2.6.15-rc1-mm2 on x86_64 build broken / 2.6.15-rc2 ok

FYI, on a 64-bit host:

make ARCH=um defconfig
make ARCH=um vmlinux
SYMLINK include/asm-um/ldt.h
CHK arch/um/include/uml-config.h
UPD arch/um/include/uml-config.h
gcc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -D__arch_um__ -DSUBARCH=\"x86_64\" -Dvmap=kernel_vmap -Din6addr_loopback=kernel_in6addr_loopback -Iarch/um/include -I/usr/src/linux-2.6.15-rc1-mm2-uml/arch/um/kernel/skas/include -D_FILE_OFFSET_BITS=64 -fno-builtin -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -S -o arch/um/user-offsets.s arch/um/sys-x86_64/user-offsets.c

  CHK     arch/um/include/user_constants.h
  CHK     include/linux/version.h
  UPD     include/linux/version.h

SYMLINK include/asm -> include/asm-um
SPLIT include/linux/autoconf.h -> include/config/*
gcc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fno-omit-frame-pointer -fno-optimize-sibling-calls -g -D__arch_um__ -DSUBARCH=\"x86_64\" -Iarch/um/include -I/usr/src/linux-2.6.15-rc1-mm2-uml/arch/um/kernel/skas/include -Dvmap=kernel_vmap -Din6addr_loopback=kernel_in6addr_loopback -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask -fno-unit-at-a-time -U__x86_64__ -fno-builtin -D_LARGEFILE64_SOURCE
-Wdeclaration-after-statement -nostdinc
-isystem /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/include -D__KERNEL__ -Iinclude -include include/linux/autoconf.h -S -o arch/um/kernel-offsets.s arch/um/sys-x86_64/kernel-offsets.c In file included from arch/um/include/um_mmu.h:17,

                 from include/asm/mmu.h:9,
                 from include/linux/sched.h:23,
                 from arch/um/sys-x86_64/kernel-offsets.c:3:
/usr/src/linux-2.6.15-rc1-mm2-uml/arch/um/kernel/skas/include/mmu-skas.h:11:21: asm/ldt.h: No such file or directory
In file included from arch/um/include/um_mmu.h:17,
                 from include/asm/mmu.h:9,
                 from include/linux/sched.h:23,
                 from arch/um/sys-x86_64/kernel-offsets.c:3:
/usr/src/linux-2.6.15-rc1-mm2-uml/arch/um/kernel/skas/include/mmu-skas.h:19: error: syntax error before "uml_ldt_t"
/usr/src/linux-2.6.15-rc1-mm2-uml/arch/um/kernel/skas/include/mmu-skas.h:19: warning: no semicolon at end of struct or union
In file included from include/asm/mmu.h:9,
                 from include/linux/sched.h:23,
                 from arch/um/sys-x86_64/kernel-offsets.c:3:

arch/um/include/um_mmu.h:25: error: field `skas' has incomplete type
make: *** [arch/um/kernel-offsets.s] Error 1

And although 2.6.15-rc1-mm2 builds fine on x86 hosts, I get this when cross-compiling it:
make ARCH=um SUBARCH=i386 vmlinux
CC arch/um/kernel/skas/clone.o
arch/um/kernel/skas/clone.c: In function `stub_clone_handler':
arch/um/include/sysdep/stub.h:41: error: can't find a register in class BREG' while reloading asm' arch/um/include/sysdep/stub.h:62: error: can't find a register in class BREG' while reloading asm' arch/um/include/sysdep/stub.h:51: error: can't find a register in class BREG' while reloading asm' arch/um/include/sysdep/stub.h:84: error: can't find a register in class BREG' while reloading asm'
make[2]: *** [arch/um/kernel/skas/clone.o] Error 1
make[1]: *** [arch/um/kernel/skas] Error 2
make: *** [arch/um/kernel] Error 2

Same error that was mentioned before, this one is gcc getting it wrong I seem to remember.

Also with patches.tar from sourceforge (dated 18/11/2005), I had to remove the zero length files as suggested by Rob.
x86 build fails with the same gcc problem as above and the amd64 build fails (from reading previous posts, I guess this is because ldt isn't done for x86_64):
CC arch/um/kernel/exec_kern.o
arch/um/kernel/exec_kern.c: In function `flush_thread':
arch/um/kernel/exec_kern.c:28: error: structure has no member named `tls_array'
arch/um/kernel/exec_kern.c:28: error: structure has no member named `tls_array'
make[1]: *** [arch/um/kernel/exec_kern.o] Error 1
make: *** [arch/um/kernel] Error 2

Last, 2.6.15-rc2 has the same gcc problems for x86, and amd64 fails with:

CC arch/um/sys-x86_64/sysrq.o
SYMLINK arch/um/sys-x86_64/thunk.S

  AS      arch/um/sys-x86_64/thunk.o
  AR      arch/um/sys-x86_64/lib.a
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1

/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.4/../../../../x86_64-pc-linux-gnu/bin/ld: init/built-in.o: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC init/built-in.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
KSYM .tmp_kallsyms1.S
nm: '.tmp_vmlinux1': No such file
No valid symbol.
make: *** [.tmp_kallsyms1.S] Error 1

Which can be worked around by enabling TT mode (or just static link?) I haven't tried to add -fPIC (not sure where it would go)

Antoine

-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_______________________________________________
User-mode-linux-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

A dummy implementation (ldt-x86_64.h) was later added.

I can make it work actually in an easy way, but that's a bit less efficient code. However fast broken code is useless, so I'll do that _for now_ - but I want to understand what's going on with your GCC. Will mail you after a bit more investigation (re-reading your mails too).

Ok, that's my TLS patches indeed - I haven't even started working on them for x86_64.

Probably the latter (static link)... However I must try compiling it, but no time now.

Inform me of my mistakes, so I can keep imitating Homer Simpson's "Doh!".
Paolo Giarrusso, aka Blaisorblade (Skype ID "PaoloGiarrusso", ICQ 215621894)
http://www.user-mode-linux.org/~blaisorblade

	

	
		
___________________________________ 
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB 
http://mail.yahoo.it



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
User-mode-linux-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel