synclinkmp.c fix async internal loopback
PATCH 1/1 synclinkmp.c fix async internal loopback
[patch] synclinkmp.c fix async internal loopback
From: Paul Fulghum <[email protected]>
Fix async internal loopback by not usingenable_loopback function which reprograms
clocking and should only be used for hdlc mode.
Signed-off-by Paul Fulghum <[email protected]>
drivers/char/synclinkmp.c +3 -4
@@ -4489,11 +4489,13 @@ void async_mode(SLMP_INFO *info)/* MD2, Mode Register 2 * * 07..02 Reserved, must be 0 -* 01..00 CNCT<1..0> Channel connection, 0=normal +* 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback * * 0000 0000 */ RegValue =0x00 ; +if (info->params.loopback) + RegValue |= (BIT1 +BIT0 );write_reg (info,MD2 , RegValue);/* RXS, Receive clock source
@@ -4574,9 +4576,6 @@ void async_mode(SLMP_INFO *info)write_reg (info,IE2 , info->ie2_value);set_rate ( info, info->params.data_rate *16 ); - -if (info->params.loopback) -enable_loopback (info,1 ); }/* Program the SCA for HDLC communications.