Hang at resume with AC adapter not plugged
Hi everybody,
I have a little problem with software suspend 2.1.9.1[012] on 2.6.13-rc[3456]. The system hangs on resume if the AC adapter is not plugged in. Everything works well if I use 2.1.9.5 on 2.6.12.x or plug in the AC adapter. I've tried acpi-20050729 for 2.6.13-rc6 but that did not change anything. The system is a Sumsung X10.
Any ideas what could be the problem?
Signature · 2 lines
Regards, Christian
Hi Christian.
Quoted 9 lines · Christian Hesse
Hi everybody,
I have a little problem with software suspend 2.1.9.1[012] on 2.6.13-rc[3456]. The system hangs on resume if the AC adapter is not plugged in. Everything works well if I use 2.1.9.5 on 2.6.12.x or plug in the AC adapter. I've tried acpi-20050729 for 2.6.13-rc6 but that did not change anything. The system is a Sumsung X10.
Any ideas what could be the problem?
Do you have the ACPI modules compiled in, or built as modules? I'd suggest that you try building them as modules and unloading while suspending if you're not doing that already.
Regards,
Nigel
Signature · 4 lines
Evolution. Enumerate the requirements. Consider the interdependencies. Calculate the probabilities.
Quoted 11 lines · Nigel Cunningham
Hi Christian.
Quoted 8 lines · Christian Hesse
Hi everybody,
I have a little problem with software suspend 2.1.9.1[012] on 2.6.13-rc[3456]. The system hangs on resume if the AC adapter is not plugged in. Everything works well if I use 2.1.9.5 on 2.6.12.x or plug in the AC adapter. I've tried acpi-20050729 for 2.6.13-rc6 but that did not change anything. The system is a Sumsung X10.
Quoted 5 lines
Quoted 1 line
Any ideas what could be the problem?
Do you have the ACPI modules compiled in, or built as modules? I'd suggest that you try building them as modules and unloading while suspending if you're not doing that already.
Sometimes (very seldom) it also hangs if the AC adapter is plugged in, so I tested some more and found another interesting fact: It boots just fine if I use splash=verbose insted of splash=silent (even without AC adapter). I've patched the kernel with fbsplash-0.9.2-r4-2.6.13-rc[16].
Any idea what could be the cause?
Signature · 1 line
Christian