Skip to contentSkip to conversation

PROBLEM: b44 network driver performance

DISCUSSION Greg Mitchell 2 participants 2 messages Nov 8, 2005 – Nov 10, 2005

lore
Share & tools
lore
#0 lore raw

Summary: Poor performance of b44 driver

Description: I'm getting a transfer rate of 3 MB/s between two machines on the same 100 Mbit lan. Using Broadcom's bcm4400 driver (which I believe is GPL), I get 10 MB/s.

Kernel Version: 2.6.13 (vanilla) on a P4

I noticed when this problem was occurring, I frequently see the network interface going down and then up again in the logs. Other than swapping out the modules, I haven't done any other testing - so let me know if you need anything else.

Greg Mitchell

#1 lore raw
Quoted 7 lines · Greg Mitchell

Summary: Poor performance of b44 driver

Description: I'm getting a transfer rate of 3 MB/s between two machines on the same 100 Mbit lan. Using Broadcom's bcm4400 driver (which I believe is GPL), I get 10 MB/s.

Kernel Version: 2.6.13 (vanilla) on a P4

Too old, try 2.6.14.

Lee