Resend: [PATCH]:correct flash base address in README.mpc83xx to be the same as that in source code

Hi,
Sorry, have to resend, the patch missed some lines. Here it is. Please ignore the previous one. Sorry for inconvenience.

**********************************************************************************
This is a patch for MPC8349E ADS board readme in README.mpc83xxads. This patch corrects u-boot base address described in the README.mpc83xxads to be the same as text base set in the source code.

Log Entry:

* Patched by Neil Chu, Oct 2005
Correct the flash base address in README.mpc83xx so that it is the
same as TEXT base address
setting in u-boot source code.
***********************************************************************************

---
diff -Nur u-boot-1.1.3/doc/README.mpc83xxads u-boot-1.1.3- after/doc/README.mpc83xxads
--- u-boot-1.1.3/doc/README.mpc83xxads 2005-08-14 07:53:35.000000000 +0800
+++ u-boot-1.1.3-after/doc/README.mpc83xxads 2005-10-14
10:34:19.871711464 +0800
@@ -83,15 +83,15 @@
5.1 Reflash U-boot Image using U-boot

     tftp 10000 u-boot.bin
-    protect off fe000000 fe09ffff
-    erase fe000000 fe09ffff
+    protect off all
+    erase fe700000 fe73ffff

- cp.b 10000 fe000000 xxxx
+ cp.b 10000 fe700000 xxxx
or
- cp.b 10000 fe000000 a0000
+ cp.b 10000 fe700000 40000

-You might have to supply the correct byte count for 'xxxx' from -the TFTP. Maybe a0000 will work too, that corresponds to the +You might have to supply the correct byte count in hex for 'xxxx' from +the TFTP. Maybe 40000 will work too, that corresponds to the erased sectors.