Skip to contentSkip to conversation

hdaps driver update.

PATCH In review Robert Love 3 participants 11 messages Sep 14, 2005 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hdaps driver update.

Mr Morton,

The hdaps driver landed in 2.6.14-rc1.

The attached patch updates the driver:

- Remove the relative input device
- Add an absolute input device
- Misc. cleanup and bug fixing

The patch is sizable due to the cleanup from removing the relative input device (net -112 lines).

Thanks,

Robert Love

Update the hdaps driver, add absolute input device.

 drivers/hwmon/hdaps.c |  384 +++++++++++++++++---------------------------------
 1 files changed, 136 insertions(+), 248 deletions(-)
drivers/hwmon/hdaps.c +136 -248
diff -urN linux-2.6.14-rc1/drivers/hwmon/hdaps.c linux/drivers/hwmon/hdaps.c
@@ -5,10 +5,10 @@
  * Copyright (C) 2005 Jesper Juhl <[email protected]>
  *
  * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
- * T41, T42, T43, R51, and X40, at least.  It provides a basic two-axis
- * accelerometer and other data, such as the device's temperature.
+ * T41, T42, T43, R50, R50p, R51, and X40, at least.  It provides a basic
+ * two-axis accelerometer and other data, such as the device's temperature.
  *
- * Based on the document by Mark A. Smith available at
+ * This driver is based on the document by Mark A. Smith available at
  * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
  * and error.
  *
@@ -36,12 +36,7 @@
 #include <asm/io.h>
 
 #define HDAPS_LOW_PORT		0x1600	/* first port used by hdaps */
-#define HDAPS_NR_PORTS		0x30	/* 0x1600 - 0x162f */
-
-#define STATE_FRESH		0x50	/* accelerometer data is fresh */
-
-#define REFRESH_ASYNC		0x00	/* do asynchronous refresh */
-#define REFRESH_SYNC		0x01	/* do synchronous refresh */
+#define HDAPS_NR_PORTS		0x30	/* number of ports: 0x1600 - 0x162f */
 
 #define HDAPS_PORT_STATE	0x1611	/* device state */
 #define HDAPS_PORT_YPOS		0x1612	/* y-axis position */
@@ -53,7 +48,7 @@
 #define HDAPS_PORT_UNKNOWN	0x161c	/* what is this? */
 #define HDAPS_PORT_KMACT	0x161d	/* keyboard or mouse activity */
 
-#define HDAPS_READ_MASK		0xff	/* some reads have the low 8 bits set */
+#define STATE_FRESH		0x50	/* accelerometer data is fresh */
 
 #define KEYBD_MASK		0x20	/* set if keyboard activity */
 #define MOUSE_MASK		0x40	/* set if mouse activity */
@@ -63,12 +58,10 @@
 #define INIT_TIMEOUT_MSECS	4000	/* wait up to 4s for device init ... */
 #define INIT_WAIT_MSECS		200	/* ... in 200ms increments */
 
-static struct platform_device *pdev;
-static struct input_dev hdaps_idev;
+#define HDAPS_POLL_PERIOD	(HZ/20)	/* poll for input every 1/20s */
+#define HDAPS_INPUT_FUZZ	4	/* input event threshold */
+
 static struct timer_list hdaps_timer;
-static unsigned int hdaps_mousedev_threshold = 4;
-static unsigned long hdaps_poll_ms = 50;
-static unsigned int hdaps_mousedev;
 static unsigned int hdaps_invert;
 static u8 km_activity;
 static int rest_x;
@@ -81,14 +74,14 @@
  */
 static inline u8 __get_latch(u16 port)
 {
-	return inb(port) & HDAPS_READ_MASK;
+	return inb(port) & 0xff;
 }
 
 /*
- * __check_latch - Check a port latch for a given value.  Callers must hold
- * hdaps_sem.  Returns zero if the port contains the given value.
+ * __check_latch - Check a port latch for a given value.  Returns zero if the
+ * port contains the given value.  Callers must hold hdaps_sem.
  */
-static inline unsigned int __check_latch(u16 port, u8 val)
+static inline int __check_latch(u16 port, u8 val)
 {
 	if (__get_latch(port) == val)
 		return 0;
@@ -99,7 +92,7 @@
  * __wait_latch - Wait up to 100us for a port latch to get a certain value,
  * returning zero if the value is obtained.  Callers must hold hdaps_sem.
  */
-static unsigned int __wait_latch(u16 port, u8 val)
+static int __wait_latch(u16 port, u8 val)
 {
 	unsigned int i;
 
@@ -109,59 +102,42 @@
 		udelay(5);
 	}
 
-	return -EINVAL;
+	return -EIO;
 }
 
 /*
- * __device_refresh - Request a refresh from the accelerometer.
- *
- * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait.
- * Returns zero if successful and nonzero on error.
- *
- * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is
- * not up-to-date.  Always returns zero.
- *
- * Callers must hold hdaps_sem.
+ * __device_refresh - request a refresh from the accelerometer.  Does not wait
+ * for refresh to complete.  Callers must hold hdaps_sem.
  */
-static int __device_refresh(unsigned int sync)
+static void __device_refresh(void)
 {
-	u8 state;
-
-	udelay(100);
-
-	state = inb(0x1604);
-	if (state == STATE_FRESH)
-		return 0;
-
-	outb(0x11, 0x1610);
-	outb(0x01, 0x161f);
-	if (sync == REFRESH_ASYNC)
-		return 0;
+	udelay(200);
+	if (inb(0x1604) != STATE_FRESH) {
+		outb(0x11, 0x1610);
+		outb(0x01, 0x161f);
+	}
+}
 
+/*
+ * __device_refresh_sync - request a synchronous refresh from the
+ * accelerometer.  We wait for the refresh to complete.  Returns zero if
+ * successful and nonzero on error.  Callers must hold hdaps_sem.
+ */
+static int __device_refresh_sync(void)
+{
+	__device_refresh();
 	return __wait_latch(0x1604, STATE_FRESH);
 }
 
 /*
- * __device_complete - Indicate to the accelerometer that we are done reading
+ * __device_complete - indicate to the accelerometer that we are done reading
  * data, and then initiate an async refresh.  Callers must hold hdaps_sem.
  */
 static inline void __device_complete(void)
 {
 	inb(0x161f);
 	inb(0x1604);
-	__device_refresh(REFRESH_ASYNC);
-}
-
-static int __hdaps_readb_one(unsigned int port, u8 *val)
-{
-	/* do a sync refresh -- we need to be sure that we read fresh data */
-	if (__device_refresh(REFRESH_SYNC))
-		return -EIO;
-
-	*val = inb(port);
-	__device_complete();
-
-	return 0;
+	__device_refresh();
 }
 
 /*
@@ -174,20 +150,29 @@
 	int ret;
 
 	down(&hdaps_sem);
-	ret = __hdaps_readb_one(port, val);
-	up(&hdaps_sem);
 
+	/* do a sync refresh -- we need to be sure that we read fresh data */
+	ret = __device_refresh_sync();
+	if (ret)
+		goto out;
+
+	*val = inb(port);
+	__device_complete();
+
+out:
+	up(&hdaps_sem);
 	return ret;
 }
 
+/* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */
 static int __hdaps_read_pair(unsigned int port1, unsigned int port2,
 			     int *x, int *y)
 {
 	/* do a sync refresh -- we need to be sure that we read fresh data */
-	if (__device_refresh(REFRESH_SYNC))
+	if (__device_refresh_sync())
 		return -EIO;
 
-	*y = inw(port2);
+	*y = inw(port2);	
 	*x = inw(port1);
 	km_activity = inb(HDAPS_PORT_KMACT);
 	__device_complete();
@@ -217,11 +202,13 @@
 	return ret;
 }
 
-/* initialize the accelerometer */
+/*
+ * hdaps_device_init - initialize the accelerometer.  Returns zero on success
+ * and negative error code on failure.  Can sleep.
+ */
 static int hdaps_device_init(void)
 {
-	unsigned int total_msecs = INIT_TIMEOUT_MSECS;
-	int ret = -ENXIO;
+	int total, ret = -ENXIO;
 
 	down(&hdaps_sem);
 
@@ -231,8 +218,10 @@
 		goto out;
 
 	/*
-	 * The 0x03 value appears to only work on some thinkpads, such as the
-	 * T42p.  Others return 0x01.
+	 * Most ThinkPads return 0x01.
+	 *
+	 * Others--namely the R50p, T41p, and T42p--return 0x03.  These laptops
+	 * have "inverted" axises.
 	 *
 	 * The 0x02 value occurs when the chip has been previously initialized.
 	 */
@@ -267,24 +256,23 @@
 	outb(0x01, 0x161f);
 	if (__wait_latch(0x161f, 0x00))
 		goto out;
-	if (__device_refresh(REFRESH_SYNC))
+	if (__device_refresh_sync())
 		goto out;
 	if (__wait_latch(0x1611, 0x00))
 		goto out;
 
 	/* we have done our dance, now let's wait for the applause */
-	while (total_msecs > 0) {
-		u8 ignored;
+	for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
+		int x, y;
 
 		/* a read of the device helps push it into action */
-		__hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored);
+		__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y);
 		if (!__wait_latch(0x1611, 0x02)) {
 			ret = 0;
 			break;
 		}
 
 		msleep(INIT_WAIT_MSECS);
-		total_msecs -= INIT_WAIT_MSECS;
 	}
 
 out:
@@ -293,96 +281,6 @@
 }
 
 
-/* Input class stuff */
-
-/*
- * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem.
- */
-static void hdaps_calibrate(void)
-{
-	int x, y;
-
-	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-		return;
-
-	rest_x = x;
-	rest_y = y;
-}
-
-static void hdaps_mousedev_poll(unsigned long unused)
-{
-	int x, y;
-
-	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
-	if (down_trylock(&hdaps_sem)) {
-		mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms));
-		return;
-	}
-
-	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-		goto out;
-
-	x -= rest_x;
-	y -= rest_y;
-	if (abs(x) > hdaps_mousedev_threshold)
-		input_report_rel(&hdaps_idev, REL_X, x);
-	if (abs(y) > hdaps_mousedev_threshold)
-		input_report_rel(&hdaps_idev, REL_Y, y);
-	input_sync(&hdaps_idev);
-
-	mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms));
-
-out:
-	up(&hdaps_sem);
-}
-
-/*
- * hdaps_mousedev_enable - enable the input class device.  Can sleep.
- */
-static void hdaps_mousedev_enable(void)
-{
-	down(&hdaps_sem);
-
-	/* calibrate the device before enabling */
-	hdaps_calibrate();
-
-	/* initialize the input class */
-	init_input_dev(&hdaps_idev);
-	hdaps_idev.dev = &pdev->dev;
-	hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-	hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
-	hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT);
-	input_register_device(&hdaps_idev);
-
-	/* start up our timer */
-	init_timer(&hdaps_timer);
-	hdaps_timer.function = hdaps_mousedev_poll;
-	hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms);
-	add_timer(&hdaps_timer);
-
-	hdaps_mousedev = 1;
-
-	up(&hdaps_sem);
-
-	printk(KERN_INFO "hdaps: input device enabled.\n");
-}
-
-/*
- * hdaps_mousedev_disable - disable the input class device.  Caller must hold
- * hdaps_sem.
- */
-static void hdaps_mousedev_disable(void)
-{
-	down(&hdaps_sem);
-	if (hdaps_mousedev) {
-		hdaps_mousedev = 0;
-		del_timer_sync(&hdaps_timer);
-		input_unregister_device(&hdaps_idev);
-	}
-	up(&hdaps_sem);
-}
-
-
 /* Device model stuff */
 
 static int hdaps_probe(struct device *dev)
@@ -404,14 +302,69 @@
 	return 0;
 }
 
+/* dummy release function -- everything is static, nothing to free */
+static void hdaps_dummy_release(struct device *dev) { }
+
 static struct device_driver hdaps_driver = {
 	.name = "hdaps",
 	.bus = &platform_bus_type,
-	.owner = THIS_MODULE,
 	.probe = hdaps_probe,
 	.resume = hdaps_resume
 };
 
+static struct platform_device pdev = {
+	.name = "hdaps",
+	.id = -1,
+	.dev = {
+		.release = hdaps_dummy_release,
+	},
+};
+
+
+/* Input class stuff */
+
+static struct input_dev hdaps_idev = {
+	.name = "hdaps",
+	.dev = &pdev.dev,
+	.evbit = { BIT(EV_ABS) },
+	.absbit = { BIT(ABS_X) | BIT(ABS_Y) },
+	.absmin  = { [ABS_X] = -256, [ABS_Y] = -256 },
+	.absmax  = { [ABS_X] = 256, [ABS_Y] = 256 },
+	.absfuzz = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+	.absflat = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+};
+
+/*
+ * hdaps_calibrate - Set our "resting" values.  Callers must hold hdaps_sem.
+ */
+static void hdaps_calibrate(void)
+{
+	__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
+}
+
+static void hdaps_mousedev_poll(unsigned long unused)
+{
+	int x, y;
+
+	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
+	if (down_trylock(&hdaps_sem)) {
+		mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
+		return;
+	}
+
+	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
+		goto out;
+
+	input_report_abs(&hdaps_idev, ABS_X, x - rest_x);
+	input_report_abs(&hdaps_idev, ABS_Y, y - rest_y);
+	input_sync(&hdaps_idev);
+
+	mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+
+out:
+	up(&hdaps_sem);
+}
+
 
 /* Sysfs Files */
 
@@ -517,69 +470,6 @@
 	return count;
 }
 
-static ssize_t hdaps_mousedev_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", hdaps_mousedev);
-}
-
-static ssize_t hdaps_mousedev_store(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	int enable;
-
-	if (sscanf(buf, "%d", &enable) != 1)
-		return -EINVAL;
-
-	if (enable == 1)
-		hdaps_mousedev_enable();
-	else if (enable == 0)
-		hdaps_mousedev_disable();
-	else
-		return -EINVAL;
-
-	return count;
-}
-
-static ssize_t hdaps_poll_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%lu\n", hdaps_poll_ms);
-}
-
-static ssize_t hdaps_poll_store(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	unsigned int poll;
-
-	if (sscanf(buf, "%u", &poll) != 1 || poll == 0)
-		return -EINVAL;
-	hdaps_poll_ms = poll;
-
-	return count;
-}
-
-static ssize_t hdaps_threshold_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%u\n", hdaps_mousedev_threshold);
-}
-
-static ssize_t hdaps_threshold_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	unsigned int threshold;
-
-	if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0)
-		return -EINVAL;
-	hdaps_mousedev_threshold = threshold;
-
-	return count;
-}
-
 static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL);
 static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL);
 static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL);
@@ -588,10 +478,6 @@
 static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL);
 static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store);
 static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store);
-static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store);
-static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store);
-static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show,
-		   hdaps_threshold_store);
 
 static struct attribute *hdaps_attributes[] = {
 	&dev_attr_position.attr,
@@ -601,9 +487,6 @@
 	&dev_attr_keyboard_activity.attr,
 	&dev_attr_mouse_activity.attr,
 	&dev_attr_calibrate.attr,
-	&dev_attr_mousedev.attr,
-	&dev_attr_mousedev_threshold.attr,
-	&dev_attr_mousedev_poll_ms.attr,
 	&dev_attr_invert.attr,
 	NULL,
 };
@@ -619,7 +502,7 @@
  * XXX: We should be able to return nonzero and halt the detection process.
  * But there is a bug in dmi_check_system() where a nonzero return from the
  * first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is in 2.6-mm.  Once in Linus's tree we can make
+ * I fixed this; the patch is 2.6-git.  Once in a released tree, we can make
  * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
  */
 static int hdaps_dmi_match(struct dmi_system_id *id)
@@ -668,6 +551,7 @@
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
+		HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
 		{ .ident = NULL }
 	};
 
@@ -686,24 +570,31 @@
 	if (ret)
 		goto out_region;
 
-	pdev = platform_device_register_simple("hdaps", -1, NULL, 0);
-	if (IS_ERR(pdev)) {
-		ret = PTR_ERR(pdev);
+	ret = platform_device_register(&pdev);
+	if (ret)
 		goto out_driver;
-	}
 
-	ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group);
+	ret = sysfs_create_group(&pdev.dev.kobj, &hdaps_attribute_group);
 	if (ret)
 		goto out_device;
 
-	if (hdaps_mousedev)
-		hdaps_mousedev_enable();
+	/* initial calibrate for the input device */
+	hdaps_calibrate();
+
+	/* initialize the input class */
+	input_register_device(&hdaps_idev);
+
+	/* start up our timer for the input device */
+	init_timer(&hdaps_timer);
+	hdaps_timer.function = hdaps_mousedev_poll;
+	hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
+	add_timer(&hdaps_timer);
 
 	printk(KERN_INFO "hdaps: driver successfully loaded.\n");
 	return 0;
 
 out_device:
-	platform_device_unregister(pdev);
+	platform_device_unregister(&pdev);
 out_driver:
 	driver_unregister(&hdaps_driver);
 out_region:
@@ -715,10 +606,10 @@
 
 static void __exit hdaps_exit(void)
 {
-	hdaps_mousedev_disable();
-
-	sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
-	platform_device_unregister(pdev);
+	del_timer_sync(&hdaps_timer);
+	input_unregister_device(&hdaps_idev);
+	sysfs_remove_group(&pdev.dev.kobj, &hdaps_attribute_group);
+	platform_device_unregister(&pdev);
 	driver_unregister(&hdaps_driver);
 	release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
 
@@ -728,9 +619,6 @@
 module_init(hdaps_init);
 module_exit(hdaps_exit);
 
-module_param_named(mousedev, hdaps_mousedev, bool, 0);
-MODULE_PARM_DESC(mousedev, "enable the input class device");
-
 module_param_named(invert, hdaps_invert, bool, 0);
 MODULE_PARM_DESC(invert, "invert data along each axis");
 
#1 lore raw

drivers/hwmon/hdaps.c line 306

Quoted 2 lines · Robert Love
drivers/hwmon/hdaps.c +2 -0
+/* dummy release function -- everything is static, nothing to free */
+static void hdaps_dummy_release(struct device *dev) { }

Woah, no, this is not ok. Please see my objections to this the zillion other times people have tried to do this...

Why is this static? Shouldn't it be dynamic and then your release would be able to free the memory?

drivers/hwmon/hdaps.c line 313

Quoted 7 lines

static struct device_driver hdaps_driver = {

drivers/hwmon/hdaps.c +0 -1
 	.name = "hdaps",
 	.bus = &platform_bus_type,
-	.owner = THIS_MODULE,
 	.probe = hdaps_probe,
 	.resume = hdaps_resume
 };

Why delete that? You just lost your symlink in sysfs then :(

thanks,

greg k-h

#2 lore raw
Quoted 5 lines · Greg KH

Woah, no, this is not ok. Please see my objections to this the zillion other times people have tried to do this...

Why is this static? Shouldn't it be dynamic and then your release would be able to free the memory?

The release only happens on module unload, the device is not hotpluggable, and thus we'd gain the memory anyhow.

So it is static the way any other no-need-to-dynamically-create data structure would be.

No?

Quoted 9 lines

drivers/hwmon/hdaps.c line 313

Quoted 7 lines

static struct device_driver hdaps_driver = {

drivers/hwmon/hdaps.c +0 -1
 	.name = "hdaps",
 	.bus = &platform_bus_type,
-	.owner = THIS_MODULE,
 	.probe = hdaps_probe,
 	.resume = hdaps_resume
 };

Why delete that? You just lost your symlink in sysfs then :(

I don't follow.

Wouldn't we want to be removed from sysfs?

Robert Love

#3 lore raw
Quoted 8 lines · Robert Love
Quoted 5 lines · Greg KH

Woah, no, this is not ok. Please see my objections to this the zillion other times people have tried to do this...

Why is this static? Shouldn't it be dynamic and then your release would be able to free the memory?

Quoted 7 lines

The release only happens on module unload, the device is not hotpluggable, and thus we'd gain the memory anyhow.

So it is static the way any other no-need-to-dynamically-create data structure would be.

No?

But you are reference counting a static object, right? Which isn't the nicest thing to have done. Why not just dynamically create it?

Quoted 10 lines
Quoted 9 lines

drivers/hwmon/hdaps.c line 313

Quoted 7 lines

static struct device_driver hdaps_driver = {

drivers/hwmon/hdaps.c +0 -1
 	.name = "hdaps",
 	.bus = &platform_bus_type,
-	.owner = THIS_MODULE,
 	.probe = hdaps_probe,
 	.resume = hdaps_resume
 };

Why delete that? You just lost your symlink in sysfs then :(

Quoted 3 lines

I don't follow.

Wouldn't we want to be removed from sysfs?

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

I also think you don't get the module reference counting for your driver's and devices sysfs files but haven't looked deep enough to see if this is true for your code or not. Should be easy for you to test, just open a sysfs file for your device and see if the module reference is incremented or not.

thanks,

greg k-h

#4 lore raw
Quoted 2 lines · Greg KH

But you are reference counting a static object, right? Which isn't the nicest thing to have done.

I would not say it is not "the nicest thing", it is just not necessary to do the reference counting. But we want the ref counting for other reasons, so it seems sensible.

Quoted 1 line

Why not just dynamically create it?

Seems silly to dynamically create something that we know a priori we only have one of. E.g., why dynamically create something that is not dynamic.

But it is not a big deal. If this is some rule of yours, I can kmalloc() the device_driver structure and kfree() it in my release() function. Is that what you want?

Quoted 4 lines

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

But device release == module unload.

I am not following, sadly.

Quoted 5 lines

I also think you don't get the module reference counting for your driver's and devices sysfs files but haven't looked deep enough to see if this is true for your code or not. Should be easy for you to test, just open a sysfs file for your device and see if the module reference is incremented or not.

The module reference counting is fine.

The count is elevated while one of the sysfs files is open, decremented when it closes.

Robert Love

#5 lore raw
Quoted 11 lines · Robert Love
Quoted 2 lines · Greg KH

But you are reference counting a static object, right? Which isn't the nicest thing to have done.

I would not say it is not "the nicest thing", it is just not necessary to do the reference counting. But we want the ref counting for other reasons, so it seems sensible.

Quoted 1 line

Why not just dynamically create it?

Quoted 8 lines

Seems silly to dynamically create something that we know a priori we only have one of. E.g., why dynamically create something that is not dynamic.

But it is not a big deal. If this is some rule of yours, I can kmalloc() the device_driver structure and kfree() it in my release() function. Is that what you want?

Just use platform_device_register_simple, it will allocate a platform device for you and it has a release function.

Quoted 7 lines
Quoted 4 lines

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

But device release == module unload.

For now. But I could see one changing device structure to create some attribute that could keep the object pinned in memory even after module is unloaded. It seems that we have settled on the rule that driver_unregister waits for the last refrence to drop off but devices can live longer.

Signature · 1 line
Dmitry
#6 lore raw
Quoted 5 lines · Dmitry Torokhov

For now. But I could see one changing device structure to create some attribute that could keep the object pinned in memory even after module is unloaded. It seems that we have settled on the rule that driver_unregister waits for the last refrence to drop off but devices can live longer.

Sold.

I'll use platform_device_register_simple ().

Robert Love

#7 lore raw
In reply to Robert Love
Quoted 8 lines · Robert Love
Quoted 2 lines · Greg KH

But you are reference counting a static object, right? Which isn't the nicest thing to have done.

I would not say it is not "the nicest thing", it is just not necessary to do the reference counting. But we want the ref counting for other reasons, so it seems sensible.

Like was mentioned, please use platform_device_register_simple() instead, that's what it is there for.

Quoted 6 lines
Quoted 4 lines

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

But device release == module unload.

Sure.

Quoted 1 line

I am not following, sadly.

Load the version of the driver in 2.6.14-rc1. Look in the /sys/ directory for where your driver shows up. You should see a symlink called "module" in there that points back to /sys/module/ for where your module lives. That symlink was created by the fact that you had set the .owner field in the struct device_driver.

Taking that field away like you did removes that symlink, which is not a good thing.

thanks,

greg k-h

#8 lore raw
In reply to Greg KH
Quoted 6 lines · Greg KH

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

Hmm, i have a concern WRT to that link - it is only present if driver is registered from a code compiled as a module. If driver is built-in THIS_MODULE is NULL and symlink will not be created. Hovewer /sys/modules/<module> is created regardless of whether module is a module or built-in. So the behavior is inconsistent and it looks like a replacement is needed.

Signature · 1 line
Dmitry
#9 lore raw
Quoted 8 lines · Dmitry Torokhov
Quoted 6 lines · Greg KH

No, if you have that .owner field in your driver, you get a symlink in sysfs that points from your driver to the module that controls it. You just removed that symlink, which is not what I think you wanted to have happen :(

Quoted 6 lines

Hmm, i have a concern WRT to that link - it is only present if driver is registered from a code compiled as a module. If driver is built-in THIS_MODULE is NULL and symlink will not be created. Hovewer /sys/modules/<module> is created regardless of whether module is a module or built-in. So the behavior is inconsistent and it looks like a replacement is needed.

Ok, care to come up with a suggestion of how to fix this?

thanks,

greg k-h

#10 lore raw

PATCH 1/1 hdaps driver update, updated.

In reply to Robert Love

On Wed, 2005-09-14 at 11:57 -0400, Robert Love wrote:

Mr Morton,

Quoted 10 lines

The hdaps driver landed in 2.6.14-rc1.

The attached patch updates the driver:

- Remove the relative input device
- Add an absolute input device
- Misc. cleanup and bug fixing

The patch is sizable due to the cleanup from removing the relative input device (net -112 lines).

Updated patch, which does not remove

- the use of platform_device_register_simple()
- the module owner from the device_driver structure

and net line change is now -126, so who can complain?

Highest regards and cordials,

Robert Love

Updates to the hdaps driver.

 drivers/hwmon/hdaps.c |  356 ++++++++++++++++----------------------------------
 1 files changed, 118 insertions(+), 238 deletions(-)
drivers/hwmon/hdaps.c +118 -238
diff -urN linux-2.6.14-rc1/drivers/hwmon/hdaps.c linux/drivers/hwmon/hdaps.c
@@ -5,10 +5,10 @@
  * Copyright (C) 2005 Jesper Juhl <[email protected]>
  *
  * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad
- * T41, T42, T43, R51, and X40, at least.  It provides a basic two-axis
- * accelerometer and other data, such as the device's temperature.
+ * T41, T42, T43, R50, R50p, R51, and X40, at least.  It provides a basic
+ * two-axis accelerometer and other data, such as the device's temperature.
  *
- * Based on the document by Mark A. Smith available at
+ * This driver is based on the document by Mark A. Smith available at
  * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial
  * and error.
  *
@@ -36,12 +36,7 @@
 #include <asm/io.h>
 
 #define HDAPS_LOW_PORT		0x1600	/* first port used by hdaps */
-#define HDAPS_NR_PORTS		0x30	/* 0x1600 - 0x162f */
-
-#define STATE_FRESH		0x50	/* accelerometer data is fresh */
-
-#define REFRESH_ASYNC		0x00	/* do asynchronous refresh */
-#define REFRESH_SYNC		0x01	/* do synchronous refresh */
+#define HDAPS_NR_PORTS		0x30	/* number of ports: 0x1600 - 0x162f */
 
 #define HDAPS_PORT_STATE	0x1611	/* device state */
 #define HDAPS_PORT_YPOS		0x1612	/* y-axis position */
@@ -53,7 +48,7 @@
 #define HDAPS_PORT_UNKNOWN	0x161c	/* what is this? */
 #define HDAPS_PORT_KMACT	0x161d	/* keyboard or mouse activity */
 
-#define HDAPS_READ_MASK		0xff	/* some reads have the low 8 bits set */
+#define STATE_FRESH		0x50	/* accelerometer data is fresh */
 
 #define KEYBD_MASK		0x20	/* set if keyboard activity */
 #define MOUSE_MASK		0x40	/* set if mouse activity */
@@ -63,12 +58,11 @@
 #define INIT_TIMEOUT_MSECS	4000	/* wait up to 4s for device init ... */
 #define INIT_WAIT_MSECS		200	/* ... in 200ms increments */
 
-static struct platform_device *pdev;
-static struct input_dev hdaps_idev;
+#define HDAPS_POLL_PERIOD	(HZ/20)	/* poll for input every 1/20s */
+#define HDAPS_INPUT_FUZZ	4	/* input event threshold */
+
 static struct timer_list hdaps_timer;
-static unsigned int hdaps_mousedev_threshold = 4;
-static unsigned long hdaps_poll_ms = 50;
-static unsigned int hdaps_mousedev;
+static struct platform_device *pdev;
 static unsigned int hdaps_invert;
 static u8 km_activity;
 static int rest_x;
@@ -81,14 +75,14 @@
  */
 static inline u8 __get_latch(u16 port)
 {
-	return inb(port) & HDAPS_READ_MASK;
+	return inb(port) & 0xff;
 }
 
 /*
- * __check_latch - Check a port latch for a given value.  Callers must hold
- * hdaps_sem.  Returns zero if the port contains the given value.
+ * __check_latch - Check a port latch for a given value.  Returns zero if the
+ * port contains the given value.  Callers must hold hdaps_sem.
  */
-static inline unsigned int __check_latch(u16 port, u8 val)
+static inline int __check_latch(u16 port, u8 val)
 {
 	if (__get_latch(port) == val)
 		return 0;
@@ -99,7 +93,7 @@
  * __wait_latch - Wait up to 100us for a port latch to get a certain value,
  * returning zero if the value is obtained.  Callers must hold hdaps_sem.
  */
-static unsigned int __wait_latch(u16 port, u8 val)
+static int __wait_latch(u16 port, u8 val)
 {
 	unsigned int i;
 
@@ -109,59 +103,42 @@
 		udelay(5);
 	}
 
-	return -EINVAL;
+	return -EIO;
 }
 
 /*
- * __device_refresh - Request a refresh from the accelerometer.
- *
- * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait.
- * Returns zero if successful and nonzero on error.
- *
- * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is
- * not up-to-date.  Always returns zero.
- *
- * Callers must hold hdaps_sem.
+ * __device_refresh - request a refresh from the accelerometer.  Does not wait
+ * for refresh to complete.  Callers must hold hdaps_sem.
  */
-static int __device_refresh(unsigned int sync)
+static void __device_refresh(void)
 {
-	u8 state;
-
-	udelay(100);
-
-	state = inb(0x1604);
-	if (state == STATE_FRESH)
-		return 0;
-
-	outb(0x11, 0x1610);
-	outb(0x01, 0x161f);
-	if (sync == REFRESH_ASYNC)
-		return 0;
+	udelay(200);
+	if (inb(0x1604) != STATE_FRESH) {
+		outb(0x11, 0x1610);
+		outb(0x01, 0x161f);
+	}
+}
 
+/*
+ * __device_refresh_sync - request a synchronous refresh from the
+ * accelerometer.  We wait for the refresh to complete.  Returns zero if
+ * successful and nonzero on error.  Callers must hold hdaps_sem.
+ */
+static int __device_refresh_sync(void)
+{
+	__device_refresh();
 	return __wait_latch(0x1604, STATE_FRESH);
 }
 
 /*
- * __device_complete - Indicate to the accelerometer that we are done reading
+ * __device_complete - indicate to the accelerometer that we are done reading
  * data, and then initiate an async refresh.  Callers must hold hdaps_sem.
  */
 static inline void __device_complete(void)
 {
 	inb(0x161f);
 	inb(0x1604);
-	__device_refresh(REFRESH_ASYNC);
-}
-
-static int __hdaps_readb_one(unsigned int port, u8 *val)
-{
-	/* do a sync refresh -- we need to be sure that we read fresh data */
-	if (__device_refresh(REFRESH_SYNC))
-		return -EIO;
-
-	*val = inb(port);
-	__device_complete();
-
-	return 0;
+	__device_refresh();
 }
 
 /*
@@ -174,17 +151,26 @@
 	int ret;
 
 	down(&hdaps_sem);
-	ret = __hdaps_readb_one(port, val);
-	up(&hdaps_sem);
 
+	/* do a sync refresh -- we need to be sure that we read fresh data */
+	ret = __device_refresh_sync();
+	if (ret)
+		goto out;
+
+	*val = inb(port);
+	__device_complete();
+
+out:
+	up(&hdaps_sem);
 	return ret;
 }
 
+/* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */
 static int __hdaps_read_pair(unsigned int port1, unsigned int port2,
 			     int *x, int *y)
 {
 	/* do a sync refresh -- we need to be sure that we read fresh data */
-	if (__device_refresh(REFRESH_SYNC))
+	if (__device_refresh_sync())
 		return -EIO;
 
 	*y = inw(port2);
@@ -217,11 +203,13 @@
 	return ret;
 }
 
-/* initialize the accelerometer */
+/*
+ * hdaps_device_init - initialize the accelerometer.  Returns zero on success
+ * and negative error code on failure.  Can sleep.
+ */
 static int hdaps_device_init(void)
 {
-	unsigned int total_msecs = INIT_TIMEOUT_MSECS;
-	int ret = -ENXIO;
+	int total, ret = -ENXIO;
 
 	down(&hdaps_sem);
 
@@ -231,8 +219,10 @@
 		goto out;
 
 	/*
-	 * The 0x03 value appears to only work on some thinkpads, such as the
-	 * T42p.  Others return 0x01.
+	 * Most ThinkPads return 0x01.
+	 *
+	 * Others--namely the R50p, T41p, and T42p--return 0x03.  These laptops
+	 * have "inverted" axises.
 	 *
 	 * The 0x02 value occurs when the chip has been previously initialized.
 	 */
@@ -267,24 +257,23 @@
 	outb(0x01, 0x161f);
 	if (__wait_latch(0x161f, 0x00))
 		goto out;
-	if (__device_refresh(REFRESH_SYNC))
+	if (__device_refresh_sync())
 		goto out;
 	if (__wait_latch(0x1611, 0x00))
 		goto out;
 
 	/* we have done our dance, now let's wait for the applause */
-	while (total_msecs > 0) {
-		u8 ignored;
+	for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
+		int x, y;
 
 		/* a read of the device helps push it into action */
-		__hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored);
+		__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y);
 		if (!__wait_latch(0x1611, 0x02)) {
 			ret = 0;
 			break;
 		}
 
 		msleep(INIT_WAIT_MSECS);
-		total_msecs -= INIT_WAIT_MSECS;
 	}
 
 out:
@@ -293,96 +282,6 @@
 }
 
 
-/* Input class stuff */
-
-/*
- * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem.
- */
-static void hdaps_calibrate(void)
-{
-	int x, y;
-
-	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-		return;
-
-	rest_x = x;
-	rest_y = y;
-}
-
-static void hdaps_mousedev_poll(unsigned long unused)
-{
-	int x, y;
-
-	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
-	if (down_trylock(&hdaps_sem)) {
-		mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms));
-		return;
-	}
-
-	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
-		goto out;
-
-	x -= rest_x;
-	y -= rest_y;
-	if (abs(x) > hdaps_mousedev_threshold)
-		input_report_rel(&hdaps_idev, REL_X, x);
-	if (abs(y) > hdaps_mousedev_threshold)
-		input_report_rel(&hdaps_idev, REL_Y, y);
-	input_sync(&hdaps_idev);
-
-	mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms));
-
-out:
-	up(&hdaps_sem);
-}
-
-/*
- * hdaps_mousedev_enable - enable the input class device.  Can sleep.
- */
-static void hdaps_mousedev_enable(void)
-{
-	down(&hdaps_sem);
-
-	/* calibrate the device before enabling */
-	hdaps_calibrate();
-
-	/* initialize the input class */
-	init_input_dev(&hdaps_idev);
-	hdaps_idev.dev = &pdev->dev;
-	hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
-	hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
-	hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT);
-	input_register_device(&hdaps_idev);
-
-	/* start up our timer */
-	init_timer(&hdaps_timer);
-	hdaps_timer.function = hdaps_mousedev_poll;
-	hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms);
-	add_timer(&hdaps_timer);
-
-	hdaps_mousedev = 1;
-
-	up(&hdaps_sem);
-
-	printk(KERN_INFO "hdaps: input device enabled.\n");
-}
-
-/*
- * hdaps_mousedev_disable - disable the input class device.  Caller must hold
- * hdaps_sem.
- */
-static void hdaps_mousedev_disable(void)
-{
-	down(&hdaps_sem);
-	if (hdaps_mousedev) {
-		hdaps_mousedev = 0;
-		del_timer_sync(&hdaps_timer);
-		input_unregister_device(&hdaps_idev);
-	}
-	up(&hdaps_sem);
-}
-
-
 /* Device model stuff */
 
 static int hdaps_probe(struct device *dev)
@@ -412,6 +311,49 @@
 	.resume = hdaps_resume
 };
 
+/* Input class stuff */
+
+static struct input_dev hdaps_idev = {
+	.name = "hdaps",
+	.evbit = { BIT(EV_ABS) },
+	.absbit = { BIT(ABS_X) | BIT(ABS_Y) },
+	.absmin  = { [ABS_X] = -256, [ABS_Y] = -256 },
+	.absmax  = { [ABS_X] = 256, [ABS_Y] = 256 },
+	.absfuzz = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+	.absflat = { [ABS_X] = HDAPS_INPUT_FUZZ, [ABS_Y] = HDAPS_INPUT_FUZZ },
+};
+
+/*
+ * hdaps_calibrate - Set our "resting" values.  Callers must hold hdaps_sem.
+ */
+static void hdaps_calibrate(void)
+{
+	__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y);
+}
+
+static void hdaps_mousedev_poll(unsigned long unused)
+{
+	int x, y;
+
+	/* Cannot sleep.  Try nonblockingly.  If we fail, try again later. */
+	if (down_trylock(&hdaps_sem)) {
+		mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD);
+		return;
+	}
+
+	if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y))
+		goto out;
+
+	input_report_abs(&hdaps_idev, ABS_X, x - rest_x);
+	input_report_abs(&hdaps_idev, ABS_Y, y - rest_y);
+	input_sync(&hdaps_idev);
+
+	mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD);
+
+out:
+	up(&hdaps_sem);
+}
+
 
 /* Sysfs Files */
 
@@ -517,69 +459,6 @@
 	return count;
 }
 
-static ssize_t hdaps_mousedev_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", hdaps_mousedev);
-}
-
-static ssize_t hdaps_mousedev_store(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	int enable;
-
-	if (sscanf(buf, "%d", &enable) != 1)
-		return -EINVAL;
-
-	if (enable == 1)
-		hdaps_mousedev_enable();
-	else if (enable == 0)
-		hdaps_mousedev_disable();
-	else
-		return -EINVAL;
-
-	return count;
-}
-
-static ssize_t hdaps_poll_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%lu\n", hdaps_poll_ms);
-}
-
-static ssize_t hdaps_poll_store(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	unsigned int poll;
-
-	if (sscanf(buf, "%u", &poll) != 1 || poll == 0)
-		return -EINVAL;
-	hdaps_poll_ms = poll;
-
-	return count;
-}
-
-static ssize_t hdaps_threshold_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%u\n", hdaps_mousedev_threshold);
-}
-
-static ssize_t hdaps_threshold_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	unsigned int threshold;
-
-	if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0)
-		return -EINVAL;
-	hdaps_mousedev_threshold = threshold;
-
-	return count;
-}
-
 static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL);
 static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL);
 static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL);
@@ -588,10 +467,6 @@
 static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL);
 static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store);
 static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store);
-static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store);
-static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store);
-static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show,
-		   hdaps_threshold_store);
 
 static struct attribute *hdaps_attributes[] = {
 	&dev_attr_position.attr,
@@ -601,9 +476,6 @@
 	&dev_attr_keyboard_activity.attr,
 	&dev_attr_mouse_activity.attr,
 	&dev_attr_calibrate.attr,
-	&dev_attr_mousedev.attr,
-	&dev_attr_mousedev_threshold.attr,
-	&dev_attr_mousedev_poll_ms.attr,
 	&dev_attr_invert.attr,
 	NULL,
 };
@@ -619,7 +491,7 @@
  * XXX: We should be able to return nonzero and halt the detection process.
  * But there is a bug in dmi_check_system() where a nonzero return from the
  * first match will result in a return of failure from dmi_check_system().
- * I fixed this; the patch is in 2.6-mm.  Once in Linus's tree we can make
+ * I fixed this; the patch is 2.6-git.  Once in a released tree, we can make
  * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1.
  */
 static int hdaps_dmi_match(struct dmi_system_id *id)
@@ -668,6 +540,7 @@
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
 		HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
+		HDAPS_DMI_MATCH_NORMAL("ThinkPad X41 Tablet"),
 		{ .ident = NULL }
 	};
 
@@ -696,8 +569,18 @@
 	if (ret)
 		goto out_device;
 
-	if (hdaps_mousedev)
-		hdaps_mousedev_enable();
+	/* initial calibrate for the input device */
+	hdaps_calibrate();
+
+	/* initialize the input class */
+	hdaps_idev.dev = &pdev->dev;
+	input_register_device(&hdaps_idev);
+
+	/* start up our timer for the input device */
+	init_timer(&hdaps_timer);
+	hdaps_timer.function = hdaps_mousedev_poll;
+	hdaps_timer.expires = jiffies + HDAPS_POLL_PERIOD;
+	add_timer(&hdaps_timer);
 
 	printk(KERN_INFO "hdaps: driver successfully loaded.\n");
 	return 0;
@@ -715,8 +598,8 @@
 
 static void __exit hdaps_exit(void)
 {
-	hdaps_mousedev_disable();
-
+	del_timer_sync(&hdaps_timer);
+	input_unregister_device(&hdaps_idev);
 	sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group);
 	platform_device_unregister(pdev);
 	driver_unregister(&hdaps_driver);
@@ -728,9 +611,6 @@
 module_init(hdaps_init);
 module_exit(hdaps_exit);
 
-module_param_named(mousedev, hdaps_mousedev, bool, 0);
-MODULE_PARM_DESC(mousedev, "enable the input class device");
-
 module_param_named(invert, hdaps_invert, bool, 0);
 MODULE_PARM_DESC(invert, "invert data along each axis");