2.6.15-rc4 RTC problems
Hi,
I am having troubles booting my 8-way P-III machine. On boot it hangs in init script boot.clock. It prints,
"Setting up the CMOS clock"
and hangs. So I disabled that script and brought up the machine and ran command manually. It looks like it waits forever to read from /dev/rtc.
Is this a known issue ? How do I fix the problem ?
Thanks,
Badari
# strace /sbin/hwclock --adjust -u
....
....
open("/dev/rtc", O_RDONLY|O_LARGEFILE) = 3
close(3) = 0
stat64("/etc/adjtime", {st_mode=S_IFREG|0644, st_size=44, ...}) = 0
open("/etc/adjtime", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=44, ...}) = 0
mmap2(NULL, 131072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40186000
read(3, "0.288490 1133479037 0.000000\n113"..., 131072) = 44
close(3) = 0
munmap(0x40186000, 131072) = 0
open("/dev/rtc", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, RTC_UIE_ON, 0) = 0
read(3, <unfinished ...>Quoted 10 lines · Badari Pulavarty
I am having troubles booting my 8-way P-III machine. On boot it hangs in init script boot.clock. It prints,
"Setting up the CMOS clock"
and hangs. So I disabled that script and brought up the machine and ran command manually. It looks like it waits forever to read from
/dev/rtc.
Quoted 5 lines
# strace /sbin/hwclock --adjust -u
....
open("/dev/rtc", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, RTC_UIE_ON, 0) = 0
read(3, <unfinished ...>Are you using HPET? (see dmesg)
Do some interrupts arrive? (see /proc/interrupts)
Regards,
Clemens