Hardware specs?
Hi everyone,
I'm in the position of needing to write a Radeon driver for a new system board being built here at our university. I figured my first steps would be to try and reproduce the radeonfb driver to change the resolution, and go from there.
Up until now I've been only developing graphics applications, so alot of these things are new to me - pixel clocks, horizontal timings, PLL, MTRR etc.etc.... it's all quite overwhelming. I've been reading as much as I can, but there are still big gaps in my understanding - how did everyone else get up to speed in this area?
My main problem is that although it's fairly easy to follow the radeonfb source and the fb in general, when it comes to what register does what I'm completely lost. Did the people who wrote the driver have technical specs from ATI telling them which did what? Are the specs openly available, only under NDA, or not at all?!
I'd really appreciate any tips anyone could give me on where I should be looking. Thanks,
Keith
Signature · 14 lines
_____________ Keith O'Conor Image Synthesis Group Computer Science Department University of Dublin, Trinity College http://isg.cs.tcd.ie/keith ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Quoted 6 lines · Keith O'Conor
Up until now I've been only developing graphics applications, so alot of these things are new to me - pixel clocks, horizontal timings, PLL, MTRR etc.etc.... it's all quite overwhelming. I've been reading as much as I can, but there are still big gaps in my understanding - how did everyone else get up to speed in this area?
I did it basically the way you're doing it, by reading and tweaking code. :)
Quoted 4 lines
My main problem is that although it's fairly easy to follow the radeonfb source and the fb in general, when it comes to what register does what I'm completely lost. Did the people who wrote the driver have technical specs from ATI telling them which did what?
Some of us do, yes.
Quoted 1 line
Are the specs openly available, only under NDA, or not at all?!
Only under NDA, and I'm afraid it's hard to get them even under that ATM. Your best way forward might be to ask specific questions about existing code.
Signature · 9 lines
Earthling Michel Dänzer | Debian (powerpc), X and DRI developer Libre software enthusiast | http://svcs.affero.net/rm.php?r=daenzer ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
Thanks for the reply. I've applied to the ATI Developer Relations program under the project I'm working on, maybe they'll see fit to give me some manuals - I'm only looking for details on chips circa 9200, nothing too recent.
Until then, I've dug up Voodoo3 and Matrox G400 datasheets - I'll go through the relevant code armed with these and see if I can figure things out that way. I'm sure I'll have a question or two to ask you on the way!
Thanks,
Keith
Quoted 21 lines · Michel Dänzer
Quoted 3 lines · Keith O'Conor
Up until now I've been only developing graphics applications, so alot of these things are new to me - pixel clocks, horizontal timings, PLL, MTRR etc.etc.... it's all quite overwhelming. I've been reading as much as I can, but there are still big gaps in my understanding - how did everyone else get up to speed in this area?
I did it basically the way you're doing it, by reading and tweaking code. :)
Quoted 3 lines
My main problem is that although it's fairly easy to follow the radeonfb source and the fb in general, when it comes to what register does what I'm completely lost. Did the people who wrote the driver have technical specs from ATI telling them which did what?
Some of us do, yes.
Quoted 11 lines
Quoted 3 lines
Are the specs openly available, only under NDA, or not at all?!
Only under NDA, and I'm afraid it's hard to get them even under that ATM. Your best way forward might be to ask specific questions about existing code.
_____________
Keith O'Conor
Image Synthesis Group
Computer Science Department
University of Dublin, Trinity College
http://isg.cs.tcd.ie/keith
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf