Skip to contentSkip to conversation

USB on nForce4 board only working with pci=routeirq

DISCUSSION Florian Engelhardt 1 participant 1 message Sep 26, 2005

lore
Share & tools
lore
#0 lore raw

Hello,

i own a nForce4 mainboard from elitegroup. It has USB 1.1 and 2.0. If i start the computer normal with my 2.6.13 kernel i get the following:

Sep 25 10:12:54 discovery ohci_hcd 0000:00:02.0: OHCI Host Controller
Sep 25 10:12:54 discovery ohci_hcd 0000:00:02.0: USB HC takeover failed! 
(BIOS/SMM bug)
Sep 25 10:12:54 discovery ohci_hcd 0000:00:02.0: can't reset
Sep 25 10:12:54 discovery ACPI: PCI interrupt for device 0000:00:02.0 disabled
Sep 25 10:12:54 discovery ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -16
Sep 25 10:12:54 discovery ohci_hcd: probe of 0000:00:02.0 failed with error -16

And non of my USB-devices is wokring anymore.
I than switched to 2.6.14-rc2-mm1, but the same behavior.
I tried to parse pci=routeirq to the kernel, and than it was wokring again.

It worked perfect, also without pci=routeirq until 25th of september. I updated the bios, but that was one month ago, and is was using my usb devices since then with no problems, so i don´t know, what couses this problem now.

Kind Regards

Florian Engelhardt

PS: Please cc me, couse i am not on the list.