very weired random io behavior
I ran a small test program on a 400GB SATA disk connected to Marvel chip. Using 2.6.11.12 kernel and get this strange behavior.
# iostat -k -p /dev/sdj Linux 2.6.11.12 (bakstor2u.localdomain) 08/26/2005
avg-cpu: %user %nice %sys %iowait %idle
0.11 0.00 6.63 54.75 38.51Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
sdj 0.00 0.01 0.00 36 0
start with no io. run program with /dev/sdj and count 10240. i supposed it should only write 40MB data and no read should be generated. but result is quite weired. there are almost same amount of read and total size is around 80MB.
# iostat -k -p /dev/sdj Linux 2.6.11.12 (bakstor2u.localdomain) 08/26/2005
avg-cpu: %user %nice %sys %iowait %idle
0.11 0.00 6.48 55.65 37.77Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
sdj 4.26 11.31 11.47 80476 81640
pls cc to me.
Thanks!
Ming
---------------------------------------------------
#define _LARGEFILE64_SOURCE
#include <stdlib.h>
#include <sys/types.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
int main(int argc, char *argv[])
{
int n;
int i, count;
char *name;
char buf[4096];
int fd;
if (argc != 3) {
printf("%s name count\n", argv[0]);
exit(1);
}
name = argv[1];
count = atoi(argv[2]);
fd = open(name, O_CREAT|O_WRONLY, S_IRWXU);
for (i = 0; i < count; i++) {
unsigned long x;
x = (rand() >> 1) << 1;
lseek64(fd, x, SEEK_SET);
write(fd, buf, 4096);
}
printf("done\n");
close(fd);
return 0;
}sorry. my dumb.
here is not
x = (rand() >> 1) << 1;
but
x = (rand() >> 10) << 10;
file is in bytes while lba is in sector. ;P
ming
Quoted 38 lines · Ming Zhang
---------------------------------------------------
#define_LARGEFILE64_SOURCE#include <
stdlib.h>
#include <sys/types.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>int
main(int argc, char *argv[]){ int n; int i, count; char *name; char buf[4096]; int fd; if (argc != 3) { printf("%s name count\n", argv[0]); exit(1); } name = argv[1]; count = atoi(argv[2]); fd = open(name, O_CREAT|O_WRONLY, S_IRWXU); for (i = 0; i < count; i++) { unsigned long x; x = (rand() >> 1) << 1; lseek64(fd, x, SEEK_SET); write(fd, buf, 4096); } printf("done\n"); close(fd); return 0; }