default values for pci dma_mask and coherent_dma_mask
Hi,
From Documentation/DMA-mapping.txt:
Quoted 8 lines
pci_alloc_consistent()by default will return 32-bit DMA addresses. PCI-X specification requires PCI-X devices to support 64-bit addressing (DAC) for all transactions. And at least one platform (SGI SN2) requires 64-bit consistent allocations to operate correctly when the IO bus is in PCI-X mode. Therefore, like withpci_set_dma_mask(), it's good practice to callpci_set_consistent_dma_mask()to set the appropriate mask even if your device only supports 32-bit DMA (default) and especially if it's a PCI-X device.
What does "good practice" mean? Is the default 32-bit on all archs or not?
Recent nForce nics support 32-bit for the (coherent) ring buffer and 40-bit for the rx/tx data buffers. I intend to add these lines to the driver:
+ if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
+ pci_name(pci_dev));
+ }
Is this sufficient, or is it mandatory to add pci_set_dma_mask(,DMA_32BIT_MASK) and pci_set_consistent_dma_mask (with error handling - IMHO 10 useless lines).
--
Manfred
Quoted 7 lines · Manfred Spraul
I intend to add these lines to the
driver:(quoted diff) +2
-0+ if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) { + printk(KERN_INFO "forcedeth: 64-bit DMA failed, using32-bit
addressing for device %s.\n",
Please don't do this. Instead, add a DMA_40BIT_MASK define to dma_mapping.h.
Lee