Skip to contentSkip to conversation

Ho do i manage NAT'ed egress bandwidht?

LARTC Joost Kraaijeveld 3 participants 3 messages Oct 20, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I have a Debian based NAT router. How can I manage upstream egress bandwidth based on the LAN ipadress in the network below? My goal is that host1 get a minumum of 10Mbit up/down and host2 gets a minimum of 90Mbit up/down, both max 100Mbit up/down?

           targethost
         172.16.255.254
                |
                |
           172.16.0.1
            natrouter
          172.31.255.254          
                |
                |
    + ----------------------+
    |                       |

172.31.0.1 172.31.0.2
host1 host2

TIA

Signature · 16 lines
Groeten,

Joost Kraaijeveld
Askesis B.V.
Molukkenstraat 14
6524NB Nijmegen
tel: 024-3888063 / 06-51855277
fax: 024-3608416
e-mail: [email protected]
web: www.askesis.nl 


_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
#1 lore raw
Quoted 1 line

Hi,

Hi

Quoted 6 lines

I have a Debian based NAT router. How can I manage upstream egress bandwidth based on the LAN ipadress in the network below? My goal is that host1 get a minumum of 10Mbit up/down and host2 gets a minimum of 90Mbit up/down, both max 100Mbit up/down?

You can use iptables MARK target in PREROUTING or FORWARD chain of nat table in conjuction with a fw filter (see tc filter help).

Marek Kierdelewicz
KoBa ISP
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to Joost Kraaijeveld

Hi Joost,

This sounds like a situation where you would probably use HTB to shape your bandwidth.

You can search the archives for info on HTB, read the LARTC pages but you may find more specific information relating to your situation at the below links.

http://luxik.cdi.cz/%7Edevik/qos/htb/

Or you can just use this ready made HTB script on your server which should suit your problem description without much extra work on your behalf.
http://sourceforge.net/projects/htbinit/

Regards,
Lee

Quoted 18 lines · Joost Kraaijeveld

Hi,

I have a Debian based NAT router. How can I manage upstream egress bandwidth based on the LAN ipadress in the network below? My goal is that host1 get a minumum of 10Mbit up/down and host2 gets a minimum of 90Mbit up/down, both max 100Mbit up/down?

           targethost
         172.16.255.254


           172.16.0.1
            natrouter
          172.31.255.254


    + ----------------------+
Quoted 5 lines

172.31.0.1 172.31.0.2
host1 host2

TIA

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc