Skip to contentSkip to conversation

truncate(2) sometimes updates ctime and sometimes ctime and mtime!

PATCH In review Anton Altaparmakov 3 participants 5 messages Sep 30, 2005 – Oct 4, 2005 VFS

lore
Share & tools
lore
#0 lore raw

Hi,

There is an inconsistency in the way truncate works which was introduced (relatively) recently.

fs/open.c::sys_truncate
-> do_sys_truncate

    -> do_truncate does:

        newattrs.ia_size = length;
        newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;

        down(&dentry->d_inode->i_sem);
        err = notify_change(dentry, &newattrs);
        up(&dentry->d_inode->i_sem);

This changes the ctime only.

But fs/attr.c::notify_change
-> inode_setattr [happens when !inode->i_op || !inode->i_op->setattr]

which does:

        if (ia_valid & ATTR_SIZE) {
                if (attr->ia_size != i_size_read(inode)) {
                        error = vmtruncate(inode, attr->ia_size);
                        if (error || (ia_valid == ATTR_SIZE))
                                goto out;
                } else {
                        /*
                         * We skipped the truncate but must still update
                         * timestamps
                         */
                        ia_valid |= ATTR_MTIME|ATTR_CTIME;
                }
        }

Which changes both mtime and ctime when the size does not change.

Also, the man page for stat(2) says:

<quote>
The field st_mtime is changed by file modifications, e.g. by mknod(2), truncate(2), utime(2) and write(2) (of more than zero bytes). Moreover, st_mtime of a directory is changed by the creation or deletion of files in that directory. The st_mtime field is not changed for changes in owner, group, hard link count, or mode.
</quote>

So it suggests mtime is always modified on truncate.

So what is correct? mtime and ctime or just ctime? If just ctime, Linus please apply below patch to remove the superfluous ATTR_MTIME from fs/attr.c::inode_setattr().

Also someone ought to fix the man pages if they are not fixed already (mine are man-pages-2.01-2 from SUSE 9.3)...

Best regards,

Anton

Signature · 15 lines
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/

--- ntfs-2.6/fs/attr.c.old	2005-09-30 16:00:29.000000000 +0100
+++ ntfs-2.6/fs/attr.c	2005-09-30 16:00:47.000000000 +0100
@@ -79,7 +79,7 @@ int inode_setattr(struct inode * inode, 
 			 * We skipped the truncate but must still update
 			 * timestamps
 			 */
-			ia_valid |= ATTR_MTIME|ATTR_CTIME;
+			ia_valid |= ATTR_CTIME;
 		}
 	}
#1 lore raw
Quoted 15 lines · Anton Altaparmakov

There is an inconsistency in the way truncate works which was introduced (relatively) recently.

fs/open.c::sys_truncate
-> do_sys_truncate

    -> do_truncate does:

        newattrs.ia_size = length;
        newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;

        down(&dentry->d_inode->i_sem);
        err = notify_change(dentry, &newattrs);
        up(&dentry->d_inode->i_sem);
Quoted 1 line

This changes the ctime only.

Hmm.. That looks wrong, partly because I don't think it should even set ATTR_CTIME _either_. However, I don't see any recent changes to that code, so it must have been logn for a long time. That line in do_truncate() has been like that since at _least_ 2002.

So what changed to make you notice?

The _code_ actually expects the low-level filesystem to just do it when it does the actual truncate itself. That's certainly what ext3 does, for example.

A comment or two to that effect might be useful, though.

In other words: some attributes are "implicit". For example, mtime is supposed to be set automatically by the filesystem whenever it sees a write. The VFS layer will _not_ do a "inode state notify" event for that.

The same is true of truncation.

But I agree that it's inconsistent. Anybody have any deep opinions?

Linus

#2 lore raw
Quoted 15 lines · Linus Torvalds
Quoted 14 lines · Anton Altaparmakov

There is an inconsistency in the way truncate works which was introduced (relatively) recently.

fs/open.c::sys_truncate
-> do_sys_truncate

    -> do_truncate does:

        newattrs.ia_size = length;
        newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;

        down(&dentry->d_inode->i_sem);
        err = notify_change(dentry, &newattrs);
        up(&dentry->d_inode->i_sem);
Quoted 6 lines
Quoted 1 line

This changes the ctime only.

Hmm.. That looks wrong, partly because I don't think it should even set ATTR_CTIME _either_. However, I don't see any recent changes to that code, so it must have been logn for a long time. That line in do_truncate() has been like that since at _least_ 2002.

Indeed. What _has_ changed recently is that IIRC do_truncate used to set ATTR_SIZE | ATTR_CTIME | ATTR_MTIME at which point the two were consistent. But (relatively) recently someone removed the ATTR_MTIME from do_truncate and forgot to remove it from inode_setattr...

Quoted 1 line

So what changed to make you notice?

I have finished coding the initial cut of ntfs_truncate() (regular files only, i.e. uncompressed, unencrypted, and not-attribute-list-attribute-containing). (-:

Now I am at the testing it stage and I was doing:

$ stat ntfs/file
$ truncate ntfs/file <someval>
$ stat ntfs/file

And noticed that the ctime was chaning but not the mtime so I read the man page which suggested mtime ought to change so I had a quick look at relevant kernel code and the inconsistency stared me in the face. (-;

Quoted 3 lines

The _code_ actually expects the low-level filesystem to just do it when it does the actual truncate itself. That's certainly what ext3 does, for example.

Ah, I thought the VFS took care of _all_ {a,c,m} time changes and we filesystem developers only ever had to write the changed times to disk...

Obviously I was wrong...

I will have a look at ext2/3.

Quoted 1 line

A comment or two to that effect might be useful, though.

Indeed, it would be useful for unsuspecting fs developers like me. (-;

Quoted 3 lines

In other words: some attributes are "implicit". For example, mtime is supposed to be set automatically by the filesystem whenever it sees a write. The VFS layer will _not_ do a "inode state notify" event for that.

Right. I seem to remember this being different some time ago. IIRC the kernel did update {a,m,c}time in many places...

Quoted 3 lines

The same is true of truncation.

But I agree that it's inconsistent. Anybody have any deep opinions?

I certainly don't. It just should be consistent. (-:

Best regards,

Anton

Signature · 4 lines
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/
#3 lore raw

PATCH 1/1 Do not set ATTR_CTIME in do_truncate(). - was: Re: truncate(2) sometimes updates ctime and sometimes ctime and mtime!

Hi Linus,

Here is a (tested) patch to remove the setting of ATTR_CTIME in do_truncate() as you suggested.

---

Quoted 8 lines · Linus Torvalds
Quoted 7 lines · Anton Altaparmakov

There is an inconsistency in the way truncate works which was introduced (relatively) recently.

fs/open.c::sys_truncate
-> do_sys_truncate

    -> do_truncate does:
Quoted 7 lines
Quoted 7 lines
        newattrs.ia_size = length;
        newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;

Hmm.. That looks wrong, partly because I don't think it should even set ATTR_CTIME _either_. However, I don't see any recent changes to that code, so it must have been logn for a long time. That line in do_truncate() has been like that since at _least_ 2002.

Having gone through looking at ext2/3 and having made ntfs_truncate() behave the same way as ext2/3_truncate() wrt m/ctime, I now agree with you. do_truncate() should only set ATTR_SIZE, not ATTR_CTIME. The file system will set ATTR_CTIME and ATTR_MTIME anyway so it's a waste for the attribute to also set ATTR_CTIME. That way it happens twice.

Below is a patch to remove it...

Best regards,

Anton

Signature · 4 lines
Anton Altaparmakov <aia21 at cam.ac.uk> (replace at with @)
Unix Support, Computing Service, University of Cambridge, CB2 3QH, UK
Linux NTFS maintainer / IRC: #ntfs on irc.freenode.net
WWW: http://linux-ntfs.sf.net/ & http://www-stu.christs.cam.ac.uk/~aia21/
fs/open.c +1 -1
@@ -204,7 +204,7 @@ int do_truncate(struct dentry *dentry, l
 		return -EINVAL;
 
 	newattrs.ia_size = length;
-	newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
+	newattrs.ia_valid = ATTR_SIZE;
 
 	down(&dentry->d_inode->i_sem);
 	err = notify_change(dentry, &newattrs);
#4 lore raw

Re: [PATCH 2.6] Do not set ATTR_CTIME in do_truncate(). - was: Re: truncate(2) sometimes updates ctime and sometimes ctime and mtime!

Quoted 2 lines

Here is a (tested) patch to remove the setting of ATTR_CTIME in do_truncate() as you suggested.

This is still inconsistent: all other "setattr" operations (chmod, chown, chgrp, utime) still set ATTR_CTIME.

I think either ATTR_CTIME should be implicit in ->setattr() in which case you should remove it in all those cases, or leave it as it is.

Miklos