10df : 0000:00:1f.3
10c0-10df : motherboard
10e0-10ff : motherboard
10e0-10e5 : ACPI CPU throttle
4000-40ff : PCI CardBus #04
4400-44ff : PCI CardBus #04
bf20-bf3f : 0000:00:1d.3
bf20-bf3f : uhci_hcd
bf40-bf5f : 0000:00:1d.2
bf40-bf5f : uhci_hcd
bf60-bf7f : 0000:00:1d.1
bf60-bf7f : uhci_hcd
bf80-bf9f : 0000:00:1d.0
bf80-bf9f : uhci_hcd
bfa0-bfaf : 0000:00:1f.2
bfa0-bfaf : libata
d000-dfff : PCI Bus #01
de00-deff : 0000:01:00.0
ec40-ec7f : 0000:00:1e.2
ec40-ec7f : Intel ICH6
ec80-ecff : 0000:00:1e.3
ed00-edff : 0000:00:1e.2
ed00-edff : Intel ICH6
ee00-eeff : 0000:00:1e.3
f400-f4fe : motherboard
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000f0000-000fffff : System ROM
00100000-3ffd9fff : System RAM
00100000-002e1509 : Kernel code
002e150a-003db6bf : Kernel data
3ffda000-3fffffff : reserved
40000000-40000fff : 0000:03:01.0
40000000-40000fff : yenta_socket
40400000-407fffff : PCI CardBus #04
40800000-40bfffff : PCI CardBus #04
d0000000-d7ffffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
dfcfc700-dfcfc7ff : 0000:03:01.2
dfcfc800-dfcfcfff : 0000:03:01.1
dfcfc800-dfcfcfff : ohci1394
dfcfd000-dfcfdfff : 0000:03:03.0
dfcfe000-dfcfffff : 0000:03:00.0
dfcfe000-dfcfffff : b44
dfd00000-dfefffff : PCI Bus #01
dfdf0000-dfdfffff : 0000:01:00.0
dffffd00-dffffdff : 0000:00:1e.2
dffffd00-dffffdff : Intel ICH6
dffffe00-dfffffff : 0000:00:1e.2
dffffe00-dfffffff : Intel ICH6
e0000000-f0006fff : reserved
f0008000-f000bfff : reserved
fec00000-fec0ffff : reserved
fed20000-fee0ffff : reserved
ffa80800-ffa80bff : 0000:00:1d.7
ffa80800-ffa80bff : ehci_hcd
ffb00000-ffffffff : reserved
7.5.============================================================
$ lspci (I'll add lspci -vv on request) 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 03:01.2 Class 0805: Ricoh Co Ltd SD Card reader (rev 17) 03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) ====================================================================
7.6. =============================================================== Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: FUJITSU MHT2080A Rev: 006C
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: DVD+-RW DW-D56A Rev: PDS3
Type: CD-ROM ANSI SCSI revision: 05
====================================================================
7.7. Dell Inspiron 9300, Pentium M, ICH6(M), Fujitsu SATA harddisk, SONY ATAPI DVD+R/W. Note that the BIOS setup screen does not offer an option to switch between legacy IDE mode and AHCI mode.
Quoted 5 lines · Erik Slagter
1. ICH6M not recognised as being AHCI capable (libata)
2. During startup, libata refuses to talk to the ICH6 using AHCI, I get these messages:
Quoted 7 lines
libata version 1.10 loaded.
ahci version 1.00
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
ahci: probe of 0000:00:1f.2 failed with error -12ata_piixversion 1.03[-12 == ENOMEM???]
You need to either load ata_piix driver, or tell your BIOS to initialize AHCI mode.
Jeff
Quoted 12 lines · Jeff Garzik
Quoted 11 lines · Erik Slagter
1. ICH6M not recognised as being AHCI capable (libata)
2. During startup, libata refuses to talk to the ICH6 using AHCI, I get these messages:
libata version 1.10 loaded.
ahci version 1.00
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
ahci: probe of 0000:00:1f.2 failed with error -12ata_piixversion 1.03
Quoted 4 lines
Quoted 1 line
[-12 == ENOMEM???]
You need to either load
ata_piixdriver, or tell your BIOS to initialize AHCI mode.
I do have ata_piix loaded (as you can see in the log). I don't have a BIOS option to enable AHCI mode, I was hoping linux could force it somehow.
BTW It works using the ata_piix driver (in legacy mode), but of course I'd rather have the AHCI mode.