SharpSL: Abstract model specifics from Corgi Backlight driver
Subsystems (5)
PATCH 4/6 SharpSL: Abstract model specifics from Corgi Backlight driver
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi backlight driver. Abstract model/machine specific functions to corgi_lcd.c via sharpsl.h
This enables the driver to be used by the Zaurus cxx00 series.
Signed-off-by Richard Purdie <[email protected]>
drivers/video/backlight/corgi_bl.c +16 -18
@@ -19,17 +19,18 @@#include <linux/fb.h> #include <linux/backlight.h> -#include <asm/arch-pxa/corgi.h> -#include <asm/hardware/scoop.h> +#include <asm/mach-types.h> +#include <asm/arch/sharpsl.h> -#define CORGI_MAX_INTENSITY 0x3e#define CORGI_DEFAULT_INTENSITY 0x1f -#define CORGI_LIMIT_MASK 0x0b +#define CORGI_LIMIT_MASK 0x0bstatic int corgibl_powermode =FB_BLANK_UNBLANK ;static int current_intensity =0 ;static int corgibl_limit =0 ; +static void (*corgibl_mach_set_intensity)(int intensity);static DEFINE_SPINLOCK (bl_lock); +static struct backlight_properties corgibl_data;static void corgibl_send_intensity (int intensity) {
@@ -43,18 +44,10 @@ intensity &=CORGI_LIMIT_MASK ; } -/* Skip 0x20 as it will blank the display */ -if (intensity >=0x20 ) - intensity++; -spin_lock_irqsave (&bl_lock, flags); -/* Bits 0-4 are accessed via the SSP interface */ -corgi_ssp_blduty_set (intensity &0x1f ); -/* Bit 5 is via SCOOP */ -if (intensity &0x0020 ) -set_scoop_gpio (&corgiscoop_device.dev,CORGI_SCP_BACKLIGHT_CONT ); -else -reset_scoop_gpio (&corgiscoop_device.dev,CORGI_SCP_BACKLIGHT_CONT ); + +corgibl_mach_set_intensity (intensity); +spin_unlock_irqrestore (&bl_lock, flags); }
@@ -113,8 +106,8 @@static int corgibl_set_intensity (struct backlight_device *bd,int intensity) { -if (intensity >CORGI_MAX_INTENSITY ) - intensity =CORGI_MAX_INTENSITY ; +if (intensity > corgibl_data.max_brightness) + intensity = corgibl_data.max_brightness;corgibl_send_intensity (intensity); current_intensity=intensity;return 0 ;
@@ -141,7 +134,6 @@ .owner = THIS_MODULE, .get_power = corgibl_get_power, .set_power = corgibl_set_power, - .max_brightness = CORGI_MAX_INTENSITY, .get_brightness = corgibl_get_intensity, .set_brightness = corgibl_set_intensity, };
@@ -150,12 +142,18 @@static int __init corgibl_probe (struct device *dev) { +struct corgibl_machinfo *machinfo = dev->platform_data; + + corgibl_data.max_brightness = machinfo->max_intensity; + corgibl_mach_set_intensity = machinfo->set_bl_intensity; + corgi_backlight_device =backlight_device_register ("corgi-bl" ,NULL , &corgibl_data);if (IS_ERR (corgi_backlight_device))return PTR_ERR (corgi_backlight_device);corgibl_set_intensity (NULL ,CORGI_DEFAULT_INTENSITY ); +corgibl_limit_intensity (0 );printk ("Corgi Backlight Driver Initialized.\n" );return 0 ;
arch/arm/mach-pxa/corgi_lcd.c +65 -0
68 lines not on this page · raw message
include/asm-arm/arch-pxa/sharpsl.h +10 -0
@@ -20,3 +20,13 @@void (*put_hsync)(void );void (*wait_hsync)(void ); }; + +/* +* SharpSL Backlight +*/ + +struct corgibl_machinfo { +int max_intensity; +void (*set_bl_intensity)(int intensity); +}; +
arch/arm/mach-pxa/corgi.c +6 -0
@@ -109,10 +109,16 @@/* * Corgi Backlight Device */ +static struct corgibl_machinfo corgi_bl_machinfo = { + .max_intensity =0x2f , + .set_bl_intensity = corgi_bl_set_intensity, +}; +static struct platform_device corgibl_device = { .name ="corgi-bl" , .dev = { .parent = &corgifb_device.dev, + .platform_data = &corgi_bl_machinfo, }, .id =-1 , };
arch/arm/mach-pxa/sharpsl.h +8 -0
@@ -23,6 +23,14 @@void akita_bl_set_intensity (int intensity);/* +* SharpSL Backlight +*/ + +void corgi_bl_set_intensity (int intensity); +void spitz_bl_set_intensity (int intensity); +void akita_bl_set_intensity (int intensity); + +/* * SharpSL Touchscreen Driver */