Skip to contentSkip to conversation

hwmon: lm90 documentation update

PATCH New Greg KH 1 participant 1 message Oct 29, 2005

Subsystems (3)
Documentation Hardware monitoring LM90 hardware monitor driver
lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 hwmon: lm90 documentation update

[PATCH] hwmon: lm90 documentation update

Update the I2C addresses for the ADM1032 and ADT7461 chips. Also update the links to the Analog Devices web site.

Signed-off-by Jean Delvare <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>

---
commit 90209b42d0498d57a804bf81fea427bf39c5315c
tree e6668317e71a45ed585ecdb27eafa0b285dc9f33
parent c3df5806cdae6fac678c662b527cb974bef4b60c
author Jean Delvare <[email protected]> Wed, 26 Oct 2005 22:20:21 +0200 committer Greg Kroah-Hartman <[email protected]> Fri, 28 Oct 2005 14:02:14 -0700

 Documentation/hwmon/lm90 |    8 ++++----
 drivers/hwmon/lm90.c     |   16 +++++++---------
 2 files changed, 11 insertions(+), 13 deletions(-)
Documentation/hwmon/lm90 +4 -4
index 70abf93..438cb24 100644
@@ -24,14 +24,14 @@ Supported chips:
                http://www.national.com/pf/LM/LM86.html
   * Analog Devices ADM1032
     Prefix: 'adm1032'
-    Addresses scanned: I2C 0x4c
+    Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product­M1032
+               http://www.analog.com/en/prod/0,2877,ADM1032,00.html
   * Analog Devices ADT7461
     Prefix: 'adt7461'
-    Addresses scanned: I2C 0x4c
+    Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product­T7461
+               http://www.analog.com/en/prod/0,2877,ADT7461,00.html
     Note: Only if in ADM1032 compatibility mode
   * Maxim MAX6657
     Prefix: 'max6657'
drivers/hwmon/lm90.c +7 -9
index fa0793e..83cf2e1 100644
@@ -31,7 +31,7 @@
  * Devices. That chip is similar to the LM90, with a few differences
  * that are not handled by this driver. Complete datasheet can be
  * obtained from Analog's website at:
- *   http://products.analog.com/products/info.asp?product­M1032
+ *   http://www.analog.com/en/prod/0,2877,ADM1032,00.html
  * Among others, it has a higher accuracy than the LM90, much like the
  * LM86 does.
  *

@@ -49,7 +49,7 @@
  * register values are decoded differently) it is ignored by this
  * driver. Complete datasheet can be obtained from Analog's website
  * at:
- *   http://products.analog.com/products/info.asp?product­T7461
+ *   http://www.analog.com/en/prod/0,2877,ADT7461,00.html
  *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and

@@ -83,10 +83,10 @@
  * Addresses to scan
  * Address is fully defined internally and cannot be changed except for
  * MAX6659.
- * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
- * LM89-1, and LM99-1 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658
+ * have address 0x4c.
+ * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d.
  * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
- * ADT7461 always has address 0x4c.
  */
 
 static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };

@@ -500,14 +500,12 @@ static int lm90_detect(struct i2c_adapte
 			}
 		} else
 		if (man_id = 0x41) { /* Analog Devices */
-			if (address = 0x4C
-			 && (chip_id & 0xF0) = 0x40 /* ADM1032 */
+			if ((chip_id & 0xF0) = 0x40 /* ADM1032 */
 			 && (reg_config1 & 0x3F) = 0x00
 			 && reg_convrate <= 0x0A) {
 				kind = adm1032;
 			} else
-			if (address = 0x4c
-			 && chip_id = 0x51 /* ADT7461 */
+			if (chip_id = 0x51 /* ADT7461 */
 			 && (reg_config1 & 0x1F) = 0x00 /* check compat mode */
 			 && reg_convrate <= 0x0A) {
 				kind = adt7461;