Skip to contentSkip to conversation

Problems with current file descriptor

DISCUSSION Sergio Paracuellos 3 participants 7 messages Oct 26, 2005 – Oct 27, 2005 VFS

lore
Share & tools
lore
#0 lore raw

Hi all,

I have problems to know whats is the current file descriptor.

"task_struct" have a files_struct structure which contains all files for a process in "fd". If I want to get the complete path for one of them, How can I know what is the correct one in fd_array?

I suppose is something like:

path = d_path(task->files->fd[x]->f_dentry,
task->files->fd[x]->f_vfsmnt, buf, PAGE_SIZE);

But I don't know how to know this x for my correct file (for example the last file I used).

Thanks in advance...

Cheers,
Sergio

#1 lore raw
Quoted 5 lines · Sergio Paracuellos

I have problems to know whats is the current file descriptor.

"task_struct" have a files_struct structure which contains all files for a process in "fd". If I want to get the complete path for one of them,

A file descriptor doesn't have an associated patch. Think about sockets. Think about unlinked files. etc.

Jörn

Signature · 7 lines
When in doubt, punt.  When somebody actually complains, go back and fix it...
The 90% solution is a good thing.
-- Rob Landley
-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw
In reply to Sergio Paracuellos

2005/10/26, Sergio Paracuellos <[email protected]>:

Quoted 8 lines

Hi all,

I have problems to know whats is the current file descriptor.

"task_struct" have a files_struct structure which contains all files for a process in "fd". If I want to get the complete path for one of them, How can I know what is the correct one in fd_array?

Quoted 7 lines

I suppose is something like:

path = d_path(task->files->fd[x]->f_dentry,
task->files->fd[x]->f_vfsmnt, buf, PAGE_SIZE);

But I don't know how to know this x for my correct file (for example the last file I used).

current file ?what is meaning?
for exmaple ,you opened 3 file, file1,file2, file3. which is current file?

#3 lore raw
Quoted 11 lines · winter

2005/10/26, Sergio Paracuellos <[email protected]>:

Quoted 10 lines

Hi all,

I have problems to know whats is the current file descriptor.

"task_struct" have a files_struct structure which contains all files for a process in "fd". If I want to get the complete path for one of them, How can I know what is the correct one in fd_array?

I suppose is something like:

Quoted 7 lines
Quoted 5 lines

path = d_path(task->files->fd[x]->f_dentry,
task->files->fd[x]->f_vfsmnt, buf, PAGE_SIZE);

But I don't know how to know this x for my correct file (for example the last file I used).

current file ?what is meaning?
for exmaple ,you opened 3 file, file1,file2, file3. which is current file?

Sorry, I want the last file I used. For example if I just have done "cat foobar" the file I want is this.

Thanks in advance,

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw

2005/10/27, Sergio Paracuellos <[email protected]>:

Quoted 6 lines
Quoted 2 lines

current file ?what is meaning?
for exmaple ,you opened 3 file, file1,file2, file3. which is current file?

Sorry, I want the last file I used. For example if I just have done "cat foobar" the file I want is this.

if you used the command "cat foobar", the linux kernel's do the following 3 phase for you:
1. open() --> sys_open() // in this phase, the filp struct is
create and save at

                                        // current->files->fd[x]. the x=fd.

2. read() --> sys_read() // in this phase, read file's data, the
fd is not changed.
3. close() --> sys_close() // in this phase, free the filp struct.
the result is

                                       // current->files->fd[fd] = 0.

so it is, kernel can not save the last file which you opend. which phase you want get the path at?

#5 lore raw
Quoted 11 lines · winter

2005/10/27, Sergio Paracuellos <[email protected]>:

Quoted 6 lines
Quoted 2 lines

current file ?what is meaning?
for exmaple ,you opened 3 file, file1,file2, file3. which is current file?

Sorry, I want the last file I used. For example if I just have done "cat foobar" the file I want is this.

if you used the command "cat foobar", the linux kernel's do the following 3 phase for you:
1. open() --> sys_open() // in this phase, the filp struct is
create and save at

Quoted 8 lines
                                        // current->files->fd[x]. the x=fd.

2. read() --> sys_read() // in this phase, read file's data, the
fd is not changed.
3. close() --> sys_close() // in this phase, free the filp struct.
the result is

                                       // current->files->fd[fd] = 0.

so it is, kernel can not save the last file which you opend. which phase you want get the path at?

The problem is I need to get complete path in lookup(). Lookup is the first thig kernel execute and in lookup I can't get complete path because I have a dentry structure...

cat foobar was an example I need to get the path in other operations too like "write..." but always in lookup function.

Any ideas about it?

Thanks in advance,

Sergio

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#6 lore raw
Quoted 25 lines · Sergio Paracuellos
Quoted 11 lines · winter

2005/10/27, Sergio Paracuellos <[email protected]>:

Quoted 6 lines
Quoted 2 lines

current file ?what is meaning?
for exmaple ,you opened 3 file, file1,file2, file3. which is current file?

Sorry, I want the last file I used. For example if I just have done "cat foobar" the file I want is this.

if you used the command "cat foobar", the linux kernel's do the following 3 phase for you:
1. open() --> sys_open() // in this phase, the filp struct is
create and save at

Quoted 8 lines
                                        // current->files->fd[x]. the x=fd.

2. read() --> sys_read() // in this phase, read file's data, the
fd is not changed.
3. close() --> sys_close() // in this phase, free the filp struct.
the result is

                                       // current->files->fd[fd] = 0.

so it is, kernel can not save the last file which you opend. which phase you want get the path at?

The problem is I need to get complete path in lookup(). Lookup is the first thig kernel execute and in lookup I can't get complete path because I have a dentry structure...

Quoted 8 lines

cat foobar was an example I need to get the path in other operations too like "write..." but always in lookup function.

Any ideas about it?

Thanks in advance,

Sergio

I solve my problem. I was wrong in my code. I was using like dentry current->fs->pwd but I had to use the dentry in use in lookup function.

Thanks to all.

Cheers,
Sergio

Quoted 9 lines
Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html