Battery not visible?
Hi all,
I just bought a new laptop, an Acer Aspire 3613WLMI,
I have installed Fedora Core 4 on it (after erasing the XP-Home that it came with).
I seem to have a problem with ACPI, the battery is not visible. i.e. ls /proc/acpi/battery is empty, and the gnome charge monitor icon reports battery status unknown.. it does however correctly report whether the AC adapter is plugged in or not.
"dmesg | grep ACPI" reports some errors, but I have no idea what they mean.. I have attached a text file with my output.
Any help/ideas appreciated,
Thanks!
Signature · 2 lines
Daniel Pekelharing <[email protected]>
BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data)
BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS)
ACPI: RSDP (v000 PTLTD ) @ 0x000f7a10
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1f6e5e41
ACPI: FADT (v002 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9e78
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9efc
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f6e9fd8
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9f9c
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1f6e6078
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1f6e5e7d
ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: setting ELCR to 0200 (from 0c00)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
ACPI: Embedded Controller [EC0] (gpe 23)
ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node c146ad60), AE_TIME
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node c146ad60), AE_TIMEpnp: PnP ACPI init
pnp: PnP ACPI: found 7 devices
PCI: Using ACPI for IRQ routing
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node c1465b60), AE_TIME
ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1138: *** Error: Method execution failed [\_TZ_.TZS1._TMP] (Node c1465a60), AE_TIME
ACPI: Thermal Zone [TZS1] (26 C)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI wakeup devices:
ACPI: (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
ACPI: AC Adapter [ADP1] (off-line)
ACPI-0405: *** Error: Handler for [EmbeddedControl] returned AE_TIME
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node c146ad40), AE_TIME
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
The usual fix for AE_TIME errors: try booting latest kernel.org 2.6.xx kernel with proper configuration for your hardware, and set kernel boot option "ec_burst=1".
HTH!
Quoted 14 lines · --- Daniel Pekelharing
Hi all,
I just bought a new laptop, an Acer Aspire 3613WLMI,
I have installed Fedora Core 4 on it (after erasing the XP-Home that it
came with).I seem to have a problem with ACPI, the battery is not visible. i.e. ls
/proc/acpi/batteryis empty, and the gnome charge monitor icon
reports battery status unknown.. it does however correctly report whether the AC adapter is plugged in or not.
Quoted 10 lines
"dmesg | grep ACPI" reports some errors, but I have no idea what they mean.. I have attached a text file with my output.
Any help/ideas appreciated,
Thanks!
Signature · 2 lines
Daniel Pekelharing <[email protected]>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines · Michael Doube
Hi Daniel
The fedora RPM kernel 2.6.13-1526_FC4 works on my Aspire 3023 WLMi, in conjunction with ec_burst=1 kernel option.
It may well work for you, too.
Quoted 3 lines · On Thu, 2005-10-20 at 14:16 -0700, foo_bar_baz_boo-acpi-/E1597aS9LQAvxtiuMwx3w@…
The usual fix for
AE_TIMEerrors: try booting latest kernel.org 2.6.xx kernel with proper configuration for your hardware, and set kernel boot option "ec_burst=1".
Thanks guys... I'll give it a try as soon as get time to update my kernel.
Signature · 9 lines
Daniel Pekelharing <[email protected]> ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl