Skip to contentSkip to conversation

A sound driver for NEC VR5701-SG2 Board

PATCH New Sergey Podstavin 1 participant 1 message May 31, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 A sound driver for NEC VR5701-SG2 Board

Hi Andrew!

Attached is a sound driver for NEC VR5701-SG2 Board. It's a Vr5701 CPU's internal AC97 Interface. The driver works with AC97 Codec.

sound/oss/Kconfig +7 -0
diff -Naurp --exclude=CVS linux_mips_save/sound/oss/Kconfig linux_mips/sound/oss/Kconfig
@@ -216,6 +216,13 @@ config SOUND_VRC5477
 	  integrated, multi-function controller chip for MIPS CPUs.  Works
 	  with the AC97 codec.
 
+config SOUND_VR5701
+	tristate "NEC VR5701-SG2 AC97 sound"
+	depends on SOUND_PRIME!=n && TCUBE && SOUND
+	help
+	  Say Y here to enable sound support for the NEC VR5701-SG2 AC97 sound.
+	  Works with the AC97 codec.
+
 config SOUND_AU1000
 	tristate "Au1000 Sound"
 	depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
sound/oss/Makefile +1 -0
diff -Naurp --exclude=CVS linux_mips_save/sound/oss/Makefile linux_mips/sound/oss/Makefile
@@ -64,6 +64,7 @@ endif
 obj-$(CONFIG_SOUND_ES1370)	+= es1370.o
 obj-$(CONFIG_SOUND_ES1371)	+= es1371.o ac97_codec.o
 obj-$(CONFIG_SOUND_VRC5477)	+= nec_vrc5477.o ac97_codec.o
+obj-$(CONFIG_SOUND_VR5701)	+= nec_vr5701_sg2.o ac97_codec.o
 obj-$(CONFIG_SOUND_AU1000)	+= au1000.o ac97_codec.o  
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o  
 obj-$(CONFIG_SOUND_AU1550_I2S)	+= au1550_i2s.o  
sound/oss/nec_vr5701_sg2.c +1355 -0

1,355 lines not on this page · raw message

sound/oss/nec_vr5701_sg2.h +530 -0

530 lines not on this page · raw message