Skip to contentSkip to conversation

IDE DMA with SATA, 2.6 kernels

DISCUSSION Tyler Eaves 3 participants 3 messages May 26, 2005 – May 28, 2005

lore
Share & tools
lore
#0 lore raw

My system is an Athlon64 3000+ running on a Via KT800 board. Distro is Ubuntu 5.04, running the Ubuntu AMD64-k8 2.6.11 kernel. However, I've seen this problem with several other distros and various kernels, so it seems to be a kernel issue.

Disk Setup:

/dev/sda is a 200GB Maxtor SATA drive containing /boot,/, and swap /dev/hda is a DVD-ROM/CD-RW driver (IDE)
/dev/hdc is a 160GB Maxtor IDE drive containing ThatOtherOS(TM)

The SATA drive works superbly, in UDMA133 mode. No complaints there. However, it appears that the generic IDE driver grabs the IDE drives before the Via driver can get them. This prevents me from using DMA on those drivers, so, for instance, ripping CDs is really painful. I can rip at about 2x on a good day, versus 40x+ ripping in Exact Audio Copy under XP.

You can find the relevant portion of my dmesg (and hdparm) at
http://cg2.org/dmesg.txt

Any assistance would be very much appreciated.

#1 lore raw
Quoted 5 lines · Tyler Eaves

However, it appears that the generic IDE driver grabs the IDE drives before the Via driver can get them. This prevents me from using DMA on those drivers, so, for instance, ripping CDs is really painful. I can rip at about 2x on a good day, versus 40x+ ripping in Exact Audio Copy under XP.

Disable CONFIG_IDE_GENERIC and CONFIG_BLK_DEV_GENERIC in .config ?

Jeff

#2 lore raw
In reply to Tyler Eaves
Quoted 11 lines · Tyler Eaves

My system is an Athlon64 3000+ running on a Via KT800 board. Distro is Ubuntu 5.04, running the Ubuntu AMD64-k8 2.6.11 kernel. However, I've seen this problem with several other distros and various kernels, so it seems to be a kernel issue.

Disk Setup:

/dev/sda is a 200GB Maxtor SATA drive containing /boot,/, and swap /dev/hda is a DVD-ROM/CD-RW driver (IDE)
/dev/hdc is a 160GB Maxtor IDE drive containing ThatOtherOS(TM)

Quoted 6 lines

The SATA drive works superbly, in UDMA133 mode. No complaints there. However, it appears that the generic IDE driver grabs the IDE drives before the Via driver can get them. This prevents me from using DMA on those drivers, so, for instance, ripping CDs is really painful. I can rip at about 2x on a good day, versus 40x+ ripping in Exact Audio Copy under XP.

Art Perry writes:
See the man page for the utility hdparm.
The VIA driver should know how to apply the UDA modes to the chipset, as long as the drives do also support the modes. If the kernel did not auto configure the chipset to this mode, simply tell it to with the hdparm utility. Hope this helps.

Quoted 4 lines

You can find the relevant portion of my dmesg (and hdparm) at
http://cg2.org/dmesg.txt

Quoted 8 lines

Any assistance would be very much appreciated.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Arthur Perry
Linux Systems/Software Architect, 7+ yrs
Tech Mktng Task Force
non-disclosed corporate association

Disclaimer:
"The contents of this email do not necessarily reflect
the views of my non-disclosed corporate association" ;)