powerpc: Experimental support for new G5 Macs
Subsystems (3)
PATCH 1/1 powerpc: Experimental support for new G5 Macs
This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! If you have more than 2Gb of RAM, you MUST boot with mem=2G to limit it as the iommu/DART code for the new bridge chip is not there yet (hopefully tomorrow). There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine.
Signed-off-by Benjamin Herrenschmidt <[email protected]>
arch/powerpc/platforms/powermac/feature.c +48 -17
@@ -101,7 +101,8 @@ static const char *macio_names[] ="Keylargo" ,"Pangea" ,"Intrepid" , - "K2" +"K2" , + "Shasta", };
@@ -119,7 +120,7 @@ static const char *macio_names[] =static struct device_node *uninorth_node;static u32 __iomem *uninorth_base;static u32 uninorth_rev; -static int uninorth_u3; +static int uninorth_maj;static void __iomem *u3_ht;/*
@@ -1399,8 +1400,15 @@ static long g5_fw_enable(struct device_nstatic long g5_mpic_enable (struct device_node *node,long param,long value) {unsigned long flags; +struct device_node *parent =of_get_parent (node); +int is_u3; -if (node->parent ==NULL ||strcmp (node->parent->name,"u3" )) +if (parent ==NULL ) +return 0 ; + is_u3 =strcmp (parent->name,"u3" ) ==0 || +strcmp (parent->name,"u4" ) ==0 ; +of_node_put (parent); +if (!is_u3)return 0 ;LOCK (flags);
@@ -1464,7 +1472,7 @@ static long g5_i2s_enable(struct device_ }, }; -if (macio->type != macio_keylargo2/* && macio->type != macio_shasta*/ ) +if (macio->type != macio_keylargo2 && macio->type != macio_shasta)return -ENODEV ;if (strncmp (node->name,"i2s-" ,4 ))return -ENODEV ;
@@ -1473,11 +1481,9 @@ static long g5_i2s_enable(struct device_case 0 :case 1 :break ; -#if 0 case 2 :if (macio->type == macio_shasta)break ; -#endif default :return -ENODEV ; }
@@ -1508,7 +1514,7 @@ static long g5_reset_cpu(struct device_nstruct device_node *np; macio = &macio_chips[0 ]; -if (macio->type != macio_keylargo2) +if (macio->type != macio_keylargo2 && macio->type != macio_shasta)return -ENODEV ; np =find_path_device ("/cpus" );
@@ -1547,7 +1553,8 @@ static long g5_reset_cpu(struct device_n*/ void g5_phy_disable_cpu1 (void ) { -UN_OUT (U3_API_PHY_CONFIG_1 ,0 ); +if (uninorth_maj ==3 ) +UN_OUT (U3_API_PHY_CONFIG_1 ,0 ); }#endif /* CONFIG_POWER4 */
@@ -2462,6 +2469,14 @@ static struct pmac_mb_def pmac_mb_defs[]PMAC_TYPE_POWERMAC_G5_U3L , g5_features,0 , }, + { "PowerMac11,2", "PowerMac G5 Dual Core", +PMAC_TYPE_POWERMAC_G5_U3L , g5_features, +0 , + }, + { "PowerMac12,1", "iMac G5 (iSight)", +PMAC_TYPE_POWERMAC_G5_U3L , g5_features, +0 , + }, { "RackMac3,1", "XServe G5",PMAC_TYPE_XSERVE_G5 , g5_features, 0,
@@ -2574,6 +2589,11 @@ static int __init probe_motherboard(void pmac_mb.model_name ="Unknown K2-based" ; pmac_mb.features = g5_features;break ; +case macio_shasta: + pmac_mb.model_id =PMAC_TYPE_UNKNOWN_SHASTA ; + pmac_mb.model_name ="Unknown Shasta-based" ; + pmac_mb.features = g5_features; +break ;#endif /* CONFIG_POWER4 */ default :return -ENODEV ;
@@ -2651,7 +2671,12 @@ static void __init probe_uninorth(void)/* Locate G5 u3 */ if (uninorth_node ==NULL ) { uninorth_node =of_find_node_by_name (NULL ,"u3" ); - uninorth_u3 =1 ; + uninorth_maj =3 ; + } +/* Locate G5 u4 */ +if (uninorth_node ==NULL ) { + uninorth_node =of_find_node_by_name (NULL ,"u4" ); + uninorth_maj =4 ; }if (uninorth_node ==NULL )return ;
@@ -2664,12 +2689,13 @@ static void __init probe_uninorth(void)return ; uninorth_base =ioremap (address,0x40000 ); uninorth_rev =in_be32 (UN_REG (UNI_N_VERSION )); -if (uninorth_u3) +if (uninorth_maj ==3 || uninorth_maj ==4 ) u3_ht =ioremap (address +U3_HT_CONFIG_BASE ,0x1000 ); -printk (KERN_INFO "Found %s memory controller & host bridge," -" revision: %d\n" , uninorth_u3 ?"U3" :"UniNorth" , - uninorth_rev); +printk (KERN_INFO "Found %s memory controller & host bridge" +" @ 0x%08x revision: 0x%02x\n" , uninorth_maj ==3 ?"U3" : + uninorth_maj ==4 ?"U4" :"UniNorth" , + (unsigned int )address, uninorth_rev);printk (KERN_INFO "Mapped at 0x%08lx\n" , (unsigned long )uninorth_base);/* Set the arbitrer QAck delay according to what Apple does
@@ -2677,7 +2703,8 @@ static void __init probe_uninorth(void)if (uninorth_rev <0x11 ) { actrl =UN_IN (UNI_N_ARB_CTRL ) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK ; actrl |= ((uninorth_rev <3 ) ?UNI_N_ARB_CTRL_QACK_DELAY105 : -UNI_N_ARB_CTRL_QACK_DELAY ) <<UNI_N_ARB_CTRL_QACK_DELAY_SHIFT ; +UNI_N_ARB_CTRL_QACK_DELAY ) << +UNI_N_ARB_CTRL_QACK_DELAY_SHIFT ;UN_OUT (UNI_N_ARB_CTRL , actrl); }
@@ -2685,7 +2712,8 @@ static void __init probe_uninorth(void)* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI * memory timeout */ -if ((uninorth_rev >=0x11 && uninorth_rev <=0x24 ) || uninorth_rev ==0xc0 ) +if ((uninorth_rev >=0x11 && uninorth_rev <=0x24 ) || + uninorth_rev ==0xc0 )UN_OUT (0x2160 ,UN_IN (0x2160 ) &0x00ffffff ); }
@@ -2736,12 +2764,14 @@ static void __init probe_one_macio(const node->full_name);return ; } -if (type == macio_keylargo) { +if (type == macio_keylargo || type == macio_keylargo2) {u32 *did = (u32 *)get_property (node,"device-id" ,NULL );if (*did ==0x00000025 ) type = macio_pangea;if (*did ==0x0000003e ) type = macio_intrepid; +if (*did ==0x0000004f ) + type = macio_shasta; } macio_chips[i].of_node = node; macio_chips[i].type = type;
@@ -2840,7 +2870,8 @@ set_initial_features(void) }#ifdef CONFIG_POWER4 -if (macio_chips[0 ].type == macio_keylargo2) { +if (macio_chips[0 ].type == macio_keylargo2 || + macio_chips[0 ].type == macio_shasta) {#ifndef CONFIG_SMP /* On SMP machines running UP, we have the second CPU eating * bus cycles. We need to take it off the bus. This is done
arch/powerpc/platforms/powermac/pic.c +45 -27
103 lines not on this page · raw message
include/asm-powerpc/pmac_feature.h +2 -0
@@ -121,6 +121,7 @@#define PMAC_TYPE_IMAC_G5 0x152/* iMac G5 */ #define PMAC_TYPE_XSERVE_G5 0x153/* Xserve G5 */ #define PMAC_TYPE_UNKNOWN_K2 0x19f/* Any other K2 based */ +#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e/* Any other Shasta based */ /* * Motherboard flags
@@ -341,6 +342,7 @@ enum { macio_pangea, macio_intrepid, macio_keylargo2, + macio_shasta, };struct macio_chip
arch/powerpc/Kconfig +1 -0
@@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select MPIC_BROKEN_U3 select GENERIC_TBSYNC default y
arch/powerpc/kernel/prom.c +23 -3
@@ -298,6 +298,16 @@ static int __devinit finish_node_interruint i, j, n, sense;unsigned int *irq, virq;struct device_node *ic; +int trace =0 ; + +//#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0) +#define TRACE(fmt...) + +if (!strcmp (np->name,"smu-doorbell" )) + trace =1 ; + +TRACE ("Finishing SMU doorbell ! num_interrupt_controllers = %d\n" , + num_interrupt_controllers);if (num_interrupt_controllers ==0 ) {/*
@@ -332,11 +342,12 @@ static int __devinit finish_node_interru } ints = (unsigned int *)get_property (np,"interrupts" , &intlen); +TRACE ("ints=%p, intlen=%d\n" , ints, intlen);if (ints ==NULL )return 0 ; intrcells =prom_n_intr_cells (np); intlen /= intrcells *sizeof (unsigned int ); - +TRACE ("intrcells=%d, new intlen=%d\n" , intrcells, intlen); np->intrs =prom_alloc (intlen *sizeof (*(np->intrs)), mem_start);if (!np->intrs)return -ENOMEM ;
@@ -347,6 +358,7 @@ static int __devinit finish_node_interru intrcount =0 ;for (i =0 ; i < intlen; ++i, ints += intrcells) { n =map_interrupt (&irq, &ic, np, ints, intrcells); +TRACE ("map, irq=%d, ic=%p, n=%d\n" , irq, ic, n);if (n <=0 )continue ;
@@ -357,6 +369,7 @@ static int __devinit finish_node_interru np->intrs[intrcount].sense = map_isa_senses[sense]; }else { virq =virt_irq_create_mapping (irq[0 ]); +TRACE ("virq=%d\n" , virq);#ifdef CONFIG_PPC64 if (virq ==NO_IRQ ) { printk(KERN_CRIT "Could not allocate interrupt"
@@ -366,6 +379,12 @@ static int __devinit finish_node_interru#endif np->intrs[intrcount].line =irq_offset_up (virq); sense = (n >1 )? (irq[1 ] &3 ):1 ; + +/* Apple uses bits in there in a different way, let's +* only keep the real sense bit on macs +*/ +if (_machine ==PLATFORM_POWERMAC ) + sense &=0x1 ; np->intrs[intrcount].sense = map_mpic_senses[sense]; }
@@ -375,12 +394,13 @@ static int __devinit finish_node_interruchar *name =get_property (ic->parent,"name" ,NULL );if (name && !strcmp (name,"u3" )) np->intrs[intrcount].line +=128 ; -else if (!(name && !strcmp (name,"mac-io" ))) +else if (!(name && (!strcmp (name,"mac-io" ) || + !strcmp (name,"u4" ))))/* ignore other cascaded controllers, such as the k2-sata-root */ break; } -#endif +#endif /* CONFIG_PPC64 */ if (n >2 ) {printk ("hmmm, got %d intr cells for %s:" , n, np->full_name);
arch/powerpc/platforms/powermac/pci.c +179 -31
363 lines not on this page · raw message
arch/powerpc/sysdev/mpic.c +161 -40
324 lines not on this page · raw message
include/linux/pci_regs.h +1 -0
@@ -196,6 +196,7 @@#define PCI_CAP_ID_MSI 0x05/* Message Signalled Interrupts */ #define PCI_CAP_ID_CHSWP 0x06/* CompactPCI HotSwap */ #define PCI_CAP_ID_PCIX 0x07/* PCI-X */ +#define PCI_CAP_ID_HT_IRQCONF 0x08/* HyperTransport IRQ Configuration */ #define PCI_CAP_ID_SHPC 0x0C/* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_EXP 0x10/* PCI Express */ #define PCI_CAP_ID_MSIX 0x11/* MSI-X */
arch/powerpc/kernel/pci_64.c +30 -7
@@ -34,7 +34,7 @@#ifdef DEBUG #include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) +#define DBG(fmt...) printk(fmt)#else #define DBG(fmt...)#endif
@@ -323,6 +323,7 @@ static void pci_parse_of_addrs(struct de addrs = (u32 *)get_property (node,"assigned-addresses" , &proplen);if (!addrs)return ; +DBG (" parse addresses (%d bytes) @ %p\n" , proplen, addrs);for (; proplen >=20 ; proplen -=20 , addrs +=5 ) { flags =pci_parse_of_flags (addrs[0 ]);if (!flags)
@@ -332,6 +333,9 @@ static void pci_parse_of_addrs(struct deif (!size)continue ; i = addrs[0 ] &0xff ; +DBG (" base: %llx, size: %llx, i: %x\n" , + (unsigned long long )base, (unsigned long long )size, i); +if (PCI_BASE_ADDRESS_0 <= i && i <=PCI_BASE_ADDRESS_5 ) { res = &dev->resource[(i -PCI_BASE_ADDRESS_0 ) >>2 ]; }else if (i == dev->rom_base_reg) {
@@ -362,6 +366,8 @@ struct pci_dev *of_create_pci_dev(structif (type ==NULL ) type ="" ; +DBG (" create device, devfn: %x, type: %s\n" , devfn, type); +memset (dev,0 ,sizeof (struct pci_dev )); dev->bus = bus; dev->sysdata = node;
@@ -375,12 +381,14 @@ struct pci_dev *of_create_pci_dev(struct dev->subsystem_vendor =get_int_prop (node,"subsystem-vendor-id" ,0 ); dev->subsystem_device =get_int_prop (node,"subsystem-id" ,0 ); - dev->cfg_size =256 ;/*pci_cfg_space_size(dev);*/ + dev->cfg_size =pci_cfg_space_size (dev);sprintf (pci_name (dev),"%04x:%02x:%02x.%d" ,pci_domain_nr (bus), dev->bus->number,PCI_SLOT (devfn),PCI_FUNC (devfn)); dev->class =get_int_prop (node,"class-code" ,0 ); +DBG (" class: 0x%x\n" , dev->class); + dev->current_state =4 ;/* unknown power state */ if (!strcmp (type,"pci" )) {
@@ -402,6 +410,8 @@ struct pci_dev *of_create_pci_dev(structpci_parse_of_addrs (node, dev); +DBG (" adding to system ...\n" ); +pci_device_add (dev, bus);/* XXX pci_scan_msi_device(dev); */
@@ -418,15 +428,21 @@ void __devinit of_scan_bus(struct deviceint reglen, devfn;struct pci_dev *dev; +DBG ("of_scan_bus(%s) bus no %d... \n" , node->full_name, bus->number); +while ((child =of_get_next_child (node, child)) !=NULL ) { +DBG (" * %s\n" , child->full_name); reg = (u32 *)get_property (child,"reg" , ®len);if (reg ==NULL || reglen <20 )continue ; devfn = (reg[0 ] >>8 ) &0xff ; +/* create a new pci_dev for this device */ dev =of_create_pci_dev (child, bus, devfn);if (!dev)continue ; +DBG ("dev header type: %x\n" , dev->hdr_type); +if (dev->hdr_type ==PCI_HEADER_TYPE_BRIDGE || dev->hdr_type ==PCI_HEADER_TYPE_CARDBUS )of_scan_pci_bridge (child, dev);
@@ -446,16 +462,18 @@ void __devinit of_scan_pci_bridge(structunsigned int flags;u64 size; +DBG ("of_scan_pci_bridge(%s)\n" , node->full_name); +/* parse bus-range property */ busrange = (u32 *)get_property (node,"bus-range" , &len);if (busrange ==NULL || len !=8 ) { -printk (KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n" , +printk (KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n" , node->full_name);return ; } ranges = (u32 *)get_property (node,"ranges" , &len);if (ranges ==NULL ) { -printk (KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n" , +printk (KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n" , node->full_name);return ; }
@@ -509,10 +527,13 @@ void __devinit of_scan_pci_bridge(struct }sprintf (bus->name,"PCI Bus %04x:%02x" ,pci_domain_nr (bus), bus->number); +DBG (" bus name: %s\n" , bus->name); mode =PCI_PROBE_NORMAL ;if (ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode (bus); +DBG (" probe mode: %d\n" , mode); +if (mode ==PCI_PROBE_DEVTREE )of_scan_bus (node, bus);else if (mode ==PCI_PROBE_NORMAL )
@@ -528,6 +549,8 @@ void __devinit scan_phb(struct pci_contrint i, mode;struct resource *res; +DBG ("Scanning PHB %s\n" , node ? node->full_name :"<NO NAME>" ); + bus =pci_create_bus (NULL , hose->first_busno, hose->ops, node);if (bus ==NULL ) { printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
@@ -552,8 +575,9 @@ void __devinit scan_phb(struct pci_contr mode =PCI_PROBE_NORMAL ;#ifdef CONFIG_PPC_MULTIPLATFORM -if (ppc_md.pci_probe_mode) +if (node && ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode (bus); +DBG (" probe mode: %d\n" , mode);if (mode ==PCI_PROBE_DEVTREE ) { bus->subordinate = hose->last_busno;of_scan_bus (node, bus);
@@ -842,8 +866,7 @@ pgprot_t pci_phys_mem_access_prot(struct* Returns a negative error code on failure, zero on success. */ int pci_mmap_page_range (struct pci_dev *dev,struct vm_area_struct *vma, -enum pci_mmap_state mmap_state, -int write_combine) +enum pci_mmap_state mmap_state,int write_combine) {unsigned long offset = vma->vm_pgoff <<PAGE_SHIFT ;struct resource *rp;
arch/powerpc/kernel/udbg.c +2 -0
@@ -110,10 +110,12 @@ static int early_console_initialized;void __init disable_early_printk (void ) { +#if 1 if (!early_console_initialized)return ;unregister_console (&udbg_console); early_console_initialized =0 ; +#endif }/* called by setup_system */
arch/powerpc/platforms/powermac/setup.c +5 -4
@@ -345,7 +345,7 @@ void __init pmac_setup_arch(void)#ifdef CONFIG_SMP /* Check for Core99 */ -if (find_devices ("uni-n" ) ||find_devices ("u3" )) +if (find_devices ("uni-n" ) ||find_devices ("u3" ) ||find_devices ("u4" )) smp_ops = &core99_smp_ops;#ifdef CONFIG_PPC32 else
@@ -733,10 +733,11 @@ static int pmac_pci_probe_mode(struct pcstruct device_node *node = bus->sysdata;/* We need to use normal PCI probing for the AGP bus, -since the device for the AGP bridge isn't in the tree. */ -if (bus->self ==NULL &&device_is_compatible (node,"u3-agp" )) +* since the device for the AGP bridge isn't in the tree. +*/ +if (bus->self ==NULL && (device_is_compatible (node,"u3-agp" ) || +device_is_compatible (node,"u4-pcie" )))return PCI_PROBE_NORMAL ; - return PCI_PROBE_DEVTREE; }#endif
arch/powerpc/platforms/powermac/smp.c +171 -154
428 lines not on this page · raw message
arch/powerpc/sysdev/u3_iommu.c +12 -9
@@ -282,7 +282,7 @@ void iommu_init_early_u3(void)/* Find the DART in the device-tree */ dn =of_find_compatible_node (NULL ,"dart" ,"u3-dart" );if (dn ==NULL ) -return ; + goto bail;/* Setup low level TCE operations for the core IOMMU code */ ppc_md.tce_build = dart_build;
@@ -290,20 +290,23 @@ void iommu_init_early_u3(void) ppc_md.tce_flush = dart_flush;/* Initialize the DART HW */ -if (dart_init (dn)) { -/* If init failed, use direct iommu and null setup functions */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; - -/* Setup pci_dma ops */ -pci_direct_iommu_init (); - }else { +if (dart_init (dn) ==0 ) { ppc_md.iommu_dev_setup = iommu_dev_setup_u3; ppc_md.iommu_bus_setup = iommu_bus_setup_u3;/* Setup pci_dma ops */ pci_iommu_init (); + +return ; } + + bail: +/* If init failed, use direct iommu and null setup functions */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + +/* Setup pci_dma ops */ +pci_direct_iommu_init (); }
drivers/ide/ppc/pmac.c +1 -1
@@ -1686,7 +1686,7 @@ pmac_ide_probe(void)#else macio_register_driver (&pmac_ide_macio_driver);pci_register_driver (&pmac_ide_pci_driver); -#endif +#endif }#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
drivers/macintosh/smu.c +7 -1
@@ -53,7 +53,7 @@#undef DEBUG_SMU#ifdef DEBUG_SMU -#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0) +#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)#else #define DPRINTK(fmt, args...) do { } while (0)#endif
@@ -909,10 +909,13 @@ static struct smu_sdbp_header *smu_creatstruct property *prop;/* First query the partition info */ +DPRINTK ("SMU: Query partition infos ... (irq=%d)\n" , smu->db_irq);smu_queue_simple (&cmd,SMU_CMD_PARTITION_COMMAND ,2 , smu_done_complete, &comp,SMU_CMD_PARTITION_LATEST , id);wait_for_completion (&comp); +DPRINTK ("SMU: done, status: %d, reply_len: %d\n" , + cmd.cmd.status, cmd.cmd.reply_len);/* Partition doesn't exist (or other error) */ if (cmd.cmd.status !=0 || cmd.cmd.reply_len !=6 )
@@ -975,6 +978,8 @@ struct smu_sdbp_header *__smu_get_sdb_pasprintf (pname,"sdb-partition-%02x" , id); +DPRINTK ("smu_get_sdb_partition(%02x)\n" , id); +if (interruptible) {int rc; rc =down_interruptible (&smu_part_access);
@@ -986,6 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_pa part = (struct smu_sdbp_header *)get_property (smu->of_node, pname, size);if (part ==NULL ) { +DPRINTK ("trying to extract from SMU ...\n" ); part =smu_create_sdb_partition (id);if (part !=NULL && size) *size = part->len <<2 ;
include/asm-powerpc/mpic.h +2 -1
@@ -117,8 +117,9 @@ typedef int (*mpic_cascade_t)(struct pt_struct mpic_irq_fixup {u8 __iomem *base; +u8 __iomem *applebase;u32 data; -unsigned int irq; +unsigned int index; };#endif /* CONFIG_MPIC_BROKEN_U3 */
include/asm/hardirq.h +0 -3
@@ -11,13 +11,10 @@*/ typedef struct {unsigned int __softirq_pending;/* set_bit is used on this */ -unsigned int __last_jiffy_stamp; }____cacheline_aligned irq_cpustat_t ;#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ -#define last_jiffy_stamp (cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) -static inline void ack_bad_irq (int irq) {printk (KERN_CRIT "illegal vector %d received!\n" , irq);